Model: JGB908BEK9BB

GE CAP BURNER - Part# WB29K10038 is a replacement burner cap for GE gas ranges. It is designed to fit onto the burner head of a GE gas range and provide an even heat distribution across the cooking surface. The cap is made of durable porcelain-coated steel and features a flat design with four roun...

The GE CLAMP-HEAT ELEMENT - Part# WB02K10023 is a replacement part for a range or oven. It is a heating element that clamps onto the back wall of the oven and provides heat to the oven cavity. The element is made of metal and has two prongs that fit into slots in the back wall of the oven. The ele...

GE GASKET ASM DOOR - Part# WB04K10016 is a replacement part for General Electric (GE) ovens. It is a gasket assembly that seals the door of the oven. The gasket helps to keep heat and moisture inside the oven, while also preventing air from entering. This part is made of durable rubber and is desi...

GE GASKET FRONT FRAME - Part# WB04K10021 is a replacement part for GE brand ovens. It is a gasket that seals the front frame of the oven to the oven cavity. The gasket helps to keep heat and smoke from escaping the oven cavity, and also helps to keep moisture out of the oven cavity. This part is m...

GE GRATE CAST (DD) LF - Part# WB31K10213 is a replacement part for a GE range. It is a cast iron grate that fits on the left front burner of the range. The grate is made of durable cast iron and has a black finish. It measures approximately 10 inches by 10 inches and has four raised feet to keep i...

GE GRATE CAST MID (DD) - Part# WB31K10209 is a replacement part for a GE range. It is the middle grate of the cast iron grates that are used to cover the burners on a GE range. This part is made of cast iron and is designed to fit GE ranges with two or three burners. The part number WB31K10209 is ...

The GE Griddle Kit (Part# WB31K10217) is a replacement part for select GE gas ranges. It is designed to provide an even cooking surface for pancakes, eggs, and other breakfast foods. The kit includes a non-stick griddle, two support brackets, and mounting hardware. The griddle is made of heavy-dut...

GE Harness Module - Part# WB18K10027 is a replacement part for GE dryers. It is a wiring harness that connects the main control board to the other components in the dryer. The module includes two wires, one for the motor and one for the heating element. This part is used to replace a faulty or dam...

GE Knob-Top Burners (BLK) - Part# WB03K10135 are replacement burners for GE gas ranges. They are designed to fit specific models of GE gas ranges and provide a reliable and efficient cooking experience. The knob-top design allows for easy adjustment of the flame size, while the black finish adds a...

GE KNOB-TOP BURNERS (WH) - Part# WB03K10137 are replacement burners for GE gas ranges. They are designed to fit most GE gas ranges and provide a reliable and efficient cooking experience. The burners feature a knob-top design, which allows for easy adjustment of the flame size. The burners are mad...

GE ONE SWITCH MOTOR LATCH - Part# WB02K10136 is a replacement part for GE dishwashers. It is a motor latch that is used to secure the dishwasher door in place when it is closed. The latch is made of plastic and has two metal prongs that fit into the dishwasher door frame. When the door is closed, ...

The GE Orifice Holder Assembly (Part# WB28K10295) is a replacement part for GE gas ranges. It is used to hold the orifice in place and ensure that it is properly aligned with the gas burner. The orifice holder assembly includes the orifice holder, two screws, and a gasket. The orifice holder is ma...

GE Orifice Spud Part# WB28K10288 is a replacement part for GE gas ranges. It is an orifice spud that is used to regulate the flow of gas to the burners. The orifice spud has a threaded end that screws into the burner and a tapered end that fits into the orifice. The orifice spud helps to ensure th...

GE SCR 8 HD 10-32 - Part# WB01K10066 is a stainless steel screw that is used to secure the top grates of GE gas ranges. It is designed to fit into a 10-32 threaded hole and has a head diameter of 8mm. The screw is made from stainless steel for durability and corrosion resistance. It is an OEM (Ori...

GE SCR M4X.7 TT RNT-15 S - Part# WB01K10046 is a 15 Amp, 120/240 Volt, Single Pole, Self-Contained Combination Type Arc Fault Circuit Interrupter (AFCI) and Ground Fault Circuit Interrupter (GFCI) Receptacle. This device is designed to protect against electrical shock and fire hazards due to arcin...

GE SPEEDNUT Part# WB01K10093 is a fastening device used to secure two or more objects together. It is a self-locking nut that requires no tools for installation and can be easily removed with a flathead screwdriver. The nut is made of steel and has a zinc plated finish for corrosion resistance. It...

GE SW VALVE SERVICE 270 1WI - Part# WB24K10024 is a service valve used in gas-fired appliances. It is designed to provide a safe and reliable connection between the appliance and the gas supply line. The valve is designed to shut off the gas supply in the event of an emergency, such as a fire or e...

GE SW VALVE SERVICE 270 2WI - Part# WB24K10023 is a two-way service valve manufactured by General Electric. It is designed to be used in residential and commercial water systems. The valve is made of brass and features a 1/2" female NPT inlet and outlet, with a maximum pressure rating of 200 PSI. ...

The GE Temperature Sensor Part# WB20K10015 is a temperature sensing device designed to detect and measure the temperature of air, liquids, and surfaces. It is typically used in HVAC systems to monitor and control the temperature of a room or area. The sensor has a range of -40°F to 140°F (-40°C to...

GE TRIM FRONT BOTTOM - Part# WB01K10072 is a replacement part for GE refrigerators. It is a plastic trim piece that fits on the bottom of the refrigerator door. It helps to provide a finished look to the refrigerator and also helps to keep food and other items from falling out of the refrigerator ...

Range drawer gasket Part# WB04K10003 is a replacement part for many GE and Hotpoint ovens. It is a rubber gasket that seals the gap between the range drawer and the oven cavity. This gasket helps to keep heat and moisture from escaping from the oven cavity, ensuring that your food cooks evenly and...