Model: JGB630DEF2CC

The GE Bracket Cook Top - Part# WB37X20193 is a replacement part for a GE range. It is a metal bracket that attaches to the underside of the cooktop and supports the cooktop in place. The bracket is made of durable metal and is designed to fit all GE ranges. It includes two screws for installation...

GE Burner Bake Part# WB16X20463 is a replacement part for GE ovens. It is a burner bake element that is used to heat the oven. The element is made of metal and has two terminals at the back that connect to the wiring harness. The element is designed to evenly distribute heat throughout the oven ca...

GE Control Oven To9 (Gas) - Part# WB27K10453 is a replacement part for a gas oven. It is designed to replace the existing control panel on the oven and provide more precise temperature control. The part includes a thermostat, bake igniter, and oven selector switch. The thermostat allows you to set...

GE ELECTRODES & HARNESS HV - Part# WB18K10098 is a high voltage electrode and harness assembly manufactured by General Electric. It is designed for use in electric ranges and ovens. The assembly includes two electrodes, one positive and one negative, as well as a high voltage harness that connects...

GE GRATE ASSEMBLY - Part# WB31X20527 is a replacement part for GE gas ranges. It is a genuine OEM (Original Equipment Manufacturer) part and is designed to fit various GE gas range models. The grate assembly includes two grates, which are made of cast iron and feature a matte black finish. The gra...

The GE Ignition Module Part# WB13X24323 is a replacement part for a variety of GE gas ovens and ranges. It is an electronic component that controls the ignition of the oven’s gas burners. The module works by sending an electrical signal to the spark igniter, which then ignites the gas. The module ...

GE KNOB VALVE ASM - Part# WB03X20318 is a replacement part for GE gas ranges. It is a valve assembly that includes the knob, stem, and valve body. The knob is used to control the flow of gas to the burners on the range. The stem connects the knob to the valve body, which controls the flow of gas. ...

GE Liner Asm Weld Door - Part# WB56X20537 is a replacement part for GE refrigerators. It is the liner assembly weld door that fits inside the refrigerator cabinet. This part helps to keep the cold air in and warm air out, helping to maintain a consistent temperature inside the refrigerator. The pa...

The GE Oven Orifice Spud is a part used in gas ovens to regulate the flow of gas. It is a metal spud with a threaded end that screws into the gas valve. The orifice spud has a hole in the center that allows the gas to flow through it and into the oven. The size of the hole determines how much gas ...

The GE Range Broil Burner Part# WB16K10086 is a replacement part for a range or oven. It is a burner that is used to broil food in the oven. The burner has two settings, high and low, and can be adjusted to provide the desired level of heat. The burner is made of stainless steel and has a black fi...

GE SCREW - Part# WB01X24460 is a replacement part for General Electric (GE) appliances. It is a small, self-tapping screw used to secure the door handle to the door of the appliance. The screw is made of metal and has a Phillips head. It measures approximately 1/2 inch in length and has a thread d...

GE VALVE CONTROL ASM - Part# WB21X20293 is a replacement part for GE brand washing machines. It is a valve control assembly that controls the water flow into the washer. The valve control assembly includes a water inlet valve, a pressure switch, and a temperature switch. The water inlet valve cont...

A Hinge Door (Part# WB10X21659) is a type of door that is attached to a frame by two or more hinges. It is typically used in residential and commercial applications, such as interior and exterior doors. The door opens by swinging outward or inward, depending on the type of hinge used. This particu...

Range End Support - Left - W - Part# WB07X20270 is a part used in some General Electric (GE) ranges. It is the left end support for the range and is made of white plastic. This part helps to support the range and keep it level. It also helps to prevent the range from shifting or moving when in use...

Range End Support - Right - Part# WB07X20269 is a part used in some GE and Hotpoint ovens. It is the right side support for the range end. This part helps to keep the range end in place and secure. It is made of metal and has a black finish. The part number for this item is WB07X20269. This part s...