Model: JB400SP6SS

The GE Anti-Tip Bracket Assembly (Part# WB02T10578) is a safety device designed to prevent a range or stove from tipping over. It is made of metal and attaches to the rear of the range or stove and then to the floor. The bracket helps keep the appliance in place, even if someone bumps into it or p...

GE Body Side Support Part# WB02T10034 is a part used in GE refrigerators. It is a support bracket that helps to secure the refrigerator door to the side of the refrigerator cabinet. The bracket is made of metal and has two mounting holes for attaching it to the side of the refrigerator cabinet. It...

GE BRACE CHASSIS RADIANT RT - Part# WB02T10463 is a replacement part for GE radiant cooktops. It is a metal frame that supports the cooktop and provides stability. The frame is made of stainless steel and has a black finish. It includes four mounting screws and two brackets for attaching the cookt...

The GE Bracket Radiant Element - Part# WB02T10464 is a replacement part for a range or oven. It is a bracket that holds the radiant element in place. The radiant element is the heating element that provides heat to the oven or range. This part is made of metal and is designed to fit specific model...

The GE Bracket Radiant Element - Part# WB02T10508 is a replacement part for GE ovens. It is a bracket that holds the radiant element in place. The radiant element is the heating element that provides heat to the oven cavity. This part is made of metal and has two mounting holes for attaching it to...

The GE Burner Switch (Part# WB24T10145) is a replacement part for a range or cooktop. It is used to control the heat of the burner. The switch has four positions: off, low, medium, and high. It is made of plastic and metal and is approximately 2 inches in diameter. The switch is designed to fit mo...

GE CLIP CABLE - Part# WB02T10177 is a replacement part for a range of GE ovens. It is a clip cable that connects the oven's control panel to the oven's main power supply. The clip cable is made of durable plastic and features two clips on either end that securely attach to the control panel and po...

GE Control Oven TO9 (ELEC) - Part# WB27T11278 is a replacement oven control board for General Electric ovens. It is designed to replace the original control board in GE ovens that have the model numbers listed below. This control board is used to regulate the temperature of the oven and manage oth...

GE Control Surf ELEM - Part# WB24T10146 is a replacement part for GE ovens. It is a surface element that provides heat to the cooking surface of the oven. The part number WB24T10146 is an 8-inch, 3-turn, infinite switch that is used to control the heat output of the surface element. This part is c...

GE Drawer Body Asm Mech - Part# WB55T10178 is a replacement part for GE ovens. It is the drawer body assembly mechanism that holds the oven drawer in place. This part includes the drawer body, two drawer slides, and two screws. The drawer body is made of metal and has a black finish. The slides ar...

GE Element Radiant 6 in - Part# WB30T10129 is a replacement part for GE electric ranges. It is a 6-inch radiant element that provides heat to the cooking surface of the range. The element has two coils, one on each side, and is designed to fit into a 6-inch opening in the cooktop. The element has ...

GE Element Radiant 8 in - Part# WB30T10132 is a replacement part for GE electric ranges. It is an 8-inch radiant element that provides heat to the cooking surface of the range. The element has two coils, one on each side, that are connected to a terminal block at the back of the range. The element...

GE Element Radiant 9 Dual (Part# WB30T10133) is a dual-element radiant cooktop designed for use with electric ranges. It features two 9-inch elements that can be used independently or together to provide a variety of cooking options. The elements are controlled by two separate knobs, allowing you ...

GE Frame Door Side (BK) - Part# WB56T10287 is a replacement part for GE ovens. It is the black frame that fits around the door of the oven. This part is made of metal and is designed to provide a secure fit for the door. It also helps to keep heat and steam from escaping from the oven when it is i...

GE Gasket Oven Part# WB02T10027 is a replacement part for GE ovens. It is a gasket that seals the oven door to the frame of the oven. The gasket helps to keep heat and moisture inside the oven, ensuring that food cooks evenly and efficiently. The gasket is made of high-temperature silicone rubber ...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range OVEN RACK - Part# WB48T10063 is an oven rack designed to fit select GE, Hotpoint, PartsIPS and Kenmore range ovens. This oven rack is made of heavy-duty steel and features a durable porcelain finish that resists scratches and stains. Th...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Oven Range Door Gasket Seal - Part# WB04T10001 is a replacement part for ovens and ranges. It is a rubber gasket that seals the gap between the oven door and the frame of the oven. This gasket helps to keep heat inside the oven, ensuring that f...

GE KNOB BLACK - Part# WB03T10281 is a replacement part for General Electric (GE) range/ovens. It is a black plastic knob with a white indicator line that is used to control the heat of the oven. The knob has a D-shaped shaft and includes a set screw and mounting hardware. This part is compatible w...

GE LENS - Part# WB25T10041 is a replacement lens for a range of GE ovens. It is made of high-temperature glass and is designed to fit into the existing opening in the oven. The lens measures 8-1/2 inches in diameter and is 1/4 inch thick. It has a white finish and is designed to provide even heat ...

GE Light Indicator Pilot Part# WB27T10626 is a replacement part for a range of GE ovens. It is a light indicator pilot that helps to indicate when the oven is on or off. The light indicator pilot has two parts: the pilot and the light. The pilot is a small metal tube that contains a flame, which i...

GE MAINTOP STRIKE is a replacement part for GE ovens. It is a metal strike plate that is used to secure the oven door in place. The strike plate is designed to fit into the frame of the oven door and hold it in place when the door is closed. The part number WB02T10026 is specific to GE ovens and c...

The GE Oven Light Cup (Part# WB02T10037) is a replacement part for General Electric ovens. It is a plastic cup that houses the oven light bulb and helps to diffuse the light evenly throughout the oven cavity. The cup also helps to protect the bulb from heat and moisture. This part is compatible wi...

GE PAD DOOR - Part# WB01T10026 is a replacement part for a range of GE ovens. It is a door pad that is used to control the oven temperature and settings. The pad is made of durable plastic and features an easy-to-use touchpad with a digital display. It has five buttons for controlling the oven, in...

GE Receptacle Push-In Part# WB08T10026 is a push-in receptacle designed for use with GE lighting fixtures. It is a single-pole, three-wire receptacle that is UL listed and CSA certified. The receptacle features a spring-loaded, self-aligning design that allows for easy installation and removal of ...

The GE ReFector Pan for Bake Element (Part# WB02T10509) is a replacement part for GE ovens. It is a flat, rectangular metal pan that fits underneath the bake element in the oven. The pan helps to reflect heat from the bake element back up into the oven cavity, ensuring even baking and cooking resu...

GE SCR 10-16 AB HXW .532 - Part# WB01T10103 is a type of self-clinching nut manufactured by General Electric. It is made from steel and has a black oxide finish. The nut has a 10-32 thread size and an overall length of 0.532 inches. It is designed to be used with sheet metal that is between 0.032 ...

GE SCR 10-32 TR - Part# WB01T10008 is a range surface element terminal block manufactured by General Electric. It is designed to provide a secure connection between two wires or terminals. The terminal block features two 10-32 threaded studs, which are used to connect the wires or terminals. The t...

GE SCR 6-20 GXB IHXW 3/8 NI - Part# WB02T10324 is a part manufactured by General Electric. It is a 6-20 amp, single pole, double throw (SPDT) switch with a 3/8 inch non-insulated bushing. The switch is rated for 120/277 volts and has an interrupt rating of 10,000 amps. It is designed for use in re...

GE SCREW 8-32 TPT FLR 270 - Part# WB01T10053 is a screw manufactured by General Electric. It is an 8-32 thread size, meaning that it has 32 threads per inch and a major diameter of 0.164 inches. The “TPT” in the part number stands for “tapped pilot thread”, which means that the screw has a pre-tap...

GE Support Draw Part# WB48T10013 is a support drawer for GE ovens. It is designed to provide additional storage space in the oven cavity and to help support heavier items such as roasting pans. The drawer is made of heavy-duty steel and features a durable powder-coat finish. It has a capacity of u...

GE Support Rear - Part# WB48T10030 is a replacement part for GE ovens. It is a metal support that helps to hold the oven rack in place. The part is made of metal and is designed to fit specific models of GE ovens. It attaches to the back wall of the oven and helps to keep the rack from sliding out...

GE SWITCH INFIN - Part# WB24T10058 is a replacement infinite switch for GE electric ranges. It is used to control the heat of the surface burners on the range. The switch has 6 terminals and is rated at 250V, 15A. It is designed to replace the original infinite switch on GE ranges with model numbe...

GE Switch Rocker Elem (BK) - Part# WB24T10165 is a replacement part for General Electric ovens. It is a black switch rocker element that is used to control the temperature of the oven. The switch rocker element is located on the back of the oven and is used to turn the oven on and off, as well as ...

GE Unit ASM - Part# WB44T10104 is a replacement bake element for General Electric ovens. It is a genuine OEM part and is made of metal and wire. This bake element is used to heat the oven cavity and is located on the bottom of the oven. It has two mounting brackets that attach it to the oven wall....

GE Unit Broil Asm - Part# WB44T10094 is a replacement part for General Electric ovens. It is the broil unit assembly, which includes the heating element, insulation, and mounting bracket. The heating element is used to heat the oven during the broiling process. The insulation helps to keep the hea...

A HINGE DOOR, Part# WB10T10070, is a type of door that is designed to open and close with the help of hinges. The door is made up of two parts: the frame and the door itself. The frame is typically made from wood or metal and provides support for the door. The door itself is usually made from wood...

Hinge Receiver - Part# WB10T10068 is a replacement part for a range of General Electric (GE) ovens. It is used to attach the oven door to the oven frame. The hinge receiver is made of metal and has two holes in it for attaching the door to the frame. It also has two tabs that fit into slots on the...

A PIN RANGETOP HINGE, Part# WB10T10116, is a type of hinge used to attach the range top to the range cabinet. It is designed to provide a secure connection between the two components and ensure that the range top remains in place. The hinge consists of two parts: a pin and a bracket. The pin is in...

The Range Radiant Element Bracket (Part# WB02T10480) is a replacement part for a range or oven. It is used to secure the radiant element to the cooktop. The bracket is made of metal and has two holes for mounting screws. It is designed to fit most GE, Hotpoint, and Kenmore ranges and ovens. The br...

The Wedge Drawer (Part# WB48T10068) is a replacement part for General Electric ovens. It is a drawer that fits into the bottom of the oven and provides additional storage space. The drawer is made of stainless steel and has a black handle. It measures approximately 20 inches wide by 17 inches deep...