Model: JB870DR2BB

GE BASE RAIL - Part# WB02T10352 is a part of the GE Profile Series of ovens. It is a metal rail that runs along the bottom of the oven cavity and helps to support the oven racks. The rail is made from stainless steel and has a black finish. It measures approximately 28 inches in length and 2 inche...

GE BASE RAIL - Part# WB02T10353 is a base rail for a range or oven. It is designed to provide a secure and stable platform for the range or oven to sit on. The base rail is made of heavy-duty steel and is designed to be durable and long-lasting. It features an adjustable height, allowing it to fit...

GE Bumper Door - Part# WB01T10022 is a replacement part for GE refrigerators. It is a white plastic door bumper that is used to cushion the door when it closes. The bumper helps to reduce noise and vibration when the door is opened and closed. It also helps to keep the door from slamming shut. The...

GE Clip Spacer Door Part# WB02T10497 is a replacement part for GE ovens. It is a plastic clip that is used to secure the oven door in place. The clip is designed to fit between the oven door and the frame of the oven, providing a secure fit and preventing the door from rattling or shifting when op...

GE Element Radiant 9 Dual (Part# WB30T10133) is a dual-element radiant cooktop designed for use with electric ranges. It features two 9-inch elements that can be used independently or together to provide a variety of cooking options. The elements are controlled by two separate knobs, allowing you ...

GE Frame Door Side - Part# WB56T10315 is a replacement part for GE ovens. It is the frame that holds the oven door in place. The frame is made of metal and has a black finish. It includes two screws for installation and measures approximately 16-1/2 inches wide by 8-1/2 inches high. This part is c...

GE GASKET OVEN DOOR - Part# WB04T10050 is a replacement part for GE ovens. It is a gasket that seals the oven door to the oven frame. The gasket helps to keep heat and moisture inside the oven, while also preventing air from entering the oven. The gasket is made of a durable rubber material and is...

The GE General Electric Hotpoint PartsIPS Kenmore Range Stove Oven Temperature Sensor Probe (Part# WB23T10015) is a replacement part for electric ovens. It is used to measure the temperature inside the oven and regulate the heating elements to maintain a consistent temperature. The sensor probe is...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop Appliance Lamp Assembly - 40W 120V Bulb - Part# WB08T10002 is a replacement part for many GE, Hotpoint, PartsIPS, and Kenmore stoves, ranges, ovens, cooktops and other appliances. This lamp assembly includes a 40 watt 120 v...

GE HANDLE (BK) - Part# WB15T10183 is a replacement handle for General Electric ovens. It is made of black plastic and is designed to fit most GE oven models. The handle measures approximately 8 inches long and 1.5 inches wide. It has two mounting holes on the back for easy installation. This handl...

GE Handle (Bk) - Part# WB15T10187 is a replacement handle for GE ovens. It is made of black plastic and is designed to fit a variety of GE oven models. The handle measures 8-1/2 inches long and 1-3/4 inches wide. It has two mounting holes on the back side, which are used to attach the handle to th...

GE HANDLE (WH) - Part# WB15T10176 is a replacement handle for GE ovens. It is made of white plastic and has a chrome finish. The handle measures 8-1/2" long and 1-3/4" wide. It is designed to fit most GE oven models, including JTP15, JTP20, JTP30, JTP45, JTP60, and JTP90. This handle is easy to in...

GE HANDLE (WH) - Part# WB15T10188 is a replacement handle for General Electric ovens. It is a white handle with a black plastic insert and is designed to fit GE oven models JGBS20BEA1WW, JGBS20BEA2WW, JGBS20BEA3WW, JGBS20BEA4WW, JGBS20DEA1WW, JGBS20DEA2WW, JGBS20DEA3WW and JGBS20DEA4WW. The handle...

GE HUB BLADE ASM - Part# WB02T10289 is a replacement part for a range of GE ovens. It is a hub blade assembly that is used to connect the oven's rotating rack to the motorized hub. The hub blade assembly consists of a metal blade, two plastic spacers, and two screws. The metal blade fits into the ...

GE Insulation Oven DR SDE is a high-performance insulation oven designed to provide superior thermal protection for industrial and commercial applications. This oven is designed to maintain a consistent temperature throughout the entire cooking process, ensuring that food is cooked evenly and cons...

GE KNOB INFINITE (WH) - Part# WB03T10282 is a replacement knob for GE range/ovens. It is made of durable plastic and has an infinite setting, which allows you to adjust the temperature or setting without having to turn the knob all the way around. The knob also features a white finish that blends ...

GE LAMP HALOGEN G9 - Part# WB08T10045 is a halogen light bulb made by General Electric. It is a G9 base type, which means it has two pins that are 9 millimeters apart. This bulb is designed to provide bright, white light with minimal energy consumption. It has a rated life of 2,000 hours and produ...

The GE Light Indicator Part# WB27T10668 is a light indicator that is used to indicate the status of an appliance. It is typically used in refrigerators, dishwashers, and other appliances. The indicator has two lights: one green and one red. The green light indicates that the appliance is functioni...

GE Lubricant Cleaner Part# WB02T10303 is a special cleaner designed to remove dirt, grease, and other contaminants from the moving parts of appliances. It is formulated to penetrate deep into the parts and dissolve the dirt and grease. The cleaner is safe for use on all types of appliances, includ...

GE Motor PSC Conv - Part# WB26T10043 is a motor and fan assembly for a range hood. It is designed to replace the existing motor and fan assembly in many GE, Hotpoint, and Kenmore range hoods. The motor is a permanent split capacitor (PSC) type, which means it has two windings that are permanently ...

GE NUT - Part# WB02T10017 is a replacement part for GE range/stove/ovens. It is a metal nut that is used to secure the oven door hinge to the oven frame. The nut has a diameter of 1/4 inch and is made of steel. It has a zinc plated finish for corrosion resistance. This part is compatible with many...

The GE Oven Bulb Lens - Part# WB25T10002 is a replacement part for a range of GE ovens. It is a glass lens that covers the light bulb in the oven, protecting it from heat and moisture. The lens also helps to diffuse the light from the bulb, making it easier to see inside the oven. The lens is made...

GE Rack Oven - Part# WB48T10050 is a commercial-grade oven designed for baking and roasting. It features a large capacity interior with adjustable racks that can accommodate up to four full-size sheet pans. The oven also has an electronic control panel with a digital display for easy operation and...

GE RANGETOP GLASS ASM BK - Part# WB62T10640 is a replacement part for a GE range top. It is a black glass assembly that covers the top of the range and provides a smooth, easy-to-clean surface. The part number WB62T10640 is specific to certain models of GE ranges, so it is important to check compa...

GE Retainer Insulation Oven Door (Part# WB02T10371) is a replacement part for GE ovens. It is a plastic retainer that holds the insulation in place on the oven door. The insulation helps to keep heat inside the oven and prevents it from escaping. This part is made of durable plastic and is designe...

GE SCREW 10-16 XC02 - Part# WB01T10066 is a screw manufactured by General Electric. It is a 10-16 thread size, with a coarse thread pitch and a 0.2 inch length. The part number is WB01T10066. This screw is used to secure the terminal block to the oven cavity wall in many GE ovens. It is made of st...

GE Switch Infinite Control - Part# WB24T10153 is a replacement part for a range of GE ovens. It is a thermostat switch that controls the temperature of the oven. The switch has an infinite control knob that allows you to adjust the temperature from off to maximum heat. The switch also has a safety...

GE Switch Infinite Control - Part# WB24T10162 is a replacement part for a range of GE ovens. It is an infinite switch that controls the heat of the oven. The switch has two terminals and is designed to be used with a variety of GE ovens. It can be used to replace an existing switch or to add addit...

HINGE ASM (LT) - Part# WB10T10105 is a left-hand hinge assembly for a range or oven. It is made of metal and plastic and includes the mounting screws. The hinge is designed to provide support for the door of the range or oven, allowing it to open and close smoothly. The hinge also helps to keep th...

HINGE ASM (RT) - Part# WB10T10104 is a right-hand hinge assembly for ovens. It is a replacement part manufactured by General Electric and is used to replace worn or broken hinges on ovens. The hinge assembly includes the hinge, mounting screws, and instructions for installation. The hinge is made ...

The Receiver Hinge UPR (LT) - Part# WB10T10101 is a part used in many General Electric (GE) and Hotpoint ovens. It is a replacement part for the upper right side of the oven door. The hinge is made of metal and has two mounting holes on the top and bottom. It also has two plastic bushings that fit...

The RH Hinge Receiver (Part# WB10T10100) is a replacement part for a range of ovens and cooktops. It is used to attach the oven door to the range body. The part is made of metal and is designed to fit into the right-hand side of the range body. It has two holes for screws that are used to secure i...