Model: JGBP25DEM9WW

GE Barrier Door - Part# WB07K10342 is a replacement part for GE ovens. It is a door that is designed to provide an extra layer of protection against heat and steam when the oven is in use. The door is made of stainless steel and has a black finish. It has two handles on either side for easy openin...

The GE CAP-BURNER M (Part# WB29K10004) is a replacement burner cap for a variety of GE gas ranges. This part is designed to fit onto the top of the burner head and help to evenly distribute the heat from the flame. The cap also helps to protect the burner from dirt and debris, as well as helping t...

GE CKT SCREW - Part# WB01K10106 is a circuit screw manufactured by General Electric. It is used to secure electrical connections in a variety of applications, including wiring, circuit boards, and other electrical components. The screw is made of steel and has a zinc-plated finish for corrosion re...

GE Drawer Support Part# WB02K10163 is a replacement part for GE ovens. It is a metal support that attaches to the oven drawer and helps to keep it in place. The support is made of durable metal and is designed to fit most GE ovens. It has two mounting holes for easy installation and comes with scr...

GE ELECTRODE TOP - Part# WB13K10021 is a replacement part for a gas range. It is the top part of the electrode assembly, which is responsible for igniting the gas in the range. The electrode assembly consists of two parts: the electrode top and the electrode base. The electrode top is made of meta...

GE END SUPPORT RT - Part# WB07K10265 is a part used in GE ovens. It is an end support rail that helps to hold the oven racks in place. The part is made of metal and has two mounting holes for easy installation. It measures approximately 8 inches long and 1 inch wide. This part is designed to fit a...

The GE Front Orifice Holder (Part# WB28K10190) is a replacement part for a gas range. It is used to hold the orifice in place in the front of the range. The orifice holder is made of metal and has two screws that secure it to the range. It is designed to fit all GE gas ranges and can be used with ...

GE GASKET ASM. DOOR - Part# WB04K10029 is a replacement part for General Electric (GE) ovens. It is a gasket assembly that fits around the door of the oven to provide a tight seal and prevent heat from escaping. The gasket is made of durable rubber and is designed to last for many years. This part...

GE GRATE (GRAY) - Part# WB31K10035 is a replacement part for a range top burner grate. It is made of gray porcelain-coated cast iron and is designed to fit select GE, Hotpoint, and Kenmore gas ranges. This part measures approximately 10.5 inches in diameter and has four mounting holes for easy ins...

GE HANDLE WH - Part# WB15K10096 is a replacement handle for GE ovens. It is made of white plastic and has a chrome finish. The handle measures approximately 11 inches long and 1.5 inches wide. It is designed to fit most GE oven models, including the JB250DF, JB255DF, JB256DF, JB257DF, JB258DF, and...

The GE KNOB MINIVALVE (Part# WB03K10218) is a replacement part for a range or oven. It is a knob and valve assembly that controls the flow of gas to the appliance. The knob is used to turn the gas on and off, while the valve regulates the flow of gas. The valve is designed to shut off the gas supp...

GE LATCH ASSEMBLY - Part# WB02K10140 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the catch. The latch is a metal piece that fits into the door frame and has a spring-loaded lever t...

GE ORIFICE-LP L Part# WB28K10023 is a replacement part for a gas range. It is an orifice that regulates the flow of gas to the burner. The orifice is made of brass and has a male 3/8" thread. It is used to control the amount of gas that flows to the burner, allowing for precise temperature control...

The GE Panel Drawer (White) - Part# WB36K10033 is a replacement part for a range or oven. It is a white panel drawer that fits into the bottom of the range or oven and provides storage space for cookware and other items. The drawer is made of durable plastic and features a handle for easy access. ...

GE Rear Orifice H L 150N 9500 - Part# WB28K10191 is a part used in gas ranges and ovens. It is a rear orifice that connects the gas line to the burner. The orifice is made of brass and has a 1/2" NPT thread size. It has an opening of 0.150" and a maximum pressure rating of 9500 BTU/hr. This part i...

GE Rear Orifice HR 150N 9500 Part# WB28K10188 is a part for a gas range. It is a rear orifice, which is the part of the gas range that connects the gas line to the burner. This particular part is designed for use with GE's HR 150N 9500 series of gas ranges. It has a maximum BTU rating of 150,000 B...

The GE Round Valve Burner Part# WB28K10578 is a replacement part for a variety of GE gas ranges. This round valve burner is designed to replace the original burner on the range and is made from durable metal construction. The burner has a round shape and features an adjustable air shutter that all...

GE SCR 10-16PL PNT 2.22S - Part# WB01K10073 is a range surface element switch manufactured by General Electric. It is a single pole, double throw (SPDT) switch with a 10-16 amp rating and a 2.22 inch diameter mounting hole. The switch has two positions, one for the "on" position and one for the "o...

GE SCREW - Part# WB01K10043 is a replacement part for GE appliances. It is a screw that is used to secure the top panel of the appliance to the frame. The screw measures approximately 1/4 inch in diameter and is made of metal. It has a Phillips head and comes with a black finish. This part is comp...

GE SCREW 8-22 PL 1HX 71 - Part# WB01K10012 is a part manufactured by General Electric. It is a self-tapping screw made of steel and has a Phillips head. The screw has an 8-22 thread size, meaning that it has 8 threads per inch and the major diameter of the thread is 22mm. The “PL” in the part numb...

GE SPACER - Part# WB02K10161 is a replacement part for a range or oven. It is a black plastic spacer that fits between the oven door and the frame of the oven. The spacer helps to keep the door in place and prevents it from rattling or moving around when the oven is in use. It also helps to provid...

The GE SPARK MODULE 4+0 Part# WB13K10029 is a four-burner spark module designed for use with GE gas ranges. This module is used to ignite the gas burners on the range and includes four spark electrodes and a spark generator. The spark generator produces a high voltage electrical current that is se...

GE TRIM BOTTOM ASM - Part# WB07K10250 is a replacement part for GE ovens. It is a trim bottom assembly that fits the bottom of the oven and helps to keep the heat in. The trim bottom assembly includes a metal frame, insulation, and plastic trim pieces. The metal frame is designed to fit snugly aro...