Model: JGB620DEF2WW

The GE Bracket Cook Top - Part# WB37X20193 is a replacement part for a GE range. It is a metal bracket that attaches to the underside of the cooktop and supports the cooktop in place. The bracket is made of durable metal and is designed to fit all GE ranges. It includes two screws for installation...

GE Burner Bake Part# WB16X20463 is a replacement part for GE ovens. It is a burner bake element that is used to heat the oven. The element is made of metal and has two terminals at the back that connect to the wiring harness. The element is designed to evenly distribute heat throughout the oven ca...

GE Control Oven To9 (Gas) - Part# WB27K10453 is a replacement part for a gas oven. It is designed to replace the existing control panel on the oven and provide more precise temperature control. The part includes a thermostat, bake igniter, and oven selector switch. The thermostat allows you to set...

GE ELECTRODES & HARNESS HV - Part# WB18K10098 is a high voltage electrode and harness assembly manufactured by General Electric. It is designed for use in electric ranges and ovens. The assembly includes two electrodes, one positive and one negative, as well as a high voltage harness that connects...

GE GRATE ASM HAIRPIN HV - Part# WB31X20643 is a replacement part for GE gas ranges. It is the hairpin assembly for the high voltage grate on the range. This part is made of metal and includes two hairpins that are used to secure the grate to the range. The part number WB31X20643 is specific to GE ...

GE Handle (Le-Wh) - Part# WB15T10214 is a replacement handle for GE ovens. It is made of durable plastic and comes in a white finish. The handle measures 8 inches long and has two mounting holes for easy installation. This handle is designed to fit most GE oven models, including the JB750, JB850, ...

The GE KNOB VALVE ASM - Part# WB03X20284 is a replacement part for a range of General Electric (GE) ovens. It is a knob valve assembly that is used to control the flow of gas in the oven. The knob valve assembly includes the knob, the valve stem, and the valve body. The knob is used to turn the ga...

GE Liner Asm Weld Door - Part# WB56X20537 is a replacement part for GE refrigerators. It is the liner assembly weld door that fits inside the refrigerator cabinet. This part helps to keep the cold air in and warm air out, helping to maintain a consistent temperature inside the refrigerator. The pa...

The GE Oven Orifice Spud is a part used in gas ovens to regulate the flow of gas. It is a metal spud with a threaded end that screws into the gas valve. The orifice spud has a hole in the center that allows the gas to flow through it and into the oven. The size of the hole determines how much gas ...

The GE Range Broil Burner Part# WB16K10086 is a replacement part for a range or oven. It is a burner that is used to broil food in the oven. The burner has two settings, high and low, and can be adjusted to provide the desired level of heat. The burner is made of stainless steel and has a black fi...

GE Range Top S.B. - Part# WB62X20276 is a replacement part for a GE range top. It is a stainless steel burner bowl that fits over the burner on the range top. The bowl helps to protect the burner from spills and splatters, and also helps to keep the heat evenly distributed across the surface of th...

GE SCREW - Part# WB01X24460 is a replacement part for General Electric (GE) appliances. It is a small, self-tapping screw used to secure the door handle to the door of the appliance. The screw is made of metal and has a Phillips head. It measures approximately 1/2 inch in length and has a thread d...

GE TRIM CONTROL - Part# WB07X20341 is a replacement part for GE microwave ovens. It is a trim control knob that is used to adjust the cooking time and power level of the oven. The trim control knob has a black plastic body with a white plastic insert and a silver metal shaft. The trim control knob...

GE VALVE CONTROL ASM - Part# WB21X20293 is a replacement part for GE brand washing machines. It is a valve control assembly that controls the water flow into the washer. The valve control assembly includes a water inlet valve, a pressure switch, and a temperature switch. The water inlet valve cont...

A Hinge Door (Part# WB10X21659) is a type of door that is attached to a frame by two or more hinges. It is typically used in residential and commercial applications, such as interior and exterior doors. The door opens by swinging outward or inward, depending on the type of hinge used. This particu...

Range back end support, Part# WB07X20278, is a part used to support the back of a range. It is typically used to secure the range to the wall and provide additional stability. The part is made of metal and is designed to fit most standard ranges. It includes two mounting screws and two nuts for in...

Range End Support - Right - Part# WB07X20277 is a part used in many GE and Hotpoint ranges. It is the right-hand side support for the range end. This part helps to support the range end and keep it from sagging or shifting. It also helps to keep the range level and stable. The part is made of meta...