Model: JGB450DEF3BB

The Burner Large V2 - Part# WB16X24723 is a replacement part for a range or oven. It is a large burner that is used to provide heat to the cooking surface. The burner has two parts: the burner head and the burner base. The burner head is made of stainless steel and has a large diameter of 8 inches...

GE Bracket Control Part# WB02K10150 is a part used in many GE ovens and ranges. It is a bracket that holds the oven door in place and helps to keep it from swinging open. The bracket is made of metal and has two holes for mounting screws. It also has two slots for the oven door handle to fit into....

GE BUMPER - Part# WB02X24790 is a replacement part for GE range and ovens. It is a black plastic bumper that is used to protect the range or oven from damage when it is opened and closed. The bumper fits around the edge of the range or oven door and helps to reduce noise when the door is opened an...

GE Burner Bake Part# WB16X20463 is a replacement part for GE ovens. It is a burner bake element that is used to heat the oven. The element is made of metal and has two terminals at the back that connect to the wiring harness. The element is designed to evenly distribute heat throughout the oven ca...

The GE Burner Small V2 - Part# WB16X24721 is a replacement part for a variety of GE gas ranges. It is designed to replace the small burner on the range and is made of durable metal construction. The burner has a total of four ports, two for the flame and two for the air intake. The ports are desig...

GE CKT SCREW - Part# WB01X24735 is a genuine OEM (Original Equipment Manufacturer) replacement part for General Electric brand appliances. It is a screw used to secure the circuit board to the frame of the appliance. This part is made of metal and is approximately 1/2 inch in length. It has a Phil...

The GE Clip Igniter V2 (Part# WB02X24976) is a replacement part for gas ovens and ranges. It is a clip-on igniter that clips onto the burner valve stem and ignites the gas when the oven or range is turned on. The Clip Igniter V2 has a ceramic-insulated wire with a nickel-plated steel clip that att...

GE GLASS OVEN DOOR (DROPSHIP) - Part# WB56X25503 is a replacement part for GE ovens. It is a glass door that fits onto the front of the oven and is designed to keep heat inside the oven while allowing you to see what's cooking. The door is made of tempered glass, which is stronger and more durable...

GE GRATE ASM HAIRPIN HV - Part# WB31X20643 is a replacement part for GE gas ranges. It is the hairpin assembly for the high voltage grate on the range. This part is made of metal and includes two hairpins that are used to secure the grate to the range. The part number WB31X20643 is specific to GE ...

The GE L Front Orifice Holder - Part# WB28X26306 is a replacement part for a gas range. It is used to hold the orifice in place and is located at the front of the range. The orifice holder is made of metal and has two screws that secure it to the range. This part is compatible with several GE gas ...

The GE Medium Burner - Part# WB16X24724 is a replacement part for a variety of GE and Hotpoint gas ranges. This medium burner is designed to provide an even heat distribution across the cooking surface. It features a durable porcelain-enameled steel construction and includes the mounting hardware ...

GE Orifice Spud Part# WB28K10834 is a replacement part for GE gas ranges. It is an orifice spud, which is a metal tube that connects the gas burner to the gas supply line. The orifice spud controls the flow of gas to the burner and helps regulate the flame size. This part is made of metal and has ...

The GE Oven Orifice Spud is a part used in gas ovens to regulate the flow of gas. It is a metal spud with a threaded end that screws into the gas valve. The orifice spud has a hole in the center that allows the gas to flow through it and into the oven. The size of the hole determines how much gas ...

GE Oven Rack Part# WB48X20249 is a replacement oven rack for GE ovens. It is made of heavy-duty steel and is designed to fit perfectly in all GE ovens. The rack measures 24" wide by 16" deep and has two handles on either side for easy removal. It also features a non-stick coating to help prevent f...

The GE Range Broil Burner Part# WB16K10086 is a replacement part for a range or oven. It is a burner that is used to broil food in the oven. The burner has two settings, high and low, and can be adjusted to provide the desired level of heat. The burner is made of stainless steel and has a black fi...

The GE RF Burner Jet with Electrode (Part# WB02X24727) is a replacement part for GE gas ranges. It is a burner jet that uses radio frequency (RF) energy to ignite the gas. The RF burner jet has an electrode that is used to detect the presence of a flame and shut off the gas if the flame goes out. ...

GE Support Base - Part# WB63X20216 is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications. It is a support base for a range of GE appliances, including microwaves, ovens, and cooktops. The support base is made of durable metal and is designed to pro...

GE THERMOSTAT SCG - Part# WB20K10021 is a digital thermostat designed to control the temperature of a home or office. It is a programmable thermostat that allows users to set their desired temperature and have it maintained automatically. The thermostat features an easy-to-read LCD display, adjust...

GE TRIM DOOR - Part# WB07X20354 is a replacement part for GE microwaves. It is a trim door that fits over the microwave door to give it a finished look. The trim door is made of stainless steel and has a brushed finish. It measures approximately 20-3/4 inches wide by 4-1/2 inches high and has two ...

GE VALVE CONTROL ASM - Part# WB21X20293 is a replacement part for GE brand washing machines. It is a valve control assembly that controls the water flow into the washer. The valve control assembly includes a water inlet valve, a pressure switch, and a temperature switch. The water inlet valve cont...

GE Vent Trim - Part# WB07X24847 is a replacement part for a range hood. It is designed to fit GE and Hotpoint brand range hoods. The trim is made of plastic and comes in black. It is used to cover the gap between the range hood and the wall, creating a finished look. The trim measures approximatel...

A Hinge Door (Part# WB10X21659) is a type of door that is attached to a frame by two or more hinges. It is typically used in residential and commercial applications, such as interior and exterior doors. The door opens by swinging outward or inward, depending on the type of hinge used. This particu...

Range End Support - Left (Part# WB07X20197) is a part used in many General Electric and Hotpoint ovens. It is the left side support for the range end. This part is made of metal and is used to hold up the range end of the oven. It attaches to the back wall of the oven and helps to keep the range e...

Range End Support - Right is a part used in many ranges and ovens. It is a metal bracket that attaches to the right side of the range or oven and supports the end of the cooktop. The part number for this part is WB07X20194. This part is made of metal and has two mounting holes for attaching it to ...

The Range Inject Large Part# WB02X24726 is a replacement part for a range or oven. It is used to inject air into the oven cavity to help regulate the temperature. The part consists of a metal tube with an inlet and outlet port, and a rubber seal at the end of the tube. The inlet port is connected ...

The Range Inject Small - Part# WB02X24728 is a small injector used to deliver a precise amount of fuel to the range burner. It is designed to be used with select GE and Hotpoint ranges. This injector is responsible for providing the correct amount of fuel to the burner, ensuring that it operates a...

The Range Knob Black Part# WB03X23503 is a replacement part for a range or stove. It is used to control the heat settings on the range or stove. The knob is black in color and has a metal shaft that fits into the range or stove. It has a white indicator line that can be used to indicate the temper...

The Receiver Hinge, Part# WB10X20220, is a part used in many GE and Hotpoint ovens. It is a metal hinge that connects the oven door to the oven frame. The hinge is designed to provide a secure connection between the two parts while allowing for smooth and easy opening and closing of the door. The ...