Model: JB350DF2BB

Badge GE Part# WB02T10589 is a replacement part for a range of General Electric (GE) ovens. It is a control panel badge that is used to identify the model and serial number of the oven. The badge is made of metal and has a black finish with white lettering. It measures approximately 2 inches by 1 ...

The GE 8" Surface Heating Element - Part# WB30X20483 is a replacement part for a range or cooktop. It is an 8-inch round heating element that provides heat to the cooking surface. The element is made of stainless steel and has a wattage rating of 2,500 watts. It is designed to fit most GE and Hotp...

The GE Anti-Tip Bracket Assembly (Part# WB02T10578) is a safety device designed to prevent a range or stove from tipping over. It is made of metal and attaches to the rear of the range or stove and then to the floor. The bracket helps keep the appliance in place, even if someone bumps into it or p...

GE Body Side Support Part# WB02T10034 is a part used in GE refrigerators. It is a support bracket that helps to secure the refrigerator door to the side of the refrigerator cabinet. The bracket is made of metal and has two mounting holes for attaching it to the side of the refrigerator cabinet. It...

The GE CLIP RECEPTACLE - Part# WB02K10381 is a replacement part for a range of GE appliances. It is a clip receptacle that connects the wires from the appliance to the power source. This part is made of plastic and has two terminals for connecting the wires. It also has two mounting holes for secu...

GE CLIP RECEPTACLE - Part# WB17T10009 is a receptacle manufactured by General Electric. It is a two-pole, three-wire grounding type receptacle that is designed to be used with a 15 or 20 amp circuit. The receptacle has two slots for plugging in two-pronged plugs and one U-shaped hole for the groun...

GE Drawer Body Asm Mech - Part# WB55T10178 is a replacement part for GE ovens. It is the drawer body assembly mechanism that holds the oven drawer in place. This part includes the drawer body, two drawer slides, and two screws. The drawer body is made of metal and has a black finish. The slides ar...

GE Faceplate Graphics (BK) Part# WB27T11511 is a replacement part for GE ovens. It is a black faceplate with graphics that is used to replace the existing faceplate on the oven. The faceplate includes graphics such as temperature settings, clock, timer, and other controls. This part is designed to...

GE Frame Door Side (BK) - Part# WB56T10287 is a replacement part for GE ovens. It is the black frame that fits around the door of the oven. This part is made of metal and is designed to provide a secure fit for the door. It also helps to keep heat and steam from escaping from the oven when it is i...

GE Gasket Oven Part# WB02T10027 is a replacement part for GE ovens. It is a gasket that seals the oven door to the frame of the oven. The gasket helps to keep heat and moisture inside the oven, ensuring that food cooks evenly and efficiently. The gasket is made of high-temperature silicone rubber ...

The GE General Electric Hotpoint PartsIPS Kenmore Range Cooktop Top Burner Infinite Switch 1500W - Part# WB24T10029 is a replacement part for electric cooktops. It is designed to control the heat output of the top burner on the cooktop. The switch has an infinite setting, which allows you to adjus...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Bake Element - Part# WB44T10011 is a replacement part for electric ovens. It is a flat, metal heating element that is located on the bottom of the oven and provides heat for baking. The element has two terminals that connect to the oven'...

The GE General Electric Hotpoint PartsIPS Kenmore Range Oven Temperature Sensor Assembly - Part# WB21X22134 is a replacement part for ovens. It is designed to measure and monitor the temperature inside the oven cavity. The sensor assembly consists of a thermistor, which is a temperature-sensitive ...

The GE General Electric Hotpoint PartsIPS Kenmore Range Stove Cook Top 6" DRIP BOWL REAR BUBBLE CHROME - Part# WB31T10010 is a replacement part for a range stove cook top. It is a 6 inch chrome drip bowl that fits in the rear of the cook top. The bowl is designed to catch any spills or splatters t...

The GE General Electric Hotpoint PartsIPS Kenmore Range Stove Cook Top 8" DRIP BOWL REAR BUBBLE CHROME - Part# WB31T10011 is a replacement part for a range or stove top. It is an 8-inch chrome drip bowl that fits in the rear of the cooktop. The bowl catches any spills or splatters that occur while...

The GE General Electric Hotpoint PartsIPS Kenmore Stove Range Oven Cooktop Terminal Block Assembly - Part# WB17T10011 is a replacement part for electric ranges. It is used to connect the power supply to the range. The terminal block assembly includes two terminal blocks, one for the power supply a...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Oven Range Door Gasket Seal - Part# WB04T10001 is a replacement part for ovens and ranges. It is a rubber gasket that seals the gap between the oven door and the frame of the oven. This gasket helps to keep heat inside the oven, ensuring that f...

GE LENS - Part# WB25T10041 is a replacement lens for a range of GE ovens. It is made of high-temperature glass and is designed to fit into the existing opening in the oven. The lens measures 8-1/2 inches in diameter and is 1/4 inch thick. It has a white finish and is designed to provide even heat ...

GE Light Indicator Pilot Part# WB27T10626 is a replacement part for a range of GE ovens. It is a light indicator pilot that helps to indicate when the oven is on or off. The light indicator pilot has two parts: the pilot and the light. The pilot is a small metal tube that contains a flame, which i...

GE Lubricant Cleaner Part# WB02T10303 is a special cleaner designed to remove dirt, grease, and other contaminants from the moving parts of appliances. It is formulated to penetrate deep into the parts and dissolve the dirt and grease. The cleaner is safe for use on all types of appliances, includ...

GE MAINTOP STRIKE is a replacement part for GE ovens. It is a metal strike plate that is used to secure the oven door in place. The strike plate is designed to fit into the frame of the oven door and hold it in place when the door is closed. The part number WB02T10026 is specific to GE ovens and c...

GE OVDR GL INNR - Part# WB57K5230 is a part number for a General Electric (GE) oven inner glass door. This part is used to replace the inner glass panel of an oven door. It is made of tempered glass and is designed to fit most GE ovens. The part number includes the model number, WB57K5230, which h...

The GE Oven Light Cup (Part# WB02T10037) is a replacement part for General Electric ovens. It is a plastic cup that houses the oven light bulb and helps to diffuse the light evenly throughout the oven cavity. The cup also helps to protect the bulb from heat and moisture. This part is compatible wi...

The GE Rack Oven (Part# WB48T10082) is a commercial-grade oven designed to provide consistent, even baking results. It features a unique design that allows for the baking of multiple racks of product at once, while still providing the same level of heat distribution and control as a traditional ov...

GE Rangetop Mech ASM - Part# WB62T10613 is a replacement part for a GE range top. It is an assembly that includes the knobs, switches, and other components that control the range top. This part is used to replace a damaged or malfunctioning range top control panel. It includes the knobs, switches,...

GE Receptacle Push-In Part# WB08T10026 is a push-in receptacle designed for use with GE lighting fixtures. It is a single-pole, three-wire receptacle that is UL listed and CSA certified. The receptacle features a spring-loaded, self-aligning design that allows for easy installation and removal of ...

GE ROD SUPPORT - Part# WB02T10025 is a replacement part for GE ovens. It is a metal rod that supports the oven racks and helps to keep them in place. The rod is made of stainless steel and measures approximately 18 inches long. It has two mounting holes at each end for easy installation. This part...

GE SCR 10-16 AB HXW .532 - Part# WB01T10103 is a type of self-clinching nut manufactured by General Electric. It is made from steel and has a black oxide finish. The nut has a 10-32 thread size and an overall length of 0.532 inches. It is designed to be used with sheet metal that is between 0.032 ...

GE SCR 10-32 TR - Part# WB01T10008 is a range surface element terminal block manufactured by General Electric. It is designed to provide a secure connection between two wires or terminals. The terminal block features two 10-32 threaded studs, which are used to connect the wires or terminals. The t...

GE SCR 8-18 AB HXW 1/2 S - Part# WB01T10126 is a General Electric (GE) self-cleaning range (SCR) control board. It is an 8-inch wide, 18-inch high, 1/2 inch thick control board with a part number of WB01T10126. This control board is used to regulate the temperature and other settings on a GE self-...

GE SCREW - Part# WH2X930 is a self-tapping screw manufactured by General Electric. It is designed for use in a variety of applications, including electrical and plumbing installations. The screw is made from steel and has a zinc-plated finish for corrosion resistance. It features a Phillips head d...

GE SCREW 10-16 XC02 - Part# WB01T10066 is a screw manufactured by General Electric. It is a 10-16 thread size, with a coarse thread pitch and a 0.2 inch length. The part number is WB01T10066. This screw is used to secure the terminal block to the oven cavity wall in many GE ovens. It is made of st...

GE SCREW 8-32 TPT FLR 270 - Part# WB01T10053 is a screw manufactured by General Electric. It is an 8-32 thread size, meaning that it has 32 threads per inch and a major diameter of 0.164 inches. The “TPT” in the part number stands for “tapped pilot thread”, which means that the screw has a pre-tap...

GE SCREW MTG - Part# WB1X5364 is a mounting screw for General Electric (GE) appliances. It is used to secure the mounting plate of the appliance to the wall or cabinet. The screw is made of steel and has a black oxide finish for corrosion resistance. It measures 1/4 inch in diameter and 1-1/2 inch...

GE Support Draw Part# WB48T10013 is a support drawer for GE ovens. It is designed to provide additional storage space in the oven cavity and to help support heavier items such as roasting pans. The drawer is made of heavy-duty steel and features a durable powder-coat finish. It has a capacity of u...

GE Support Rear - Part# WB48T10030 is a replacement part for GE ovens. It is a metal support that helps to hold the oven rack in place. The part is made of metal and is designed to fit specific models of GE ovens. It attaches to the back wall of the oven and helps to keep the rack from sliding out...

GE SWITCH INFIN - Part# WB24T10058 is a replacement infinite switch for GE electric ranges. It is used to control the heat of the surface burners on the range. The switch has 6 terminals and is rated at 250V, 15A. It is designed to replace the original infinite switch on GE ranges with model numbe...

GE Unit Broil Asm - Part# WB44X20897 is a replacement part for General Electric ovens. It is the broil unit assembly, which includes the broil element, the infinite switch, and the mounting bracket. The broil element is a heating element that is used to cook food at high temperatures. The infinite...

GE Window Pack Assy - Part# WB56X22160 is a window assembly for GE refrigerators. It includes the window, frame, and gasket. The window is made of clear plastic and the frame is made of white plastic. The gasket seals the window to the refrigerator door to keep cold air in and warm air out. This p...

Hinge Receiver - Part# WB10T10068 is a replacement part for a range of General Electric (GE) ovens. It is used to attach the oven door to the oven frame. The hinge receiver is made of metal and has two holes in it for attaching the door to the frame. It also has two tabs that fit into slots on the...

A PIN RANGETOP HINGE, Part# WB10T10116, is a type of hinge used to attach the range top to the range cabinet. It is designed to provide a secure connection between the two components and ensure that the range top remains in place. The hinge consists of two parts: a pin and a bracket. The pin is in...

Range glass door bracket (Part# WB02X21494) is a part used in some GE ranges. It is a metal bracket that attaches to the range's glass door and helps to secure it in place. The bracket has two mounting holes and comes with two screws for installation. It is used to keep the glass door from shiftin...

Range heat shields are designed to protect the range from excessive heat. The Range Heat Shield Part# WB02T10468 is a replacement part for GE ranges. It is made of stainless steel and is designed to fit around the bottom of the range, protecting it from heat generated by the oven. The shield helps...

The Wedge Drawer (Part# WB48T10068) is a replacement part for General Electric ovens. It is a drawer that fits into the bottom of the oven and provides additional storage space. The drawer is made of stainless steel and has a black handle. It measures approximately 20 inches wide by 17 inches deep...