Model: JF42NXFXDE00

Whirlpool CNTRL-ELEC+CORE (REFRIG) - Part# WPW10739408 is a refrigerator control board and core assembly. It is used to control the temperature, defrost cycle, and other functions of the refrigerator. The control board and core assembly includes a main control board, a temperature sensor, a defros...

Whirlpool CNTRL-ELEC+CORE(REFRIG) - Part# WPW10624574 is a refrigerator control board and core assembly. It is used to control the temperature, defrost cycle, and other functions of the refrigerator. The control board contains a microprocessor that monitors and controls the various components of t...

The Whirlpool EVAPORATOR - Part# W10552972 is a replacement evaporator for Whirlpool refrigerators. It is designed to replace the original evaporator in Whirlpool refrigerators and freezers. The evaporator is responsible for cooling the air inside the refrigerator and freezer by absorbing heat fro...

The Whirlpool Grille-Frt - Part# WPW10188549 is a replacement part for a range or oven. It is a metal grille that fits over the front of the range or oven and provides protection from heat and debris. The grille is made of stainless steel and has a brushed finish. It measures approximately 20 inch...

The Whirlpool Heater - Part# W10524056 is a high-efficiency, electric water heater designed to provide hot water for residential and commercial applications. This model features a durable stainless steel tank with a capacity of 50 gallons. It is equipped with an adjustable thermostat and two heati...

Whirlpool Housing Part# W10538315 is a replacement part for Whirlpool washing machines. It is a plastic housing that covers the motor and other components of the washing machine. The housing helps to protect the internal components from dust, dirt, and other debris. It also helps to reduce noise f...

Whirlpool Insulation - Part# W10555478 is a type of insulation specifically designed for use in Whirlpool refrigerators. It is made from a combination of polyurethane foam and fiberglass, and is designed to provide superior insulation and sound dampening properties. The insulation helps to keep th...

The Whirlpool Invrtr-Box Part# W10721030 is a power inverter box designed to convert AC power from a standard wall outlet into DC power. This allows you to use DC powered devices such as laptops, cell phones, and other electronics in places where AC power is not available. The inverter box has two...

Whirlpool Rail-Mulln Part# W10732104 is a replacement part for Whirlpool dishwashers. It is a plastic rail that helps to keep the dishwasher racks in place and prevents them from sliding around during the wash cycle. The rail is made of durable plastic and features a black finish. It measures appr...

The Whirlpool Ring Part# W10782424 is a replacement part for Whirlpool washing machines. It is a rubber ring that fits around the outer edge of the washer tub and helps to keep water from leaking out of the washer. The ring also helps to reduce vibration and noise during the wash cycle. This part ...

The Whirlpool Slide - Part# 2306116 is a replacement part for Whirlpool refrigerators. It is a slide that helps to support the refrigerator door and keep it in place. The slide is made of durable plastic and measures approximately 4 inches long by 1 inch wide. It has two mounting holes on either s...

Whirlpool Solenoid Part# WPW10364560 is a replacement part for Whirlpool washing machines. It is a two-terminal solenoid that helps to control the water flow in the washing machine. The solenoid is located on the back of the washer and is connected to the water inlet valve. When activated, it open...

Whirlpool Support - Part# W10605575 is a support bracket designed to provide additional stability for Whirlpool refrigerators. The bracket is made of durable steel and is designed to fit most Whirlpool refrigerator models. It helps to reduce vibration and noise, as well as prevent the refrigerator...

Whirlpool SWITCH - Part# W10565413 is a replacement part for Whirlpool dishwashers. It is a push-to-start switch that is used to start the dishwasher cycle. The switch is made of plastic and has two terminals. It has a black knob on the top that can be pushed in to start the cycle. The switch also...

Whirlpool TRIM-CABNT - Part# W10605547 is a trim kit for Whirlpool microwaves. It is designed to provide a finished look to the installation of a Whirlpool microwave. The kit includes two side panels, one top panel, and one bottom panel. The side panels are made of stainless steel and have a brush...

The Whirlpool Tube - Part# W10528578 is a replacement part for Whirlpool washing machines. It is a plastic tube that connects the water inlet valve to the water level switch. The tube helps regulate the amount of water entering the washer and allows the washer to fill with the correct amount of wa...

Whirlpool TUBE-WATER - Part# 2317847 is a replacement part for Whirlpool washing machines. It is a flexible plastic tube that connects the water inlet valve to the water pump. The tube is designed to allow water to flow from the inlet valve to the pump, and then back out of the pump and into the w...

The Whirlpool VALVE - Part# W10545670 is a replacement part for a variety of Whirlpool washing machines. It is a water inlet valve that controls the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open and cl...

The Whirlpool Valve - Part# W11291510 is a water valve used in many Whirlpool washing machines. It is a two-way valve that controls the flow of water into and out of the washing machine. The valve has two ports, one for the cold water supply and one for the hot water supply. The valve also has a t...

The Whirlpool VALVE-INLT - Part# W10574769 is a replacement part for a variety of Whirlpool washing machines. It is a water inlet valve that controls the flow of water into the washing machine. The valve has two ports, one for hot water and one for cold water. It also has two solenoids that open a...

Whirlpool WIRE-JUMPR Part# W10568445 is a wire harness that is used to connect two different types of appliances together. It is designed to be used with Whirlpool and Maytag appliances, and it is used to connect the power supply of one appliance to the other. The Wire-Jumper is a two-wire harness...