Model: JGB645DEK2BB

The Burner Large V2 - Part# WB16X24723 is a replacement part for a range or oven. It is a large burner that is used to provide heat to the cooking surface. The burner has two parts: the burner head and the burner base. The burner head is made of stainless steel and has a large diameter of 8 inches...

GE Bracket Drawer Part# WB02X24742 is a replacement part for GE ovens. It is a bracket drawer that attaches to the bottom of the oven and holds the drawer in place. The bracket is made of metal and has two holes for mounting screws. This part is used to replace a worn or damaged bracket drawer on ...

GE BUMPER - Part# WB02X24790 is a replacement part for GE range and ovens. It is a black plastic bumper that is used to protect the range or oven from damage when it is opened and closed. The bumper fits around the edge of the range or oven door and helps to reduce noise when the door is opened an...

GE Burner Bake Part# WB16X20463 is a replacement part for GE ovens. It is a burner bake element that is used to heat the oven. The element is made of metal and has two terminals at the back that connect to the wiring harness. The element is designed to evenly distribute heat throughout the oven ca...

The GE Burner Small V2 - Part# WB16X24721 is a replacement part for a variety of GE gas ranges. It is designed to replace the small burner on the range and is made of durable metal construction. The burner has a total of four ports, two for the flame and two for the air intake. The ports are desig...

The GE Burner XL V2 (Part# WB16X24722) is a replacement burner for select GE gas ranges. It is designed to replace the original burner on the range and features a durable construction that is built to last. The burner has an adjustable flame control knob that allows you to adjust the flame size fo...

GE CKT SCREW - Part# WB01X24735 is a genuine OEM (Original Equipment Manufacturer) replacement part for General Electric brand appliances. It is a screw used to secure the circuit board to the frame of the appliance. This part is made of metal and is approximately 1/2 inch in length. It has a Phil...

The GE Clip Igniter V2 (Part# WB02X24976) is a replacement part for gas ovens and ranges. It is a clip-on igniter that clips onto the burner valve stem and ignites the gas when the oven or range is turned on. The Clip Igniter V2 has a ceramic-insulated wire with a nickel-plated steel clip that att...

GE CLIP RANGETOP - Part# WB02X26569 is a replacement part for GE range tops. It is a metal clip that attaches to the back of the range top and holds it in place. The clip is made of stainless steel and has two holes for screws to secure it to the range top. This part is used on all GE ranges, incl...

GE Control Oven To9 - Part# WB27X29139 is a replacement oven control board for General Electric ovens. It is designed to replace the original control board in select GE ovens and ranges. This control board is responsible for controlling the temperature, timer, and other functions of the oven. It f...

GE Crystal Window is a part number WB56X23809, which is a window assembly for GE brand refrigerators. This window assembly includes the frame, glass, and seal that are used to create the window in the refrigerator door. The frame is made of plastic and the glass is tempered for safety. The seal he...

The GE Frame Front Bumper (Part# WB02X28738) is a replacement part for select GE dishwashers. It is made of durable plastic and is designed to fit the front of the dishwasher frame. The bumper helps protect the dishwasher from damage caused by accidental bumps or scrapes. It also helps keep the di...

GE GLASS OVEN DOOR (DROPSHIP) - Part# WB56X25503 is a replacement part for GE ovens. It is a glass door that fits onto the front of the oven and is designed to keep heat inside the oven while allowing you to see what's cooking. The door is made of tempered glass, which is stronger and more durable...

GE Grate Asm - Part# WB31X26620 is a replacement part for GE gas ranges. It is a grate assembly that includes two grates and four mounting screws. The grates are made of cast iron and have a black finish. The grates are designed to fit over the burners on the range, providing even heat distributio...

The GE Igniter Glowbar (Part# WB13X25261) is a replacement part for a gas oven. It is an electrical component that ignites the gas in the oven when it is turned on. The glowbar is made of a metal alloy that glows red hot when electricity passes through it, creating enough heat to ignite the gas. T...

The GE Ignition Module Part# WB13X24323 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic component that controls the ignition of the oven’s gas burners. The module works by sending an electrical signal to the spark igniter, which then ignites the gas. The module ...

GE KNOB ASM - Part# WB03X24759 is a replacement part for a range or oven. It is a knob assembly that includes the knob, the shaft, and the clip. The knob is used to control the temperature of the oven or range. The clip attaches the knob to the shaft and holds it in place. This part is made of pla...

The GE LF Orifice Holder - Part# WB28X24764 is a replacement part for a gas range. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two small screws that are used to secure it in place. The orif...

GE Manifold Tube Supply - Part# WB28X24772 is a replacement part for GE refrigerators. It is a tube that supplies water to the refrigerator's ice maker and water dispenser. The tube is made of plastic and measures approximately 4 feet in length. It has two fittings on either end, one for the water...

The GE Medium Burner - Part# WB16X24724 is a replacement part for a variety of GE and Hotpoint gas ranges. This medium burner is designed to provide an even heat distribution across the cooking surface. It features a durable porcelain-enameled steel construction and includes the mounting hardware ...

The GE Orifice Holder - Part# WB28X26621 is a replacement part for gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas line and the burner. The orifice holder is made of metal and has two screws that secure it to the range. It also has a small hole i...

The GE Orifice Holder LR - Part# WB28X24766 is a replacement part for a gas range. It is used to hold the orifice in place and is made of metal. The orifice holder is located inside the burner assembly and helps to regulate the flow of gas to the burner. This part fits specific General Electric ma...

The GE Orifice Holder RR Part# WB28X24763 is a replacement part for GE gas ranges. It is used to hold the orifice in place and provide a secure connection between the gas valve and the burner. The orifice holder is made of metal and has two screws that secure it to the gas valve. It also has a sma...

The GE Orifice Spud - Part# WB28X26625 is a replacement part for gas ranges and cooktops. It is used to regulate the flow of gas from the main gas line to the burner. The orifice spud is a small metal disc with a hole in the center that fits into the burner head. The size of the hole determines ho...

The GE Oven Orifice Spud is a part used in gas ovens to regulate the flow of gas. It is a metal spud with a threaded end that screws into the gas valve. The orifice spud has a hole in the center that allows the gas to flow through it and into the oven. The size of the hole determines how much gas ...

The GE Range Broil Burner Part# WB16K10086 is a replacement part for a range or oven. It is a burner that is used to broil food in the oven. The burner has two settings, high and low, and can be adjusted to provide the desired level of heat. The burner is made of stainless steel and has a black fi...

The GE RF Burner Jet with Electrode (Part# WB02X24727) is a replacement part for GE gas ranges. It is a burner jet that uses radio frequency (RF) energy to ignite the gas. The RF burner jet has an electrode that is used to detect the presence of a flame and shut off the gas if the flame goes out. ...

GE TRIM DOOR - Part# WB07X25502 is a replacement part for GE ovens. It is a trim door that fits around the oven door and helps to keep the heat in while cooking. The trim door is made of stainless steel and has a black finish. It is designed to fit GE oven models JGBS30DEK2WW, JGBS30DEK3WW, JGBS30...

The GE Valve Burner 270 Part# WB21X20260 is a replacement part for GE gas ranges. It is a single-valve burner that is used to control the flow of gas to the burners on the range. The valve has two ports, one for the gas supply and one for the burner. The valve is designed to be adjustable so that ...

The GE Valve Burner 270 Part# WB21X20262 is a replacement part for GE gas ranges. It is a single-valve burner assembly that includes the valve, knob, and burner head. The valve controls the flow of gas to the burner head, which in turn produces heat for cooking. The knob allows you to adjust the f...

The GE Valve Burner 274 - Part# WB21X20261 is a replacement part for GE gas ranges. It is a gas valve burner assembly that includes the burner, the valve, and the igniter. The valve controls the flow of gas to the burner, while the igniter sparks to ignite the gas. This part is used to replace a f...

GE Vent Trim - Part# WB07X24847 is a replacement part for a range hood. It is designed to fit GE and Hotpoint brand range hoods. The trim is made of plastic and comes in black. It is used to cover the gap between the range hood and the wall, creating a finished look. The trim measures approximatel...

A Hinge Door (Part# WB10X21659) is a type of door that is attached to a frame by two or more hinges. It is typically used in residential and commercial applications, such as interior and exterior doors. The door opens by swinging outward or inward, depending on the type of hinge used. This particu...

Range control bracket - Part# WB02X24845 is a part used in some GE and Hotpoint ovens. It is a metal bracket that attaches to the back of the oven and helps to secure the range control panel in place. The bracket also helps to provide support for the range control panel, which can be easily damage...

The Range Control Panel - Black - Part# WB07X25197 is a replacement part for select GE and Hotpoint ranges. It is a black control panel with a digital display and touchpad controls. The control panel allows you to set the oven temperature, timer, and other settings. It also includes an electronic ...

Range drawer glider Part# WB02X26847 is a replacement part for a range drawer. It is used to help the drawer slide in and out of the range. The glider is made of plastic and has two metal tracks that attach to the sides of the drawer. The glider also has two metal tabs that fit into slots on the b...

Range End Support - Left - B - Part# WB07X24732 is a part used in some General Electric (GE) ovens. It is the left side support for the range end. This part helps to keep the range end in place and provide stability for the oven. It is made of metal and is approximately 8 inches long. The part num...

Range End Support - Right - Part# WB07X24733 is a part used in some GE ranges. It is the right-hand end support for the range, and it helps to keep the range stable and secure. The part is made of metal and is designed to fit a variety of GE ranges. It attaches to the back of the range with screws...

The Range Inject Large Part# WB02X24726 is a replacement part for a range or oven. It is used to inject air into the oven cavity to help regulate the temperature. The part consists of a metal tube with an inlet and outlet port, and a rubber seal at the end of the tube. The inlet port is connected ...

The Range Inject Small - Part# WB02X24728 is a small injector used to deliver a precise amount of fuel to the range burner. It is designed to be used with select GE and Hotpoint ranges. This injector is responsible for providing the correct amount of fuel to the burner, ensuring that it operates a...

The Range Side Manifold Bracket (Part# WB02X24939) is a part used in some GE and Hotpoint range models. It is a metal bracket that attaches to the side of the range and holds the manifold assembly in place. The manifold assembly is responsible for controlling the gas flow to the burners. The brack...