Model: JGB635DEK1WW

The GE Bracket Cook Top - Part# WB37X20193 is a replacement part for a GE range. It is a metal bracket that attaches to the underside of the cooktop and supports the cooktop in place. The bracket is made of durable metal and is designed to fit all GE ranges. It includes two screws for installation...

GE Bracket Drawer Part# WB02X24742 is a replacement part for GE ovens. It is a bracket drawer that attaches to the bottom of the oven and holds the drawer in place. The bracket is made of metal and has two holes for mounting screws. This part is used to replace a worn or damaged bracket drawer on ...

GE Burner Bake Part# WB16X20463 is a replacement part for GE ovens. It is a burner bake element that is used to heat the oven. The element is made of metal and has two terminals at the back that connect to the wiring harness. The element is designed to evenly distribute heat throughout the oven ca...

GE Control Oven To9 (Gas) - Part# WB27K10453 is a replacement part for a gas oven. It is designed to replace the existing control panel on the oven and provide more precise temperature control. The part includes a thermostat, bake igniter, and oven selector switch. The thermostat allows you to set...

The GE Front Orifice Holder (Part# WB28X26604) is a replacement part for GE gas ranges. It is used to hold the orifice in place and provide a secure connection between the burner and the gas supply line. The holder is made of metal and has a threaded end that screws into the burner. It also has a ...

GE GLASS OVEN DOOR (DROPSHIP) - Part# WB56X25570 is a replacement part for GE ovens. It is a glass door that fits onto the front of the oven and provides a clear view of the interior. The door is made from tempered glass, which is designed to be heat-resistant and shatter-resistant. It also featur...

GE GRATE ASM HAIRPIN HV - Part# WB31X20643 is a replacement part for GE gas ranges. It is the hairpin assembly for the high voltage grate on the range. This part is made of metal and includes two hairpins that are used to secure the grate to the range. The part number WB31X20643 is specific to GE ...

GE Handle (Le-Wh) - Part# WB15T10214 is a replacement handle for GE ovens. It is made of durable plastic and comes in a white finish. The handle measures 8 inches long and has two mounting holes for easy installation. This handle is designed to fit most GE oven models, including the JB750, JB850, ...

The GE Ignition Module Part# WB13X24323 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic component that controls the ignition of the oven’s gas burners. The module works by sending an electrical signal to the spark igniter, which then ignites the gas. The module ...

The GE L Front Orifice Holder - Part# WB28X26306 is a replacement part for a gas range. It is used to hold the orifice in place and is located at the front of the range. The orifice holder is made of metal and has two screws that secure it to the range. This part is compatible with several GE gas ...

The GE Oven Orifice Spud is a part used in gas ovens to regulate the flow of gas. It is a metal spud with a threaded end that screws into the gas valve. The orifice spud has a hole in the center that allows the gas to flow through it and into the oven. The size of the hole determines how much gas ...

The GE Range Broil Burner Part# WB16K10086 is a replacement part for a range or oven. It is a burner that is used to broil food in the oven. The burner has two settings, high and low, and can be adjusted to provide the desired level of heat. The burner is made of stainless steel and has a black fi...

GE Range Top - Part# WB62X26314 is a replacement part for a GE range top. It is a black, porcelain-coated steel top that fits on the range and provides a cooking surface. The part includes two 6-inch and two 8-inch burners, as well as an 8-inch center oval burner. It also includes the necessary ha...

The GE Round Valve Burner 140 (Part# WB21K10169) is a replacement part for GE gas ranges. It is a round valve burner that has a 140 BTU rating and is designed to fit into a range top. The burner has an adjustable air shutter and is made of durable stainless steel. It also features an easy-to-clean...

The GE Round Valve Burner 140 - Part# WB21K10170 is a replacement part for a gas range. It is designed to replace the round valve burner on a GE gas range. This part is made of durable metal and features a round shape with four mounting holes. The burner has an output of 140 BTU/hr and is designed...

GE TRIM CONTROL - Part# WB07X20341 is a replacement part for GE microwave ovens. It is a trim control knob that is used to adjust the cooking time and power level of the oven. The trim control knob has a black plastic body with a white plastic insert and a silver metal shaft. The trim control knob...

GE TRIM DOOR - Part# WB07X24881 is a replacement part for GE microwaves. It is a plastic trim door that fits around the microwave door and helps to keep the door closed and secure. The trim door also helps to reduce noise from the microwave when it is in use. The trim door is made of durable plast...

GE Vent Trim - Part# WB07X24882 is a part used in GE range hoods. It is a trim piece that is used to cover the gap between the vent and the wall. It is made of stainless steel and has a brushed finish. The trim piece measures 8-1/2" x 2-3/4" and has two mounting holes for easy installation. This p...

A Hinge Door (Part# WB10X21659) is a type of door that is attached to a frame by two or more hinges. It is typically used in residential and commercial applications, such as interior and exterior doors. The door opens by swinging outward or inward, depending on the type of hinge used. This particu...

Range back end support, Part# WB07X20278, is a part used to support the back of a range. It is typically used to secure the range to the wall and provide additional stability. The part is made of metal and is designed to fit most standard ranges. It includes two mounting screws and two nuts for in...

Range drawer glider Part# WB02X26847 is a replacement part for a range drawer. It is used to help the drawer slide in and out of the range. The glider is made of plastic and has two metal tracks that attach to the sides of the drawer. The glider also has two metal tabs that fit into slots on the b...

Range End Support - Right - Part# WB07X20277 is a part used in many GE and Hotpoint ranges. It is the right-hand side support for the range end. This part helps to support the range end and keep it from sagging or shifting. It also helps to keep the range level and stable. The part is made of meta...