Model: JB256DM2BB

The GE 6" Burner with Sensor (Part# WB30X31058) is a replacement burner for electric ranges. It is designed to fit GE, Hotpoint, and Kenmore models. The burner has a 6-inch diameter and features a sensor that monitors the temperature of the burner and adjusts the heat output accordingly. The senso...

The GE 8" Burner with Sensor (Part# WB30X31057) is a replacement part for a range or cooktop. It is an 8-inch burner with a sensor that detects when the burner is on and off. The sensor helps to regulate the temperature of the burner, ensuring that it does not get too hot or too cold. The burner a...

GE Bracket Asm Anti-Tip - Part# WB02X32405 is a bracket assembly designed to prevent a range from tipping over. It is made of metal and attaches to the rear of the range. The bracket is secured to the floor with screws and helps keep the range in place, preventing it from tipping over if someone w...

The GE Bracket Cook Top - Part# WB37X20193 is a replacement part for a GE range. It is a metal bracket that attaches to the underside of the cooktop and supports the cooktop in place. The bracket is made of durable metal and is designed to fit all GE ranges. It includes two screws for installation...

GE COOKTOP BLACK - Part# WB62K10085 is a black electric cooktop manufactured by General Electric. It is a 30-inch, four-burner cooktop with a black ceramic glass surface. The cooktop has two 6-inch and two 8-inch burners, each with its own temperature control knob. The knobs are located on the fro...

The GE General Electric Hotpoint PartsIPS Kenmore Range Stove Cook Top Burner Infinite Switch 1250W - Part# WB24T10022 is a replacement part for a range, stove, cook top, or burner. It is an infinite switch that controls the heat output of the burner. The switch has 1250 watts of power and is desi...

GE Glass Oven Door (Dropship) - Part# WB56X21358 is a replacement part for GE ovens. It is a full-length glass door with a stainless steel frame and handle. The door is designed to fit most GE oven models and is easy to install. The glass panel allows you to see inside the oven while cooking, so y...

GE GROMMET - Part# WB02K10294 is a grommet used to seal the connection between two components in a variety of appliances. It is made of rubber and is designed to fit into a hole in the appliance. The grommet helps to prevent water, dust, and other debris from entering the appliance and damaging it...

The GE KNOB VALVE - Part# WB03X21356 is a replacement part for GE range ovens. It is a black plastic knob that controls the temperature of the oven. The knob has a metal stem that fits into the valve stem on the back of the oven. This part is used to control the temperature of the oven and can be ...

GE LATCH ASSEMBLY - Part# WB02K10144 is a replacement part for GE ovens. It is a latch assembly that is used to secure the oven door in place. The latch assembly consists of two parts: the latch and the strike plate. The latch is a metal piece that has two hooks on either side that fit into the st...

GE Liner Asm Weld Door - Part# WB56X20537 is a replacement part for GE refrigerators. It is the liner assembly weld door that fits inside the refrigerator cabinet. This part helps to keep the cold air in and warm air out, helping to maintain a consistent temperature inside the refrigerator. The pa...

The GE Oven Control T09 White LED - Part# WB27X29091 is a replacement part for General Electric ovens. It is a white LED display that is used to control the oven's temperature, timer, and other settings. The part number WB27X29091 is the exact replacement for the original part that came with the o...

GE Overlay T09 - Part# WB07X24620 is a replacement part for GE range and ovens. It is a black plastic overlay that fits over the existing control panel of the range or oven. The overlay covers the existing control panel and provides a new look to the appliance. It is designed to fit select GE rang...

A Hinge Door (Part# WB10X21982) is a type of door that is attached to a frame or wall by two or more hinges. It is typically used in residential and commercial applications, such as interior and exterior doors. The hinge door is designed to open and close easily, while providing security and stabi...

Range drawer mounting bracket, Part# WB02K10398, is a metal bracket used to mount the range drawer to the range. It is typically located at the bottom of the range and is used to secure the drawer in place. The bracket consists of two pieces: a top piece that attaches to the range and a bottom pie...

Range End Support - Left (Part# WB07X20197) is a part used in many General Electric and Hotpoint ovens. It is the left side support for the range end. This part is made of metal and is used to hold up the range end of the oven. It attaches to the back wall of the oven and helps to keep the range e...

Range End Support - Right is a part used in many ranges and ovens. It is a metal bracket that attaches to the right side of the range or oven and supports the end of the cooktop. The part number for this part is WB07X20194. This part is made of metal and has two mounting holes for attaching it to ...

Range Leveling Leg Part# WB02X29030 is a part used in many different types of ranges and ovens. It is a metal leg that helps to level the range or oven so that it sits evenly on the floor. The leg is adjustable, allowing you to raise or lower it as needed. This part is important for ensuring that ...