Model: JB750DF2CC

Badge GE Part# WB02T10589 is a replacement part for a range of General Electric (GE) ovens. It is a control panel badge that is used to identify the model and serial number of the oven. The badge is made of metal and has a black finish with white lettering. It measures approximately 2 inches by 1 ...

The GE Anti-Tip Bracket Assembly (Part# WB02T10578) is a safety device designed to prevent a range or stove from tipping over. It is made of metal and attaches to the rear of the range or stove and then to the floor. The bracket helps keep the appliance in place, even if someone bumps into it or p...

GE Control Surf ELEM - Part# WB24T10146 is a replacement part for GE ovens. It is a surface element that provides heat to the cooking surface of the oven. The part number WB24T10146 is an 8-inch, 3-turn, infinite switch that is used to control the heat output of the surface element. This part is c...

GE Element Haliant 12 TRPL Part# WB30T10155 is a replacement heating element for GE electric ranges. It is a 12-inch triple haliant element that provides three different wattage levels to give you more control over your cooking. The element has a wattage of 2400/1800/1200 watts and features an adj...

GE Element Radiant 5.5 in (Part# WB30T10145) is a replacement radiant element for GE electric ranges. It is a 5.5 inch round element with two 6-inch long heating coils that provide even heat distribution across the cooking surface. The element has a wattage of 2400 and is designed to fit into most...

GE Element Radiant 8 in - Part# WB30T10132 is a replacement part for GE electric ranges. It is an 8-inch radiant element that provides heat to the cooking surface of the range. The element has two coils, one on each side, that are connected to a terminal block at the back of the range. The element...

GE Gasket Oven Part# WB04T10086 is a replacement part for ovens. It is a gasket that seals the oven door to the frame of the oven. The gasket helps to keep heat and air from escaping the oven, which helps to maintain an even temperature throughout the cooking process. The gasket is made of a durab...

The GE General Electric Hotpoint PartsIPS Kenmore Range Cooktop Top Burner Infinite Switch 1500W - Part# WB24T10029 is a replacement part for electric cooktops. It is designed to control the heat output of the top burner on the cooktop. The switch has an infinite setting, which allows you to adjus...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Temperature Sensor Assembly - Part# WB21X22134 is a replacement part for ovens. It is designed to measure and monitor the temperature inside the oven cavity. The sensor assembly consists of a thermistor, which is a temperature-sensitive ...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop Terminal Block Assembly - Part# WB17T10011 is a replacement part for electric ranges. It is used to connect the power supply to the range. The terminal block assembly includes two terminal blocks, one for the power supply a...

GE HUB BLADE ASM - Part# WB02T10289 is a replacement part for a range of GE ovens. It is a hub blade assembly that is used to connect the oven's rotating rack to the motorized hub. The hub blade assembly consists of a metal blade, two plastic spacers, and two screws. The metal blade fits into the ...

GE LAMP HALOGEN G9 - Part# WB08T10045 is a halogen light bulb made by General Electric. It is a G9 base type, which means it has two pins that are 9 millimeters apart. This bulb is designed to provide bright, white light with minimal energy consumption. It has a rated life of 2,000 hours and produ...

GE LENS - Part# WB25T10103 is a replacement lens for GE ovens. It is a clear, flat glass lens that fits into the top of the oven cavity and provides a clear view of the food inside. The lens is designed to fit most GE oven models and can be easily installed with minimal tools. The lens helps to ev...

The GE Light Indicator Part# WB27T10668 is a light indicator that is used to indicate the status of an appliance. It is typically used in refrigerators, dishwashers, and other appliances. The indicator has two lights: one green and one red. The green light indicates that the appliance is functioni...

The GE Light Indicator Pilot Part# WB27T10627 is a replacement part for ovens and ranges. It is a small, round, black plastic part with a metal terminal and a light indicator. The light indicator is used to indicate when the oven or range is on or off. The terminal connects to the oven or range's ...

GE NUT - Part# WB02T10017 is a replacement part for GE range/stove/ovens. It is a metal nut that is used to secure the oven door hinge to the oven frame. The nut has a diameter of 1/4 inch and is made of steel. It has a zinc plated finish for corrosion resistance. This part is compatible with many...

GE OVDR GL INNR - Part# WB57K5230 is a part number for a General Electric (GE) oven inner glass door. This part is used to replace the inner glass panel of an oven door. It is made of tempered glass and is designed to fit most GE ovens. The part number includes the model number, WB57K5230, which h...

The GE Rack Oven (Part# WB48T10082) is a commercial-grade oven designed to provide consistent, even baking results. It features a unique design that allows for the baking of multiple racks of product at once, while still providing the same level of heat distribution and control as a traditional ov...

The GE ReFector Pan for Bake Element (Part# WB02T10509) is a replacement part for GE ovens. It is a flat, rectangular metal pan that fits underneath the bake element in the oven. The pan helps to reflect heat from the bake element back up into the oven cavity, ensuring even baking and cooking resu...

GE SCR 8-18 AB HXW 1/2 S - Part# WB01T10126 is a General Electric (GE) self-cleaning range (SCR) control board. It is an 8-inch wide, 18-inch high, 1/2 inch thick control board with a part number of WB01T10126. This control board is used to regulate the temperature and other settings on a GE self-...

GE SCREW - Part# WB01M10002 is a screw used to secure the oven door to the oven frame. It is made of stainless steel and has a Phillips head. The screw measures 3/4 inch in length and has a thread diameter of 8-32. This part is used in many GE oven models, including JTP30, JTP45, JTP50, JTP60, JTP...

GE SCREW MTG - Part# WB1X5364 is a mounting screw for General Electric (GE) appliances. It is used to secure the mounting plate of the appliance to the wall or cabinet. The screw is made of steel and has a black oxide finish for corrosion resistance. It measures 1/4 inch in diameter and 1-1/2 inch...

GE Switch Infinite Control - Part# WB24T10162 is a replacement part for a range of GE ovens. It is an infinite switch that controls the heat of the oven. The switch has two terminals and is designed to be used with a variety of GE ovens. It can be used to replace an existing switch or to add addit...

GE Unit ASM - Part# WB44T10104 is a replacement bake element for General Electric ovens. It is a genuine OEM part and is made of metal and wire. This bake element is used to heat the oven cavity and is located on the bottom of the oven. It has two mounting brackets that attach it to the oven wall....

GE Window Pack Assy - Part# WB56X22160 is a window assembly for GE refrigerators. It includes the window, frame, and gasket. The window is made of clear plastic and the frame is made of white plastic. The gasket seals the window to the refrigerator door to keep cold air in and warm air out. This p...

A PIN RANGETOP HINGE, Part# WB10T10116, is a type of hinge used to attach the range top to the range cabinet. It is designed to provide a secure connection between the two components and ensure that the range top remains in place. The hinge consists of two parts: a pin and a bracket. The pin is in...

Range glass door bracket (Part# WB02X21494) is a part used in some GE ranges. It is a metal bracket that attaches to the range's glass door and helps to secure it in place. The bracket has two mounting holes and comes with two screws for installation. It is used to keep the glass door from shiftin...

Range heat shields are designed to protect the range from excessive heat. The Range Heat Shield Part# WB02T10468 is a replacement part for GE ranges. It is made of stainless steel and is designed to fit around the bottom of the range, protecting it from heat generated by the oven. The shield helps...

The Range Radiant Element Bracket (Part# WB02X20902) is a replacement part for a range or oven. It is used to secure the radiant element to the cooktop. The bracket is made of metal and has two mounting holes for attaching the element. It also has two slots for securing the element in place. This ...