Model: JGB860EEJ7ES

GE CLIP-WIRE Part# WB02X21679 is a replacement part for General Electric (GE) range/stove/ovens. It is a wire clip that is used to secure the wires in place. The clip is made of metal and has two prongs that are used to attach the wires to the back of the range/stove/oven. This part is used to ens...

GE Electrodes & Harness H.V - Part# WB18X26985 is a high voltage electrode and harness assembly for use in General Electric (GE) ovens. This part is used to connect the oven's heating elements to the power source. It includes two electrodes, two harnesses, and a high voltage connector. The electro...

The GE Glowbar Igniter Part# WB13X25633 is a replacement part for a gas oven or range. It is an igniter that produces a spark to ignite the gas in the oven or range. The igniter is made of a metal alloy and has two ceramic glow bars that glow when heated by electricity. The igniter is connected to...

GE GRATE ASM - Part# WB31X27151 is a replacement part for GE gas ranges. It is the grate assembly for the cooktop, which includes the grates and burner caps. The grate assembly helps to evenly distribute heat across the cooktop surface and protect the burners from spills and splatters. The WB31X27...

GE Griddle Aluminum is a replacement part for GE ranges and cooktops. It is made of aluminum and is designed to fit over the burners on the range or cooktop. The griddle provides a flat cooking surface that can be used for cooking pancakes, eggs, bacon, and other breakfast foods. The griddle also ...

The GE Igniter Glowbar (Part# WB13X24924) is a replacement part for a gas oven. It is an igniter that helps to ignite the gas in the oven, allowing it to heat up and cook food. The glowbar is made of a metal alloy that glows when heated, which is what ignites the gas. The glowbar has two electrica...

The GE Ignition Module Part# WB13X24741 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic control board that controls the oven’s ignition system, which is responsible for lighting the oven’s burner. The module includes a spark igniter, spark electrode, and safety ...

GE Kit Nat Conversion Asm - Part# WB49X26122 is a conversion kit assembly designed for use with select GE gas ranges. This kit allows the range to be converted from natural gas to liquid propane. It includes all the necessary components to make the conversion, including a regulator, orifice, hose,...

GE KNOB - Part# WB03X24818 is a replacement part for General Electric (GE) range and ovens. It is a plastic knob that controls the temperature of the oven. The knob has a black finish with white indicator lines and numbers. It is designed to fit specific GE models and replaces part numbers WB03T10...

GE LATCH AUTOMATIC - Part# WB10X24930 is a replacement part for GE ovens. It is an automatic latch that helps to keep the oven door closed and secure during cooking. The latch is made of durable plastic and metal components, and it is designed to fit most GE oven models. The latch features a sprin...

The GE LF Orifice Holder - Part# WB28X24764 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two small screws that are used to secure it in place. The orif...

The GE Orifice Holder LR - Part# WB28X24766 is a replacement part for a gas range. It is used to hold the orifice in place and is made of metal. The orifice holder is located inside the burner assembly and helps to regulate the flow of gas to the burner. This part fits specific General Electric ma...

The GE Orifice Holder RF Part# WB28X24761 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two screws that secure it to the burner. It also has an O-ring t...

The GE Orifice Holder RR Part# WB28X24763 is a replacement part for GE gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas valve and the burner. The orifice holder is made of metal and has two screws that secure it to the gas valve. It also has a sma...

GE Panel Side - Part# WB56X29670 is a replacement part for GE refrigerator models. It is a white plastic panel that fits on the side of the refrigerator and helps to keep the temperature consistent inside the appliance. The panel also helps to reduce noise from the refrigerator's compressor. This ...

The GE Plunger Switch - Part# WB24X27550 is a replacement part for many GE ovens. It is a single-pole, double-throw (SPDT) switch that is used to control the oven's bake and broil functions. The plunger switch has two terminals and a plunger that can be pushed in or pulled out to change the positi...

The GE Range LP High Altitude Kit (Part# WB28X29255) is a kit designed to help ensure that your gas range functions properly at high altitudes. The kit includes a pressure regulator, a venturi tube, and an orifice. The pressure regulator helps to reduce the amount of gas pressure that is delivered...

The GE Range Ng High Altitude Kit - Part# WB28X29254 is a kit designed to help adjust the performance of a gas range in high altitude areas. The kit includes an air shutter, air shutter spring, and an instruction sheet. The air shutter is used to adjust the amount of air that enters the burner whe...

) GE Rangetop & Brkt Asm (Dropshi - Part# WB62X24822) is a replacement part for a GE range. It is an assembly that includes the rangetop and bracket. The rangetop is the top surface of the range, where the burners and other cooking elements are located. The bracket is used to secure the rangetop to...

GE SCREW 10-16 - Part# WB01K10116 is a 10-16 x 1/2 inch self-tapping screw manufactured by General Electric. It is made of steel and has a zinc plated finish. This screw is used to secure parts together in many different applications, such as securing panels, cabinets, and other items. The head of...

GE Sensor Assembly (Part# WB24X25056) is a replacement part for GE ovens. It is a temperature sensor assembly that helps to regulate the temperature inside the oven. The sensor assembly includes a thermistor, which is a temperature-sensitive resistor that changes its resistance with changes in tem...

GE Sensor Assembly - Part# WB24X25557 is a replacement part for General Electric (GE) brand dryers. It is a temperature sensor assembly that helps regulate the temperature of the dryer. The sensor assembly includes a thermistor, which is a type of resistor that changes its resistance with temperat...

GE Tube Upper Bake Supply - Part# WB28X20758 is a replacement part for GE ovens. It is the upper bake element supply tube that connects the bake element to the oven's power source. This part is made of metal and is approximately 16 inches long. It has two terminals at one end and a single terminal...

The GE Valve Burner 270 Part# WB21X20394 is a replacement part for a variety of GE gas ranges. It is a valve burner that controls the flow of gas to the burners on the range. The valve burner has two ports, one for the main burner and one for the pilot light. The valve burner is made of metal and ...

HINGE ASM RH (Right Hand) Part# WB10X28782 is a replacement part for a range of General Electric (GE) ovens. It is the right hand side hinge assembly for the oven door. This part includes the hinge, mounting screws, and other necessary hardware. The hinge is made of metal and plastic and is design...

The Receiver Hinge, Part# WB10X26561, is a part used in some GE and Hotpoint brand refrigerators. It is a plastic part that attaches to the back of the refrigerator door and helps to support the door when it is opened and closed. The hinge has two parts: a receiver and a pin. The receiver is mount...

The Receiver Hinge LH (Part# WB10X29636) is a part used in some General Electric (GE) ovens. It is the left-hand side of the receiver hinge assembly, which connects the oven door to the oven frame. The receiver hinge assembly consists of two parts: the left-hand side (LH) and right-hand side (RH)....

The Receiver Hinge RH (Part# WB10X29635) is a replacement part for a range or oven. It is the right-hand side of the hinge assembly and is used to attach the oven door to the range. The hinge consists of two parts: the receiver and the hinge arm. The receiver is mounted to the range frame and has ...