Model: JBP15DM2BB

GE Bracket Asm Anti-Tip - Part# WB02K10384 is a safety bracket designed to prevent a range from tipping over. It is made of metal and attaches to the rear of the range, securing it to the wall. The bracket helps to keep the range stable and prevents it from tipping over if someone bumps into it or...

GE Bracket MTG Terminal - Part# WB02K10029 is a mounting bracket for a terminal block. It is designed to provide secure and reliable mounting of the terminal block in an electrical panel. The bracket is made of steel and has a zinc-plated finish for corrosion resistance. It features two mounting h...

GE BUMPER - Part# WB02K10178 is a replacement part for General Electric (GE) range and ovens. It is a black plastic bumper that fits around the oven door to protect it from damage when closing the door. The bumper helps to keep the door from slamming shut and also helps to reduce noise when closin...

GE CLIP RECEPTICAL - Part# WB02K10133 is a replacement part for a range of GE ovens. It is a receptacle clip that holds the receptacle in place on the back of the oven. The clip is made of plastic and has two prongs that fit into the holes in the back of the oven. The clip also has two screws that...

GE Control Surf ELEM Part# WB23K10002 is a replacement surface element for GE electric ranges. It is a genuine OEM part and is designed to provide the same performance as the original part. The element has a 6-inch diameter and features a black finish. It is rated at 240 volts and 2100 watts, and ...

GE Control Surf ELEM - Part# WB23K10003 is a replacement surface element for GE electric ranges. It is a 6-inch, 8-turn, 3000 watt element that fits most GE electric ranges. This part is designed to replace the original element in your range and provide reliable performance. The element has an adj...

GE Drawer Support Part# WB02K10163 is a replacement part for GE ovens. It is a metal support that attaches to the oven drawer and helps to keep it in place. The support is made of durable metal and is designed to fit most GE ovens. It has two mounting holes for easy installation and comes with scr...

GE END SUPPORT LF - Part# WB07K10261 is a part used in GE ovens. It is an end support bracket that is used to secure the oven door to the oven frame. The part is made of metal and has two mounting holes for attaching it to the oven frame. It also has two tabs that fit into slots on the oven door, ...

GE GASKET ASM. DOOR - Part# WB04K10013 is a replacement part for a General Electric (GE) oven door. It is a rubber gasket that fits around the perimeter of the oven door and helps to create an airtight seal when the door is closed. This helps to keep heat and moisture inside the oven, which improv...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Bake Element - Part# WB44K10005 is a replacement part for electric ovens. It is a heating element that is located at the bottom of the oven and is responsible for providing the heat necessary to bake food. The element consists of a metal...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop Appliance Pilot Lamp - Part# WB25K10002 is a replacement part for various models of stoves, ranges, ovens, cooktops and other appliances. This pilot lamp is used to provide a visual indication that the appliance is on and f...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range CookTop 6" BOWL BLACK REAR BUBBLE - Part# WB31T10014 is a replacement part for a range cooktop. It is a 6-inch bowl that is black in color and has a rear bubble. This part is designed to fit certain models of GE, RCA, Hotpoint, PartsIPS, ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range CookTop 8" BOWL BLACK REAR BUBBLE - Part# WB31T10015 is a replacement part for a range cooktop. It is an 8-inch bowl made of black material and has a rear bubble. This part is designed to fit specific models of GE, RCA, Hotpoint, PartsIPS...

GE Glass Oven Door (Part# WB57K10109) is a replacement part for GE ovens. It is a full-length glass door with a stainless steel frame and handle. The door is designed to fit most GE oven models, including those with a built-in microwave. The door has two layers of tempered glass for safety and dur...

GE KNOB - Part# WB03K10301 is a replacement knob for a variety of GE ovens and ranges. It is made of durable plastic and features a chrome finish. The knob has a D-shaped shaft that fits into the control panel of the oven or range. It also has a set screw that secures it in place. This knob is des...

The GE Knob Thermostat Assembly (Part# WB03K10245) is a replacement part for many GE and Hotpoint ovens. It is a round, black knob with a white pointer that allows you to adjust the temperature of your oven. The knob has a range of settings from off to 500 degrees Fahrenheit. This part is made of ...

GE LATCH ASSEMBLY - Part# WB02K10149 is a replacement part for GE ovens. It is used to secure the oven door in place when it is closed. The latch assembly consists of two parts: the latch and the catch. The latch is a metal piece that attaches to the oven door and has a hook on one end that fits i...

GE LEG LEVELER - Part# WB02K10182 is a part used to level the legs of a GE range or cooktop. It is designed to help ensure that the appliance is level and stable on uneven surfaces. The leg leveler consists of two parts: a threaded stem and a plastic base. The threaded stem screws into the bottom ...

GE Panel Side BK - Part# WB63K10119 is a replacement part for a range or oven. It is the side panel that fits on the right side of the range or oven. It is made of black plastic and measures approximately 20 inches wide by 8 inches high. The part number WB63K10119 is used to identify this specific...

GE Plastic Nail Part# WB02K10075 is a plastic nail designed for use in drywall and other construction applications. It is made of a durable plastic material that is resistant to corrosion and rust. The nail has a flat head and a sharp point, making it easy to drive into drywall or other materials....

GE ROD SUPPORT - Part# WB02K10026 is a replacement part for GE ovens. It is a metal rod that supports the oven racks and helps to keep them in place. The rod is made of stainless steel and measures approximately 17 inches long. It has two ends that fit into the slots on the side of the oven cavity...

GE SCR 8-18 AB IHW 3/8 SN - Part# WB01K10042 is a GE-branded electric range surface element switch. This switch is designed to control the heating element on an electric range. It has 8 positions, 18 amps, and is rated for 3/8 inch terminals. The SN stands for "serial number," which is a unique id...

GE SCREW - Part# WB01K10091 is a genuine OEM (Original Equipment Manufacturer) part that is used in various GE appliances. It is a self-tapping screw that is used to secure the door panels on GE ovens, ranges, and cooktops. The screw has a Phillips head and measures approximately 1/2 inch in lengt...

GE SCREW 8-22 PL 1HX 71 - Part# WB01K10012 is a part manufactured by General Electric. It is a self-tapping screw made of steel and has a Phillips head. The screw has an 8-22 thread size, meaning that it has 8 threads per inch and the major diameter of the thread is 22mm. The “PL” in the part numb...

The GE Self Clean Thermostat (Part# WB20K10018) is a programmable thermostat that allows you to set your desired temperature and then automatically adjusts the temperature throughout the day. It also has a self-cleaning feature that helps keep your home comfortable and energy efficient. The thermo...

GE SPACER - Part# WB02K10161 is a replacement part for a range or oven. It is a black plastic spacer that fits between the oven door and the frame of the oven. The spacer helps to keep the door in place and prevents it from rattling or moving around when the oven is in use. It also helps to provid...

GE Surface Unit ASM 6 - Part# WB30K10016 is a replacement part for GE electric cooktops. It is a 6-inch surface unit assembly that includes the surface element, the terminal block, and the mounting bracket. The surface element is a coil type with infinite heat settings and is rated at 2,400 watts....

GE Surface Unit Assembly 8" - Part# WB30K10018 is a replacement part for a GE range or cooktop. It is an 8-inch surface unit assembly that includes the burner, burner cap, and terminal block. This part is used to replace a damaged or malfunctioning surface unit on a GE range or cooktop. The termin...

GE TRIM BOTTOM ASM - Part# WB07K10232 is a replacement part for General Electric (GE) range cooktops. It is a trim piece that fits along the bottom of the cooktop and helps to keep it looking neat and tidy. The trim piece is made of stainless steel and comes with all necessary mounting hardware. T...

GE TRIM FRONT FRAME - Part# WB04K10024 is a replacement part for a range or oven. It is the trim frame that goes around the front of the range or oven and provides a finished look. The trim frame is made of stainless steel and has a brushed finish. It is designed to fit GE ranges and ovens, includ...