Model: JCTP70SP2SS

Badge GE Part# WB02T10359 is a badge reader designed to be used with GE Security systems. It is a two-part system consisting of a reader and a badge. The reader is installed on the wall or door frame and reads the encoded information on the badge when it is presented to it. The badge contains enco...

The GE Bake Element - Part# WB44T10110 is a replacement part for electric ovens. It is a bake element that is used to heat the oven cavity. The element is made of metal and has two terminals at the end. It is designed to fit specific General Electric manufactured oven models. This bake element mea...

The GE Bracket Capacitor MTR Part# WB02T10152 is a capacitor motor run start capacitor designed to help start and run electric motors. It is a dual-run capacitor with two capacitors in one housing. The first capacitor is used to start the motor, while the second capacitor helps the motor run more ...

GE Divider Air (BK) is a part manufactured by General Electric (GE). It is a replacement part for GE ovens and ranges. The part number is WB02T10421. This part is used to separate the oven cavity from the broiler compartment. It helps to keep the heat from the broiler away from the oven cavity, al...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop Appliance Lamp Assembly - 40W 120V Bulb - Part# WB08T10002 is a replacement part for many GE, Hotpoint, PartsIPS, and Kenmore stoves, ranges, ovens, cooktops and other appliances. This lamp assembly includes a 40 watt 120 v...

GE LATCH AND TAPE ASM - Part# WB14T10082 is a replacement part for GE ovens. It is a latch and tape assembly that is used to secure the oven door in place. The latch and tape assembly consists of two parts: the latch and the tape. The latch is a metal piece that attaches to the oven door and locks...

GE Limit Switch Part# WB24T10060 is a safety device used to control the operation of an appliance or other electrical device. It is designed to shut off power to the appliance or device when it reaches a certain temperature. The switch is typically mounted on the back of the appliance and has two ...

GE Motor PSC Conv - Part# WB26T10043 is a motor and fan assembly for a range hood. It is designed to replace the existing motor and fan assembly in many GE, Hotpoint, and Kenmore range hoods. The motor is a permanent split capacitor (PSC) type, which means it has two windings that are permanently ...

The GE Oven Bulb Lens - Part# WB25T10002 is a replacement part for a range of GE ovens. It is a glass lens that covers the light bulb in the oven, protecting it from heat and moisture. The lens also helps to diffuse the light from the bulb, making it easier to see inside the oven. The lens is made...

GE Rack Oven - Part# WB48T10050 is a commercial-grade oven designed for baking and roasting. It features a large capacity interior with adjustable racks that can accommodate up to four full-size sheet pans. The oven also has an electronic control panel with a digital display for easy operation and...

GE Retainer Insulation Oven Door (Part# WB02T10371) is a replacement part for GE ovens. It is a plastic retainer that holds the insulation in place on the oven door. The insulation helps to keep heat inside the oven and prevents it from escaping. This part is made of durable plastic and is designe...

GE RETAINER INSLN SDE - Part# WB02T10284 is a part manufactured by General Electric (GE). It is a retainer insulation side for use in various GE ovens. This part is made of plastic and is used to secure the insulation on the side of the oven. It helps to keep the heat inside the oven and prevent i...

GE SCR 8-18X.450 AB FLT20 S - Part# WB01T10110 is a part manufactured by General Electric (GE). It is a self-closing range (SCR) part that is designed to fit ranges with an 8-18 inch opening and a .450 inch depth. The part is made of stainless steel and has a flat top design (FLT20 S). This part n...

GE Sensor ASM - Part# WB21T10018 is a replacement part for GE ovens. It is a temperature sensor assembly that helps to regulate the temperature inside the oven. The sensor monitors the air temperature inside the oven and sends a signal to the electronic control board to adjust the heating elements...

GE SPACER DOOR HDL - Part# WB02T10524 is a part used in many GE ovens. It is a metal handle that attaches to the oven door and helps to keep the door in place when it is closed. The handle also helps to provide a secure grip when opening and closing the oven door. This part is made of durable meta...

GE STUD COMPOSITE - Part# WB02T10453 is a composite part used in many GE appliances. It is a metal stud that is used to secure the door of the appliance to the frame. The stud is made of a combination of steel and plastic, which makes it strong and durable. It has two holes at each end for mountin...

GE SUPPORT CNTL TRM - Part# WB02T10376 is a control terminal manufactured by General Electric (GE). It is used to control the operation of a variety of appliances, such as refrigerators, ovens, dishwashers, and washers and dryers. The terminal has two parts: a base unit and a terminal board. The b...

GE SWITCH HIGH LMT OV BACK - Part# WB24T10081 is a high limit thermostat switch manufactured by General Electric. This switch is used to control the temperature of an oven or range. It is designed to shut off the power to the heating element when the temperature reaches a certain level, preventing...

GE Switch Limit Bimetal Part# WB24T10118 is a bimetallic switch limit that is used to control the temperature of an appliance. It is designed to open and close a circuit when the temperature reaches a certain level. The switch has two metal strips that are joined together and when heated, they exp...

GE Unit Broil Asm - Part# WB44T10106 is a replacement part for General Electric ovens. It is the broil unit assembly, which includes the heating element, insulation, and mounting bracket. The part number WB44T10106 is used to identify the specific model of the broil unit assembly. This part is use...

GE WRAPPER OVN CAV ASM - Part# WB63T10129 is a replacement part for a GE oven. It is the outer wrap that covers the oven cavity and helps to keep the heat inside the oven. This part is made of stainless steel and is designed to fit specific GE models. It includes mounting screws and instructions f...

HINGE DOOR LT - Part# WB10T10124 is a part of the Whirlpool brand of kitchen appliances. It is a replacement part for the lower hinge door on Whirlpool ovens. This part is made of durable metal and plastic and is designed to fit most Whirlpool ovens. It includes two screws for installation and can...

HINGE DOOR RT - Part# WB10T10123 is a replacement part for a refrigerator door hinge. It is designed to fit specific models of GE, Hotpoint, and RCA refrigerators. The part is made of durable plastic and metal components and includes two mounting screws. It is designed to replace the existing hing...