Model: JGB918SEK3SS

GE Bumper Blue Part# WB02K10112 is a replacement part for GE ovens. It is a blue plastic bumper that is used to protect the oven door from damage when it is opened and closed. The bumper fits around the edge of the oven door and helps to keep it from hitting the frame of the oven when it is opened...

GE CAP BURNER - Part# WB29K10040 is a replacement burner cap for GE gas ranges. It is designed to fit specific GE gas range models and is made of durable metal material. The cap helps to keep the flame from spreading out of the burner, and it also helps to keep the burner clean. This part comes wi...

GE CATCH Part# WB02K10110 is a part used in some GE ovens. It is a catch that helps to keep the oven door closed and secure. The catch is made of metal and has two parts: a spring-loaded latch and a strike plate. The latch attaches to the oven door, while the strike plate attaches to the oven fram...

GE FAN COVER BACK - Part# WB34K10038 is a replacement part for a range hood fan. It is made of metal and is designed to fit GE range hoods. The fan cover back helps to protect the fan motor from dust and debris, as well as keep the fan blades from becoming damaged. It also helps to reduce noise le...

GE FAN MOTOR CONVECT-2SPEED - Part# WB26K10003 is a two-speed fan motor manufactured by General Electric. It is designed to be used in a variety of applications, including air conditioners, heat pumps, and furnaces. The motor has two speeds, low and high, which can be adjusted depending on the app...

GE GASKET ASM DOOR - Part# WB04K10016 is a replacement part for General Electric (GE) ovens. It is a gasket assembly that seals the door of the oven. The gasket helps to keep heat and moisture inside the oven, while also preventing air from entering. This part is made of durable rubber and is desi...

GE GASKET DRAWER ASM - Part# WB04K10017 is a replacement part for GE ovens. It is a gasket that seals the drawer assembly to the oven cavity. The gasket helps to keep heat and moisture from escaping the oven cavity, ensuring that food cooks evenly and efficiently. The gasket is made of durable rub...

GE GASKET LOWER - Part# WB04K10018 is a replacement part for GE range ovens. It is a black rubber gasket that fits around the lower oven door and helps to create a seal between the door and the oven cavity. This gasket helps to keep heat in the oven cavity, which helps to ensure even cooking tempe...

GE Harness Module - Part# WB18K10027 is a replacement part for GE dryers. It is a wiring harness that connects the main control board to the other components in the dryer. The module includes two wires, one for the motor and one for the heating element. This part is used to replace a faulty or dam...

GE Heating Element Bottom - Part# WB44K10015 is a replacement part for GE electric ovens. It is the bottom heating element that helps to heat the oven. This part is made of metal and has two terminals at the end that connect to the oven's wiring harness. The element is designed to heat up quickly ...

GE Heating Element Top - Part# WB44K10014 is a replacement part for GE electric ovens. It is the top heating element in the oven and is responsible for providing the heat necessary to cook food. The part is made of metal and has two terminals that connect to the wiring harness of the oven. It also...

GE LENS - Part# WB25K10009 is a replacement lens for GE range hoods. It is designed to fit a variety of GE range hood models and is made of durable, heat-resistant glass. The lens measures 8-1/2 inches in diameter and has a black finish. It is designed to provide an even distribution of light over...

GE Light Indicator Pilot Part# WB25K10010 is a replacement part for GE gas ovens. It is a small metal cylinder with a red light on the end that serves as an indicator for when the oven is in use. The pilot light will turn on when the oven is turned on and will stay lit until the oven has been turn...

The GE Orifice Holder Assembly (Part# WB28K10295) is a replacement part for GE gas ranges. It is used to hold the orifice in place and ensure that it is properly aligned with the gas burner. The orifice holder assembly includes the orifice holder, two screws, and a gasket. The orifice holder is ma...

GE Orifice Spud Part# WB28K10288 is a replacement part for GE gas ranges. It is an orifice spud that is used to regulate the flow of gas to the burners. The orifice spud has a threaded end that screws into the burner and a tapered end that fits into the orifice. The orifice spud helps to ensure th...

GE SCR M4X.7 TT RNT-15 S - Part# WB01K10046 is a 15 Amp, 120/240 Volt, Single Pole, Self-Contained Combination Type Arc Fault Circuit Interrupter (AFCI) and Ground Fault Circuit Interrupter (GFCI) Receptacle. This device is designed to protect against electrical shock and fire hazards due to arcin...

GE SCREW 10-32 HXW 9/16 DWR - Part# WB01K10047 is a screw manufactured by General Electric. It is a 10-32 thread size, hex washer head type, and 9/16 inch diameter. The screw is designed for use in dryers and other appliances. It is made of steel and has a zinc plated finish for corrosion resistan...

GE SCREW 10-32 MTG HANDLE - Part# WB01K10009 is a mounting handle for a General Electric (GE) appliance. It is made of plastic and is used to secure the appliance to the wall or cabinet. The handle has a 10-32 thread size and comes with two screws for installation. The handle measures 3 inches in ...

GE Strike is a part number for a range surface burner igniter manufactured by General Electric. It is used to ignite the gas in the burners of a range or stove. The igniter works by using an electric current to heat up a small metal coil, which then produces a spark that lights the gas. This part ...

GE SWITCH BURNE - Part# WB24K10002 is a replacement part for a range burner switch. It is designed to replace the existing switch on the range burner and is compatible with select GE and Hotpoint ranges. The switch has two terminals and a knob that can be turned to control the heat of the burner. ...

GE Thermostat Part# WB20K10017 is a digital thermostat designed to provide precise temperature control for residential and light commercial applications. It features a large, easy-to-read LCD display and simple push-button operation. The thermostat can be programmed to maintain a comfortable tempe...

Range fan support, Part# WB02K10034, is a part used in many ovens and ranges to support the fan. It is typically made of metal and is designed to hold the fan in place. The part is used to secure the fan motor and blades to the range or oven, ensuring that they remain in place during operation. Th...