Model: JB640DF1WW

The GE Anti-Tip Bracket Assembly (Part# WB02T10578) is a safety device designed to prevent a range or stove from tipping over. It is made of metal and attaches to the rear of the range or stove and then to the floor. The bracket helps keep the appliance in place, even if someone bumps into it or p...

GE BRACE CHASSIS RADIANT RT - Part# WB02T10463 is a replacement part for GE radiant cooktops. It is a metal frame that supports the cooktop and provides stability. The frame is made of stainless steel and has a black finish. It includes four mounting screws and two brackets for attaching the cookt...

The GE Bracket Radiant Element - Part# WB02X20940 is a replacement part for a range or oven. It is a bracket that holds the radiant element in place and is made of metal. The bracket has two mounting holes and comes with two screws for installation. This part is compatible with many GE, Hotpoint, ...

GE CLIP CABLE - Part# WB02T10177 is a replacement part for a range of GE ovens. It is a clip cable that connects the oven's control panel to the oven's main power supply. The clip cable is made of durable plastic and features two clips on either end that securely attach to the control panel and po...

GE Control Surf ELEM - Part# WB24T10146 is a replacement part for GE ovens. It is a surface element that provides heat to the cooking surface of the oven. The part number WB24T10146 is an 8-inch, 3-turn, infinite switch that is used to control the heat output of the surface element. This part is c...

GE Drawer Body Asm Mech - Part# WB55T10178 is a replacement part for GE ovens. It is the drawer body assembly mechanism that holds the oven drawer in place. This part includes the drawer body, two drawer slides, and two screws. The drawer body is made of metal and has a black finish. The slides ar...

GE Element Radiant 5.5 in (Part# WB30T10145) is a replacement radiant element for GE electric ranges. It is a 5.5 inch round element with two 6-inch long heating coils that provide even heat distribution across the cooking surface. The element has a wattage of 2400 and is designed to fit into most...

GE Element Radiant 8 in - Part# WB30T10132 is a replacement part for GE electric ranges. It is an 8-inch radiant element that provides heat to the cooking surface of the range. The element has two coils, one on each side, that are connected to a terminal block at the back of the range. The element...

GE Element Radiant 9 Dual (Part# WB30T10133) is a dual-element radiant cooktop designed for use with electric ranges. It features two 9-inch elements that can be used independently or together to provide a variety of cooking options. The elements are controlled by two separate knobs, allowing you ...

GE Faceplate Graphics (WW) - Part# WB27T11512 is a replacement part for General Electric (GE) ovens. It is a faceplate graphic that displays the oven's temperature settings and other information. The faceplate graphic is made of durable plastic and features a white background with black text. It i...

GE Frame Door Side (Wh) - Part# WB56T10290 is a replacement part for GE ovens. It is the white frame door side that fits onto the oven door. This part is made of durable plastic and is designed to fit perfectly onto the oven door. It includes two screws for installation and comes with a one-year l...

GE Gasket Oven Part# WB02T10027 is a replacement part for GE ovens. It is a gasket that seals the oven door to the frame of the oven. The gasket helps to keep heat and moisture inside the oven, ensuring that food cooks evenly and efficiently. The gasket is made of high-temperature silicone rubber ...

The GE General Electric Hotpoint PartsIPS Kenmore Range Cooktop Top Burner Infinite Switch 1500W - Part# WB24T10029 is a replacement part for electric cooktops. It is designed to control the heat output of the top burner on the cooktop. The switch has an infinite setting, which allows you to adjus...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Bake Element - Part# WB44T10011 is a replacement part for electric ovens. It is a flat, metal heating element that is located on the bottom of the oven and provides heat for baking. The element has two terminals that connect to the oven'...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop Terminal Block Assembly - Part# WB17T10011 is a replacement part for electric ranges. It is used to connect the power supply to the range. The terminal block assembly includes two terminal blocks, one for the power supply a...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range OVEN RACK - Part# WB48T10063 is an oven rack designed to fit select GE, Hotpoint, PartsIPS and Kenmore range ovens. This oven rack is made of heavy-duty steel and features a durable porcelain finish that resists scratches and stains. Th...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Oven Range Door Gasket Seal - Part# WB04T10001 is a replacement part for ovens and ranges. It is a rubber gasket that seals the gap between the oven door and the frame of the oven. This gasket helps to keep heat inside the oven, ensuring that f...

GE GLASS OVN DR OTR (WH) - Part# WB56T10356 is a replacement part for a GE oven door. It is a white, glass oven door with a handle. The part number WB56T10356 is the specific model number for this particular oven door. This part is designed to fit certain models of GE ovens and ranges, including s...

GE Handle (Le-Wh) - Part# WB15T10214 is a replacement handle for GE ovens. It is made of durable plastic and comes in a white finish. The handle measures 8 inches long and has two mounting holes for easy installation. This handle is designed to fit most GE oven models, including the JB750, JB850, ...

GE KNOB INFINITE is a replacement part for a range or stove. It is used to control the temperature of the burners on the range or stove. The part number WB03T10344 is specific to GE brand ranges and stoves. This knob is made of durable plastic and has an infinite setting, meaning it can be turned ...

GE LATCH & HANDLE ASM - Part# WB14T10093 is a replacement part for GE ovens. It is a latch and handle assembly that is used to secure the oven door closed. The assembly includes the latch, handle, screws, and other components necessary for installation. The latch and handle are made of durable pla...

GE LENS - Part# WB25T10103 is a replacement lens for GE ovens. It is a clear, flat glass lens that fits into the top of the oven cavity and provides a clear view of the food inside. The lens is designed to fit most GE oven models and can be easily installed with minimal tools. The lens helps to ev...

The GE Light Indicator Part# WB27T10668 is a light indicator that is used to indicate the status of an appliance. It is typically used in refrigerators, dishwashers, and other appliances. The indicator has two lights: one green and one red. The green light indicates that the appliance is functioni...

The GE Light Indicator Pilot Part# WB27T10627 is a replacement part for ovens and ranges. It is a small, round, black plastic part with a metal terminal and a light indicator. The light indicator is used to indicate when the oven or range is on or off. The terminal connects to the oven or range's ...

GE MAINTOP STRIKE is a replacement part for GE ovens. It is a metal strike plate that is used to secure the oven door in place. The strike plate is designed to fit into the frame of the oven door and hold it in place when the door is closed. The part number WB02T10026 is specific to GE ovens and c...

The GE Oven Light Cup (Part# WB02T10037) is a replacement part for General Electric ovens. It is a plastic cup that houses the oven light bulb and helps to diffuse the light evenly throughout the oven cavity. The cup also helps to protect the bulb from heat and moisture. This part is compatible wi...

GE PAD DOOR - Part# WB01T10026 is a replacement part for a range of GE ovens. It is a door pad that is used to control the oven temperature and settings. The pad is made of durable plastic and features an easy-to-use touchpad with a digital display. It has five buttons for controlling the oven, in...

GE SCR 10-16 AB HXW .532 - Part# WB01T10103 is a type of self-clinching nut manufactured by General Electric. It is made from steel and has a black oxide finish. The nut has a 10-32 thread size and an overall length of 0.532 inches. It is designed to be used with sheet metal that is between 0.032 ...

GE SCR 6-20 GXB IHXW 3/8 NI - Part# WB02T10324 is a part manufactured by General Electric. It is a 6-20 amp, single pole, double throw (SPDT) switch with a 3/8 inch non-insulated bushing. The switch is rated for 120/277 volts and has an interrupt rating of 10,000 amps. It is designed for use in re...

GE SCR 8-18 AB HXW 1/2 S - Part# WB01T10126 is a General Electric (GE) self-cleaning range (SCR) control board. It is an 8-inch wide, 18-inch high, 1/2 inch thick control board with a part number of WB01T10126. This control board is used to regulate the temperature and other settings on a GE self-...

GE SCREW - Part# WH2X930 is a self-tapping screw manufactured by General Electric. It is designed for use in a variety of applications, including electrical and plumbing installations. The screw is made from steel and has a zinc-plated finish for corrosion resistance. It features a Phillips head d...

GE SCREW 8-32 TPT FLR 270 - Part# WB01T10053 is a screw manufactured by General Electric. It is an 8-32 thread size, meaning that it has 32 threads per inch and a major diameter of 0.164 inches. The “TPT” in the part number stands for “tapped pilot thread”, which means that the screw has a pre-tap...

GE SHIELD HEAT BKGD - Part# WB02X20711 is a replacement part for GE ovens. It is a heat shield background that helps to protect the oven walls from heat damage. The part is made of stainless steel and is designed to fit most GE oven models. It helps to keep the interior of the oven clean and free ...

GE Support Rear - Part# WB48T10030 is a replacement part for GE ovens. It is a metal support that helps to hold the oven rack in place. The part is made of metal and is designed to fit specific models of GE ovens. It attaches to the back wall of the oven and helps to keep the rack from sliding out...

GE Switch Infinite Control - Part# WB24T10153 is a replacement part for a range of GE ovens. It is a thermostat switch that controls the temperature of the oven. The switch has an infinite control knob that allows you to adjust the temperature from off to maximum heat. The switch also has a safety...

GE TRM DR BTM CHNL - Part# WB07T10478 is a replacement part for a GE range. It is the bottom channel for the terminal block, which is used to connect the wiring harness to the range. The terminal block is located on the back of the range and provides power to the oven, stovetop, and other componen...

GE Unit Broil Asm - Part# WB44X20897 is a replacement part for General Electric ovens. It is the broil unit assembly, which includes the broil element, the infinite switch, and the mounting bracket. The broil element is a heating element that is used to cook food at high temperatures. The infinite...

A HINGE DOOR, Part# WB10T10071, is a type of door that is attached to a frame or wall by hinges. It is typically used in residential and commercial applications and can be opened inwards or outwards. The door is made of steel and has a white finish. It has two adjustable hinges for easy installati...

Hinge Receiver - Part# WB10T10068 is a replacement part for a range of General Electric (GE) ovens. It is used to attach the oven door to the oven frame. The hinge receiver is made of metal and has two holes in it for attaching the door to the frame. It also has two tabs that fit into slots on the...

A PIN RANGETOP HINGE, Part# WB10T10116, is a type of hinge used to attach the range top to the range cabinet. It is designed to provide a secure connection between the two components and ensure that the range top remains in place. The hinge consists of two parts: a pin and a bracket. The pin is in...

The Range Knob White Part# WB03X21412 is a replacement part for the range control knob on many GE and Hotpoint ranges. It is a white plastic knob with a metal shaft that fits into the range control panel. The knob has an off/on setting and five numbered settings for controlling the heat of the bur...

The Range Radiant Element Bracket (Part# WB02X20902) is a replacement part for a range or oven. It is used to secure the radiant element to the cooktop. The bracket is made of metal and has two mounting holes for attaching the element. It also has two slots for securing the element in place. This ...

The Wedge Drawer (Part# WB48T10068) is a replacement part for General Electric ovens. It is a drawer that fits into the bottom of the oven and provides additional storage space. The drawer is made of stainless steel and has a black handle. It measures approximately 20 inches wide by 17 inches deep...