Model: JB655EK3ES

A drawer wedge is a small, plastic device that is used to keep a refrigerator drawer from sliding open. The drawer wedge is designed to fit into the groove of the refrigerator door and keep the drawer from opening. The drawer wedge is typically installed by pushing it into the groove of the refrig...

GE Bake Element - Part# WB44T10060 is a replacement bake element for GE ovens. It is a genuine OEM part and is made of metal and has two mounting brackets on the back. This bake element is rated at 240 volts and 3400 watts. It measures approximately 16-1/2 inches wide by 15-1/4 inches long. This b...

GE Broil Unit Asm - Part# WB44X30616 is a replacement part for General Electric ovens. It is a broil unit assembly that includes the broil element, the insulation, and the mounting bracket. The broil element is responsible for providing heat to the top of the oven cavity, while the insulation help...

The GE Cable Clip (Part# WB02X25982) is a small plastic clip designed to secure cables and wires in place. It is used to keep cords and wires organized and out of the way. The clip has two parts: a base that attaches to the wall or other surface, and a top that holds the cable in place. The clip i...

GE END PLATE LH DG - Part# WB07X29534 is a left-hand end plate for a General Electric (GE) dishwasher. This part is used to secure the interior components of the dishwasher, such as the spray arm, filter, and other parts. It is made of durable plastic and attaches to the left side of the dishwashe...

GE END PLATE RH DG - Part# WB07X29535 is a replacement part for GE brand ovens. It is the right-hand end plate for the oven door. This part is made of durable plastic and is designed to fit specific models of GE ovens. The end plate helps to keep the door securely closed and prevents heat from esc...

GE Faceplate Graphics (GY) - Part# WB07X26740 is a replacement part for General Electric (GE) brand appliances. It is a graphic overlay that fits over the existing faceplate of the appliance. This part includes a graphic design that can be used to customize the look of the appliance. The graphic o...

GE GASKET CONV FAN - Part# WB04T10080 is a replacement part for a GE range or oven. It is a fan gasket that is used to seal the fan motor to the oven cavity. The gasket helps to keep heat and air from escaping the oven cavity, ensuring that the oven operates efficiently. The gasket is made of dura...

GE GLASS RANGETOP ASSM (GY)+DW1 - Part# WB62X25972 is a part for a GE range top. It is an assembly that includes the glass top, burner grates, and the control knobs. The glass top is made of tempered glass and has a gray finish. The burner grates are made of cast iron and have a black finish. The ...

GE Handle and End Cap Assembly (Part# WB15X29386) is a genuine OEM replacement part for GE microwaves. This assembly includes the handle, end cap, and mounting screws. The handle is made of plastic and the end cap is made of metal. This assembly helps to secure the door to the microwave and provid...

The GE Knob Infinite CH Part# WB03X24965 is a replacement knob for GE and Hotpoint range ovens. It is made of durable plastic and features an infinite heat setting. This knob allows you to adjust the temperature of your oven from low to high with ease. The infinite setting allows you to adjust the...

The GE Oven Control T09 White LED - Part# WB27X29093 is a replacement part for General Electric ovens. It is a control board that controls the oven's temperature, bake and broil functions, as well as the clock and timer settings. The board has an LED display that shows the current temperature sett...

GE SCREW 10-32 CA TRT15 3.06 - Part# WB02X24268 is a screw manufactured by General Electric (GE). It is a 10-32 thread size, coarse thread, and has a length of 3.06 inches. The head type is a truss head with a flat top and Phillips drive. The material is steel with a zinc plated finish for corrosi...

GE SCREW MTG - Part# WB1X5364 is a mounting screw for General Electric (GE) appliances. It is used to secure the mounting plate of the appliance to the wall or cabinet. The screw is made of steel and has a black oxide finish for corrosion resistance. It measures 1/4 inch in diameter and 1-1/2 inch...

GE Switch Infinite Control - Part# WB24X25013 is a replacement part for GE range ovens. It is a temperature control switch that regulates the temperature of the oven. The switch has an infinite setting, which allows you to adjust the temperature in small increments, giving you more control over th...

Hinge Receiver - Part# WB10X29566 is a replacement part for a range of General Electric (GE) ovens. It is used to attach the oven door to the oven frame. The hinge receiver is made of metal and has two mounting holes for attaching it to the oven frame. It also has two slots for attaching the oven ...

Range Convection Fan Blade - Part# WB02X26501 is a replacement part for a range oven. It is used to circulate air in the oven during convection cooking. The fan blade is made of plastic and measures approximately 8 inches in diameter. It has a mounting hole in the center and four mounting holes ar...