Model: JB640SF2SS

Badge GE Part# WB02T10589 is a replacement part for a range of General Electric (GE) ovens. It is a control panel badge that is used to identify the model and serial number of the oven. The badge is made of metal and has a black finish with white lettering. It measures approximately 2 inches by 1 ...

The GE Anti-Tip Bracket Assembly (Part# WB02T10578) is a safety device designed to prevent a range or stove from tipping over. It is made of metal and attaches to the rear of the range or stove and then to the floor. The bracket helps keep the appliance in place, even if someone bumps into it or p...

GE BRACE CHASSIS RADIANT RT - Part# WB02T10463 is a replacement part for GE radiant cooktops. It is a metal frame that supports the cooktop and provides stability. The frame is made of stainless steel and has a black finish. It includes four mounting screws and two brackets for attaching the cookt...

The GE Bracket Radiant Element - Part# WB02X20940 is a replacement part for a range or oven. It is a bracket that holds the radiant element in place and is made of metal. The bracket has two mounting holes and comes with two screws for installation. This part is compatible with many GE, Hotpoint, ...

GE CLIP CABLE - Part# WB02T10177 is a replacement part for a range of GE ovens. It is a clip cable that connects the oven's control panel to the oven's main power supply. The clip cable is made of durable plastic and features two clips on either end that securely attach to the control panel and po...

GE Control Oven TO9 (ELEC) - Part# WB18X20153 is a replacement part for GE ovens. It is a control panel that allows you to control the temperature and other settings of your oven. This part includes the knob, display, and wiring harness. It is designed to fit specific GE models and replaces part n...

GE Control Surf ELEM - Part# WB24T10146 is a replacement part for GE ovens. It is a surface element that provides heat to the cooking surface of the oven. The part number WB24T10146 is an 8-inch, 3-turn, infinite switch that is used to control the heat output of the surface element. This part is c...

GE Drawer Body Asm Mech - Part# WB55T10178 is a replacement part for GE ovens. It is the drawer body assembly mechanism that holds the oven drawer in place. This part includes the drawer body, two drawer slides, and two screws. The drawer body is made of metal and has a black finish. The slides ar...

GE Element Radiant 5.5 in (Part# WB30T10145) is a replacement radiant element for GE electric ranges. It is a 5.5 inch round element with two 6-inch long heating coils that provide even heat distribution across the cooking surface. The element has a wattage of 2400 and is designed to fit into most...

GE Element Radiant 8 in - Part# WB30T10132 is a replacement part for GE electric ranges. It is an 8-inch radiant element that provides heat to the cooking surface of the range. The element has two coils, one on each side, that are connected to a terminal block at the back of the range. The element...

GE Element Radiant 9 Dual (Part# WB30T10133) is a dual-element radiant cooktop designed for use with electric ranges. It features two 9-inch elements that can be used independently or together to provide a variety of cooking options. The elements are controlled by two separate knobs, allowing you ...

The GE General Electric Hotpoint PartsIPS Kenmore Range Cooktop Top Burner Infinite Switch 1500W - Part# WB24T10029 is a replacement part for electric cooktops. It is designed to control the heat output of the top burner on the cooktop. The switch has an infinite setting, which allows you to adjus...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Bake Element - Part# WB44T10011 is a replacement part for electric ovens. It is a flat, metal heating element that is located on the bottom of the oven and provides heat for baking. The element has two terminals that connect to the oven'...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Temperature Sensor Assembly - Part# WB21X22134 is a replacement part for ovens. It is designed to measure and monitor the temperature inside the oven cavity. The sensor assembly consists of a thermistor, which is a temperature-sensitive ...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop Terminal Block Assembly - Part# WB17T10011 is a replacement part for electric ranges. It is used to connect the power supply to the range. The terminal block assembly includes two terminal blocks, one for the power supply a...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range OVEN RACK - Part# WB48T10063 is an oven rack designed to fit select GE, Hotpoint, PartsIPS and Kenmore range ovens. This oven rack is made of heavy-duty steel and features a durable porcelain finish that resists scratches and stains. Th...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Oven Range Door Gasket Seal - Part# WB04T10001 is a replacement part for ovens and ranges. It is a rubber gasket that seals the gap between the oven door and the frame of the oven. This gasket helps to keep heat inside the oven, ensuring that f...

GE LENS - Part# WB25T10103 is a replacement lens for GE ovens. It is a clear, flat glass lens that fits into the top of the oven cavity and provides a clear view of the food inside. The lens is designed to fit most GE oven models and can be easily installed with minimal tools. The lens helps to ev...

The GE Light Indicator Part# WB27T10668 is a light indicator that is used to indicate the status of an appliance. It is typically used in refrigerators, dishwashers, and other appliances. The indicator has two lights: one green and one red. The green light indicates that the appliance is functioni...

The GE Light Indicator Pilot Part# WB27T10627 is a replacement part for ovens and ranges. It is a small, round, black plastic part with a metal terminal and a light indicator. The light indicator is used to indicate when the oven or range is on or off. The terminal connects to the oven or range's ...

GE OVDR GL INNR - Part# WB57K5230 is a part number for a General Electric (GE) oven inner glass door. This part is used to replace the inner glass panel of an oven door. It is made of tempered glass and is designed to fit most GE ovens. The part number includes the model number, WB57K5230, which h...

GE PAD DOOR - Part# WB01T10026 is a replacement part for a range of GE ovens. It is a door pad that is used to control the oven temperature and settings. The pad is made of durable plastic and features an easy-to-use touchpad with a digital display. It has five buttons for controlling the oven, in...

GE SCR 10-16 AB HXW .532 - Part# WB01T10103 is a type of self-clinching nut manufactured by General Electric. It is made from steel and has a black oxide finish. The nut has a 10-32 thread size and an overall length of 0.532 inches. It is designed to be used with sheet metal that is between 0.032 ...

GE SCR 6-20 GXB IHXW 3/8 NI - Part# WB02T10324 is a part manufactured by General Electric. It is a 6-20 amp, single pole, double throw (SPDT) switch with a 3/8 inch non-insulated bushing. The switch is rated for 120/277 volts and has an interrupt rating of 10,000 amps. It is designed for use in re...

GE SCR 8-18 AB HXW 1/2 S - Part# WB01T10126 is a General Electric (GE) self-cleaning range (SCR) control board. It is an 8-inch wide, 18-inch high, 1/2 inch thick control board with a part number of WB01T10126. This control board is used to regulate the temperature and other settings on a GE self-...

GE SCREW - Part# WH2X930 is a self-tapping screw manufactured by General Electric. It is designed for use in a variety of applications, including electrical and plumbing installations. The screw is made from steel and has a zinc-plated finish for corrosion resistance. It features a Phillips head d...

GE SCREW 8-32 TPT FLR 270 - Part# WB01T10053 is a screw manufactured by General Electric. It is an 8-32 thread size, meaning that it has 32 threads per inch and a major diameter of 0.164 inches. The “TPT” in the part number stands for “tapped pilot thread”, which means that the screw has a pre-tap...

GE Switch Infinite Control - Part# WB24T10153 is a replacement part for a range of GE ovens. It is a thermostat switch that controls the temperature of the oven. The switch has an infinite control knob that allows you to adjust the temperature from off to maximum heat. The switch also has a safety...

GE Unit Broil Asm - Part# WB44X20897 is a replacement part for General Electric ovens. It is the broil unit assembly, which includes the broil element, the infinite switch, and the mounting bracket. The broil element is a heating element that is used to cook food at high temperatures. The infinite...

GE Window Pack Assy - Part# WB56X22160 is a window assembly for GE refrigerators. It includes the window, frame, and gasket. The window is made of clear plastic and the frame is made of white plastic. The gasket seals the window to the refrigerator door to keep cold air in and warm air out. This p...

Hinge Receiver - Part# WB10T10068 is a replacement part for a range of General Electric (GE) ovens. It is used to attach the oven door to the oven frame. The hinge receiver is made of metal and has two holes in it for attaching the door to the frame. It also has two tabs that fit into slots on the...

A PIN RANGETOP HINGE, Part# WB10T10116, is a type of hinge used to attach the range top to the range cabinet. It is designed to provide a secure connection between the two components and ensure that the range top remains in place. The hinge consists of two parts: a pin and a bracket. The pin is in...

Range heat shields are designed to protect the range from excessive heat. The Range Heat Shield Part# WB02T10468 is a replacement part for GE ranges. It is made of stainless steel and is designed to fit around the bottom of the range, protecting it from heat generated by the oven. The shield helps...

The Range Radiant Element Bracket (Part# WB02X20902) is a replacement part for a range or oven. It is used to secure the radiant element to the cooktop. The bracket is made of metal and has two mounting holes for attaching the element. It also has two slots for securing the element in place. This ...

The Wedge Drawer (Part# WB48T10068) is a replacement part for General Electric ovens. It is a drawer that fits into the bottom of the oven and provides additional storage space. The drawer is made of stainless steel and has a black handle. It measures approximately 20 inches wide by 17 inches deep...