Model: JB450RF1SS

GE Bracket Control Part# WB02K10150 is a part used in many GE ovens and ranges. It is a bracket that holds the oven door in place and helps to keep it from swinging open. The bracket is made of metal and has two holes for mounting screws. It also has two slots for the oven door handle to fit into....

The GE Bracket Cook Top - Part# WB37X20193 is a replacement part for a GE range. It is a metal bracket that attaches to the underside of the cooktop and supports the cooktop in place. The bracket is made of durable metal and is designed to fit all GE ranges. It includes two screws for installation...

GE Bracket MTG Terminal - Part# WB02K10029 is a mounting bracket for a terminal block. It is designed to provide secure and reliable mounting of the terminal block in an electrical panel. The bracket is made of steel and has a zinc-plated finish for corrosion resistance. It features two mounting h...

GE BUMPER - Part# WB02K10178 is a replacement part for General Electric (GE) range and ovens. It is a black plastic bumper that fits around the oven door to protect it from damage when closing the door. The bumper helps to keep the door from slamming shut and also helps to reduce noise when closin...

GE CLIP RECEPTICAL - Part# WB02K10133 is a replacement part for a range of GE ovens. It is a receptacle clip that holds the receptacle in place on the back of the oven. The clip is made of plastic and has two prongs that fit into the holes in the back of the oven. The clip also has two screws that...

GE Control Surf ELEM Part# WB23K10002 is a replacement surface element for GE electric ranges. It is a genuine OEM part and is designed to provide the same performance as the original part. The element has a 6-inch diameter and features a black finish. It is rated at 240 volts and 2100 watts, and ...

GE Control Surf ELEM - Part# WB23K10003 is a replacement surface element for GE electric ranges. It is a 6-inch, 8-turn, 3000 watt element that fits most GE electric ranges. This part is designed to replace the original element in your range and provide reliable performance. The element has an adj...

GE Drawer Support Part# WB02K10163 is a replacement part for GE ovens. It is a metal support that attaches to the oven drawer and helps to keep it in place. The support is made of durable metal and is designed to fit most GE ovens. It has two mounting holes for easy installation and comes with scr...

GE GASKET ASM DOOR - Part# WB04K10022 is a replacement part for General Electric (GE) ovens. It is a gasket assembly that seals the door of the oven. The gasket is made of durable rubber and helps to keep heat and moisture inside the oven, while preventing any air from escaping. This part helps to...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Bake Element - Part# WB44K10005 is a replacement part for electric ovens. It is a heating element that is located at the bottom of the oven and is responsible for providing the heat necessary to bake food. The element consists of a metal...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop Appliance Pilot Lamp - Part# WB25K10002 is a replacement part for various models of stoves, ranges, ovens, cooktops and other appliances. This pilot lamp is used to provide a visual indication that the appliance is on and f...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop Terminal Block Assembly - Part# WB17T10011 is a replacement part for electric ranges. It is used to connect the power supply to the range. The terminal block assembly includes two terminal blocks, one for the power supply a...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range CookTop 6" BOWL BLACK REAR BUBBLE - Part# WB31T10014 is a replacement part for a range cooktop. It is a 6-inch bowl that is black in color and has a rear bubble. This part is designed to fit certain models of GE, RCA, Hotpoint, PartsIPS, ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Range CookTop 8" BOWL BLACK REAR BUBBLE - Part# WB31T10015 is a replacement part for a range cooktop. It is an 8-inch bowl made of black material and has a rear bubble. This part is designed to fit specific models of GE, RCA, Hotpoint, PartsIPS...

The GE Grommet Handle (Part# WB01K10023) is a replacement handle for a variety of GE appliances. It is made of durable plastic and features a textured finish for easy gripping. The handle measures 4-1/2 inches in length and 1-3/4 inches in width. It has two mounting holes that are spaced 2-1/2 inc...

The GE KNOB VALVE - Part# WB03X21356 is a replacement part for GE range ovens. It is a black plastic knob that controls the temperature of the oven. The knob has a metal stem that fits into the valve stem on the back of the oven. This part is used to control the temperature of the oven and can be ...

GE LATCH ASSEMBLY - Part# WB02K10149 is a replacement part for GE ovens. It is used to secure the oven door in place when it is closed. The latch assembly consists of two parts: the latch and the catch. The latch is a metal piece that attaches to the oven door and has a hook on one end that fits i...

GE LEG LEVELER - Part# WB02K10182 is a part used to level the legs of a GE range or cooktop. It is designed to help ensure that the appliance is level and stable on uneven surfaces. The leg leveler consists of two parts: a threaded stem and a plastic base. The threaded stem screws into the bottom ...

GE Liner Asm Weld Door - Part# WB56X20537 is a replacement part for GE refrigerators. It is the liner assembly weld door that fits inside the refrigerator cabinet. This part helps to keep the cold air in and warm air out, helping to maintain a consistent temperature inside the refrigerator. The pa...

GE Oven Rack Part# WB48X20249 is a replacement oven rack for GE ovens. It is made of heavy-duty steel and is designed to fit perfectly in all GE ovens. The rack measures 24" wide by 16" deep and has two handles on either side for easy removal. It also features a non-stick coating to help prevent f...

GE Panel Side BK - Part# WB63K10119 is a replacement part for a range or oven. It is the side panel that fits on the right side of the range or oven. It is made of black plastic and measures approximately 20 inches wide by 8 inches high. The part number WB63K10119 is used to identify this specific...

GE Plastic Nail Part# WB02K10075 is a plastic nail designed for use in drywall and other construction applications. It is made of a durable plastic material that is resistant to corrosion and rust. The nail has a flat head and a sharp point, making it easy to drive into drywall or other materials....

GE Receptacle Push-In Part# WB08T10026 is a push-in receptacle designed for use with GE lighting fixtures. It is a single-pole, three-wire receptacle that is UL listed and CSA certified. The receptacle features a spring-loaded, self-aligning design that allows for easy installation and removal of ...

GE ROD SUPPORT - Part# WB02K10026 is a replacement part for GE ovens. It is a metal rod that supports the oven racks and helps to keep them in place. The rod is made of stainless steel and measures approximately 17 inches long. It has two ends that fit into the slots on the side of the oven cavity...

GE SCR 10-32 TR - Part# WB01T10008 is a range surface element terminal block manufactured by General Electric. It is designed to provide a secure connection between two wires or terminals. The terminal block features two 10-32 threaded studs, which are used to connect the wires or terminals. The t...

GE SCREW - Part# WB01K10091 is a genuine OEM (Original Equipment Manufacturer) part that is used in various GE appliances. It is a self-tapping screw that is used to secure the door panels on GE ovens, ranges, and cooktops. The screw has a Phillips head and measures approximately 1/2 inch in lengt...

GE SCREW 8-22 PL 1HX 71 - Part# WB01K10012 is a part manufactured by General Electric. It is a self-tapping screw made of steel and has a Phillips head. The screw has an 8-22 thread size, meaning that it has 8 threads per inch and the major diameter of the thread is 22mm. The “PL” in the part numb...

GE SCREW 8-32 TPT FLR 215 SN - Part# WB01T10020 is a type of screw manufactured by General Electric. It is an 8-32 thread size, meaning that it has 32 threads per inch and an outside diameter of 0.164 inches. The "TPT" in the part number stands for "tapped pilot thread," which means that the screw...

The GE Self Clean Thermostat (Part# WB20K10018) is a programmable thermostat that allows you to set your desired temperature and then automatically adjusts the temperature throughout the day. It also has a self-cleaning feature that helps keep your home comfortable and energy efficient. The thermo...

GE SPACER - Part# WB02K10161 is a replacement part for a range or oven. It is a black plastic spacer that fits between the oven door and the frame of the oven. The spacer helps to keep the door in place and prevents it from rattling or moving around when the oven is in use. It also helps to provid...

GE Surface Unit ASM 6 - Part# WB30K10016 is a replacement part for GE electric cooktops. It is a 6-inch surface unit assembly that includes the surface element, the terminal block, and the mounting bracket. The surface element is a coil type with infinite heat settings and is rated at 2,400 watts....

GE Surface Unit Assembly 8" - Part# WB30K10018 is a replacement part for a GE range or cooktop. It is an 8-inch surface unit assembly that includes the burner, burner cap, and terminal block. This part is used to replace a damaged or malfunctioning surface unit on a GE range or cooktop. The termin...

The GE Thermostat Knob Assembly (Part# WB03X21357) is a replacement part for GE brand ovens and ranges. It is used to control the temperature of the oven or range. The knob is made of plastic and has a black finish. It features a metal shaft that fits into the existing thermostat assembly. The kno...

GE TRIM DOOR - Part# WB07X20354 is a replacement part for GE microwaves. It is a trim door that fits over the microwave door to give it a finished look. The trim door is made of stainless steel and has a brushed finish. It measures approximately 20-3/4 inches wide by 4-1/2 inches high and has two ...

A Hinge Door (Part# WB10X21659) is a type of door that is attached to a frame by two or more hinges. It is typically used in residential and commercial applications, such as interior and exterior doors. The door opens by swinging outward or inward, depending on the type of hinge used. This particu...

Range End Support - Left (Part# WB07X20197) is a part used in many General Electric and Hotpoint ovens. It is the left side support for the range end. This part is made of metal and is used to hold up the range end of the oven. It attaches to the back wall of the oven and helps to keep the range e...

Range End Support - Right is a part used in many ranges and ovens. It is a metal bracket that attaches to the right side of the range or oven and supports the end of the cooktop. The part number for this part is WB07X20194. This part is made of metal and has two mounting holes for attaching it to ...

The Receiver Hinge, Part# WB10X20220, is a part used in many GE and Hotpoint ovens. It is a metal hinge that connects the oven door to the oven frame. The hinge is designed to provide a secure connection between the two parts while allowing for smooth and easy opening and closing of the door. The ...