Model: JGB645SEK3SS

GE Bracket Drawer Part# WB02X24742 is a replacement part for GE ovens. It is a bracket drawer that attaches to the bottom of the oven and holds the drawer in place. The bracket is made of metal and has two holes for mounting screws. This part is used to replace a worn or damaged bracket drawer on ...

GE Control Oven To9 - Part# WB27X29139 is a replacement oven control board for General Electric ovens. It is designed to replace the original control board in select GE ovens and ranges. This control board is responsible for controlling the temperature, timer, and other functions of the oven. It f...

GE END SUPPORT DD - Part# WB07X29143 is a part for a General Electric microwave oven. It is an end support for the turntable tray in the oven. This part is made of metal and is used to hold the turntable tray in place. It has two mounting holes on either side and comes with two screws for installa...

GE END SUPPORT DD - Part# WB07X29144 is a part used in some GE ovens. It is an end support for the oven door. This part helps to keep the door in place and provide stability when opening and closing the oven door. The part is made of metal and is designed to fit into the existing holes on the oven...

GE GASKET ASM DOOR - Part# WB35X29668 is a replacement part for a General Electric oven. It is a door gasket assembly that fits around the oven door to create an airtight seal. This helps to keep heat and moisture inside the oven, which helps to ensure that food cooks evenly and efficiently. The g...

GE Grate Asm - Part# WB31X26620 is a replacement part for GE gas ranges. It is a grate assembly that includes two grates and four mounting screws. The grates are made of cast iron and have a black finish. The grates are designed to fit over the burners on the range, providing even heat distributio...

The GE Igniter Glowbar (Part# WB13X25261) is a replacement part for a gas oven. It is an electrical component that ignites the gas in the oven when it is turned on. The glowbar is made of a metal alloy that glows red hot when electricity passes through it, creating enough heat to ignite the gas. T...

The GE Ignition Module Part# WB13X24323 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic component that controls the ignition of the oven’s gas burners. The module works by sending an electrical signal to the spark igniter, which then ignites the gas. The module ...

GE KNOB ASM - Part# WB03X26675 is a replacement part for General Electric (GE) range/ovens. It is a knob assembly that includes the knob, shaft, and clip. The knob is used to control the temperature of the oven or range. The clip attaches the knob to the shaft, which is connected to the temperatur...

The GE LF Orifice Holder - Part# WB28X24764 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two small screws that are used to secure it in place. The orif...

GE Manifold Tube Supply - Part# WB28X24772 is a replacement part for GE refrigerators. It is a tube that supplies water to the refrigerator's ice maker and water dispenser. The tube is made of plastic and measures approximately 4 feet in length. It has two fittings on either end, one for the water...

The GE Orifice Holder - Part# WB28X26621 is a replacement part for gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two screws that secure it to the range. It also has a small hole i...

The GE Orifice Holder LR - Part# WB28X24766 is a replacement part for a gas range. It is used to hold the orifice in place and is made of metal. The orifice holder is located inside the burner assembly and helps to regulate the flow of gas to the burner. This part fits specific General Electric ma...

The GE Orifice Holder RR Part# WB28X24763 is a replacement part for GE gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas valve and the burner. The orifice holder is made of metal and has two screws that secure it to the gas valve. It also has a sma...

The GE Orifice Spud - Part# WB28X26625 is a replacement part for gas ranges and cooktops. It is used to regulate the flow of gas from the main gas line to the burner. The orifice spud is a small metal disc with a hole in the center that fits into the burner head. The size of the hole determines ho...

The GE Oven Orifice Spud is a part used in gas ovens to regulate the flow of gas. It is a metal spud with a threaded end that screws into the gas valve. The orifice spud has a hole in the center that allows the gas to flow through it and into the oven. The size of the hole determines how much gas ...

GE Overlay T09 - Part# WB07X25217 is a replacement part for General Electric (GE) range and ovens. It is an overlay panel that covers the control panel of the range or oven. This part is made of stainless steel and is designed to fit specific GE models. It includes a trim piece, mounting screws, a...

GE Panel Side - Part# WB56X29670 is a replacement part for GE refrigerator models. It is a white plastic panel that fits on the side of the refrigerator and helps to keep the temperature consistent inside the appliance. The panel also helps to reduce noise from the refrigerator's compressor. This ...

The GE Range Broil Burner Part# WB16K10086 is a replacement part for a range or oven. It is a burner that is used to broil food in the oven. The burner has two settings, high and low, and can be adjusted to provide the desired level of heat. The burner is made of stainless steel and has a black fi...

GE TRIM DOOR DD - Part# WB07X29147 is a trim door for General Electric (GE) brand microwave ovens. It is a replacement part for GE microwaves and is designed to fit specific models of GE microwaves. The trim door is made of durable plastic and features a black finish. It has two mounting holes on ...

The GE Valve Burner 270 Part# WB21X20260 is a replacement part for GE gas ranges. It is a single-valve burner that is used to control the flow of gas to the burners on the range. The valve has two ports, one for the gas supply and one for the burner. The valve is designed to be adjustable so that ...

The GE Valve Burner 270 Part# WB21X20262 is a replacement part for GE gas ranges. It is a single-valve burner assembly that includes the valve, knob, and burner head. The valve controls the flow of gas to the burner head, which in turn produces heat for cooking. The knob allows you to adjust the f...

The GE Valve Burner 274 - Part# WB21X20261 is a replacement part for GE gas ranges. It is a gas valve burner assembly that includes the burner, the valve, and the igniter. The valve controls the flow of gas to the burner, while the igniter sparks to ignite the gas. This part is used to replace a f...

GE Vent Trim - Part# WB07X26937 is a replacement part for GE range hoods. It is a trim piece that fits around the vent opening of the range hood. The trim piece is made of stainless steel and has a brushed finish. It measures approximately 8-1/2 inches wide by 3-3/4 inches high and has two mountin...

A Hinge Door (Part# WB10X21659) is a type of door that is attached to a frame by two or more hinges. It is typically used in residential and commercial applications, such as interior and exterior doors. The door opens by swinging outward or inward, depending on the type of hinge used. This particu...

Range control bracket - Part# WB02X24845 is a part used in some GE and Hotpoint ovens. It is a metal bracket that attaches to the back of the oven and helps to secure the range control panel in place. The bracket also helps to provide support for the range control panel, which can be easily damage...

Range drawer glider Part# WB02X26847 is a replacement part for a range drawer. It is used to help the drawer slide in and out of the range. The glider is made of plastic and has two metal tracks that attach to the sides of the drawer. The glider also has two metal tabs that fit into slots on the b...