Model: JBS10GF2SA

GE Bracket Asm Anti-Tip - Part# WB02X27862 is a bracket assembly designed to prevent a range from tipping over. It is made of metal and attaches to the rear of the range and the floor. The bracket helps to keep the range in place, even if it is bumped or pushed. It also helps to reduce the risk of...

The GE Bracket Cook Top - Part# WB37X20193 is a replacement part for a GE range. It is a metal bracket that attaches to the underside of the cooktop and supports the cooktop in place. The bracket is made of durable metal and is designed to fit all GE ranges. It includes two screws for installation...

The GE CARTON COVER THERMOSTAT - Part# WB02K10070 is a thermostat designed to be used with GE electric ranges. It is a temperature control device that regulates the temperature of the oven. The thermostat has a dial that can be adjusted to set the desired temperature. The thermostat will then turn...

GE Door Insulation - Part# WB35K10114 is a replacement insulation for GE ovens. It is designed to fit around the door of the oven and help keep heat in and energy costs down. The insulation is made from a high-temperature resistant material that can withstand temperatures up to 500°F. It also help...

GE Frame Weld Asm - Part# WB63X21360 is a frame weld assembly manufactured by General Electric. It is used in various GE appliances such as ovens, ranges, and cooktops. The frame weld assembly consists of a metal frame with two welded brackets that are used to secure the appliance to the wall or c...

GE Insulation Oven Wrap Part# WB35K10108 is a heat-resistant insulation wrap designed to fit around the oven cavity of GE ovens. The wrap helps to keep the oven cavity insulated and prevents heat from escaping, which can help to reduce energy costs. The wrap is made of a non-flammable material and...

The GE Knob Thermostat Assembly (Part# WB03X21367) is a replacement part for many GE ovens. It is a knob and dial assembly that controls the temperature of the oven. The knob is used to adjust the temperature setting, while the dial indicates the current temperature setting. The thermostat assembl...

The GE KNOB VALVE - Part# WB03X21356 is a replacement part for GE range ovens. It is a black plastic knob that controls the temperature of the oven. The knob has a metal stem that fits into the valve stem on the back of the oven. This part is used to control the temperature of the oven and can be ...

GE SCR 8-18 AB X 5/16S - Part# WB01X26995 is a stainless steel screw used in various GE appliances. It is an 8-18 AB x 5/16 inch stainless steel screw with a part number of WB01X26995. This screw is used to secure the control panel to the frame of the appliance. It is made from stainless steel for...

GE SCREW - Part# WB01K10057 is a replacement part for GE appliances. It is a metal screw with a Phillips head and measures approximately 1/4 inch in diameter and 1-1/2 inches in length. The screw is used to secure the top panel of some GE ovens, ranges, and cooktops. It can also be used to secure ...

GE Surface Unit ASM 6 - Part# WB30K10016 is a replacement part for GE electric cooktops. It is a 6-inch surface unit assembly that includes the surface element, the terminal block, and the mounting bracket. The surface element is a coil type with infinite heat settings and is rated at 2,400 watts....

GE Surface Unit Assembly 8" - Part# WB30K10018 is a replacement part for a GE range or cooktop. It is an 8-inch surface unit assembly that includes the burner, burner cap, and terminal block. This part is used to replace a damaged or malfunctioning surface unit on a GE range or cooktop. The termin...

The GE Thermostat Electric Part# WB24X21192 is a thermostat designed to control the temperature of an electric heating system. It is a single-pole, double-throw (SPDT) switch that is used to turn the heating system on and off. The thermostat has two terminals, one for the hot wire and one for the ...

A Hinge Door, Part# WB10X21978, is a type of door that is designed to open and close with the help of two or more hinges. The hinges are typically attached to the door frame and the door itself. This type of door is commonly used in residential and commercial buildings, as well as in other applica...

Range drawer mounting bracket, Part# WB02K10398, is a metal bracket used to mount the range drawer to the range. It is typically located at the bottom of the range and is used to secure the drawer in place. The bracket consists of two pieces: a top piece that attaches to the range and a bottom pie...

Range End Support - Left (Part# WB07X20197) is a part used in many General Electric and Hotpoint ovens. It is the left side support for the range end. This part is made of metal and is used to hold up the range end of the oven. It attaches to the back wall of the oven and helps to keep the range e...

Range End Support - Right is a part used in many ranges and ovens. It is a metal bracket that attaches to the right side of the range or oven and supports the end of the cooktop. The part number for this part is WB07X20194. This part is made of metal and has two mounting holes for attaching it to ...

Range Leveling Leg Part# WB02X29030 is a part used in many different types of ranges and ovens. It is a metal leg that helps to level the range or oven so that it sits evenly on the floor. The leg is adjustable, allowing you to raise or lower it as needed. This part is important for ensuring that ...