Model: JC2225GEKB13

The Maytag EVAP KIT (SXS) - Part# 12001940 is a replacement part for Maytag refrigerators. It is an evaporator kit that includes the evaporator, fan motor, and mounting hardware. The evaporator is designed to remove moisture from the air inside the refrigerator, helping to keep food fresh and prev...

Maytag GLIDE, FRZ (LT) - Part# 67005375 is a replacement part for Maytag refrigerators. It is a freezer glide rail that helps to keep the freezer door in place and allows it to open and close smoothly. The part number 67005375 is specific to Maytag refrigerators and is used to replace the original...

Maytag Insulation, Chute Door - Part# 67007098 is a replacement part for Maytag washing machines. It is made of high-quality insulation material and is designed to fit the chute door of the machine. The insulation helps to keep the machine running efficiently by preventing heat loss and reducing n...

The Maytag SCREW, ADJUSTING (ROD) - Part# 67006697 is a replacement part for Maytag washing machines. It is a metal rod with a threaded end that is used to adjust the tension of the agitator in the washing machine. The rod is inserted into the agitator and then tightened or loosened to adjust the ...

The Maytag SHIM, CLOSURE (BLK) - Part# 67005716 is a part used in Maytag washing machines. It is a black plastic shim that is used to secure the closure of the washing machine door. The shim helps to ensure that the door is properly sealed and does not leak water or steam during operation. The par...

Whirlpool ARM-SHUT Part# WPW10152975 is a replacement part for Whirlpool dishwashers. It is a shut off arm that helps to control the water flow in the dishwasher. The arm is connected to the float switch, which senses when the water level has reached a certain point and shuts off the water supply....

The Whirlpool Bucket-IC Part# WP67005959 is a part used in Whirlpool washing machines. It is a plastic bucket that holds the agitator and the impeller. The bucket is connected to the agitator shaft and the impeller shaft, which are both connected to the motor. The bucket helps to keep the agitator...

The Whirlpool BULB-LIGH Part# WP67002552 is a replacement light bulb for select Whirlpool and Maytag refrigerators. This light bulb is designed to fit into the refrigerator's interior light socket and provide illumination for the interior of the refrigerator. It is a 25 watt, 120 volt, A15 style b...

Whirlpool CRUSHR-MECH - Part# WP12740302 is a replacement part for Whirlpool dishwashers. It is the crusher mechanism that helps to break down food particles and other debris before they enter the dishwasher’s pump and drain system. The crusher mechanism consists of a plastic housing, a metal blad...

The Whirlpool GASKET-FIP - Part# W10133491 is a replacement part for a variety of Whirlpool and KitchenAid refrigerators. It is a rubber gasket that seals the connection between the refrigerator's water filter housing and the water filter itself. This gasket helps to ensure that no water leaks out...

The Whirlpool GRILLE-FRT - Part# WP67006687 is a replacement part for Whirlpool refrigerators. It is the front grille assembly for the refrigerator, which includes the grille, handle, and mounting screws. The grille is made of plastic and comes in white. It is designed to fit most Whirlpool refrig...

The Whirlpool HINGE-DOOR Part# 12626908ED is a replacement part for a refrigerator door. It is designed to replace the original hinge on the door of a Whirlpool refrigerator. The part is made of durable plastic and metal and features a white finish. It includes two screws for installation and is c...

The Whirlpool SCREW - Part# 67006529 is a replacement part for Whirlpool washing machines. It is a small, metal screw that is used to secure the agitator to the drive shaft of the washer. The screw measures approximately 1/4 inch in diameter and is 1-1/2 inches long. It has a Phillips head and is ...

The Whirlpool Tray-Sump (Part# WP67005636) is a replacement part for Whirlpool dishwashers. It is a plastic tray that sits at the bottom of the dishwasher and collects water and debris from the dishes. The tray has a sump pump that pumps the water out of the dishwasher when it is finished with its...

The Whirlpool Tube-Disc Part# WP12866903 is a replacement part for Whirlpool washing machines. It is a plastic tube with a disc-shaped end that fits into the water inlet valve of the washing machine. The tube-disc helps to regulate the flow of water into the washing machine and helps to prevent ov...

The Whirlpool Wheel-Crs Part# WP67002052 is a replacement wheel for Whirlpool washing machines. It is designed to fit the following models: CAE2745FQ0, CAE2745FQ1, CAE2745FQ2, CAE2745FQ3, CAE2745FQ4, CAE2745FQ5, and CSE2745FQ0. This wheel is made of durable plastic and has a diameter of 3-1/2 inch...