Model: HYG3658AWW

Maytag Collector Duct - Part# 12001324 is a part used in Maytag dryers. It is a metal duct that collects lint and other debris from the dryer and directs it to the lint trap. The duct is designed to fit specific models of Maytag dryers, and it is important to make sure that the part number matches...

The Maytag Gas Valve (with Orifice) Part# 31001485 is a gas valve that is used in Maytag gas dryers. It is designed to regulate the flow of gas to the burner in the dryer. The valve has an orifice, which is a small hole that allows for precise control of the gas flow. The orifice also helps to pre...

Maytag KIT, CONVERSION (LP - Part# 12001031 is a conversion kit that allows a Maytag appliance to be converted from natural gas to liquid propane. This kit includes all the necessary components to make the conversion, including an LP orifice, an LP regulator, and a conversion label. The kit also i...

The Maytag P-1 BRACE CYLINDER SUPPO - Part# 53-1625 is a part used in Maytag washing machines. It is a cylindrical support that helps to keep the cylinder in place and provide stability to the machine. The part is made of durable plastic and is designed to last for many years. It has a diameter of...

The Maytag P-1 SEAL ASM, CYL FRONT - Part# 31001637 is a replacement part for Maytag washing machines. It is a rubber seal that fits around the front of the cylinder and helps to keep water from leaking out of the machine. The seal is made of durable rubber and is designed to last for many years. ...

The Maytag P-1 SPRING, IDLER - Part# 31001465 is a replacement part for Maytag washing machines. It is a spring-loaded idler pulley that helps to keep the belt tensioned on the drive motor and helps to keep the belt from slipping off of the pulleys. The idler pulley is made of metal and has a plas...

The Maytag REINFORCEMENT BRACE/GLIDE - Part# 12002126 is a replacement part for Maytag washers. It is designed to reinforce the lower front panel of the washer and provide a smooth gliding surface for the drawer. The brace is made of metal and has two holes in it for mounting screws. It also has a...

This is a replacement blower wheel for a variety of clothes dryers from the brands Maytag, Whirlpool, KitchenAid, Magic Chef, Roper, Norge, PartsIPS Kenmore, Admiral and Amana. The wheel has a diameter of 8 inches and is part number 31001317. It is designed to fit into the blower housing of the dr...

Whirlpool GLIDE is a washing machine part that is designed to help reduce the amount of time and effort needed to clean clothes. The part is made up of a stainless steel ball bearing that is attached to a flexible plastic disc. This disc helps to reduce friction between the clothes and the drum of...

Whirlpool GLIDE is a high-efficiency washer that uses advanced technology to provide a powerful and efficient cleaning experience. The Whirlpool GLIDE Part# WP31001470 is a 4.5 cu. ft. top-load washer with a stainless steel drum and direct drive motor for quiet operation. It features an intuitive ...

The Whirlpool Idler Arm, Part# WP31001710, is a replacement part for many Whirlpool washing machines. It is used to help the belt tensioner move the belt in a smooth and consistent manner. The idler arm is made of metal and has a plastic wheel on one end that fits into the belt tensioner. The othe...

The Whirlpool Igniter Part# WP31001556 is a replacement part for gas ovens and ranges. It is a high-quality, durable igniter that is designed to ignite the gas in the oven or range. The igniter works by using an electrical current to heat up a small metal coil, which then produces a spark that ign...

Whirlpool LP GAS CON - Part# WP63-6766 is a gas conversion kit for Whirlpool appliances. This kit is designed to convert natural gas appliances to propane (LP) gas. It includes all the necessary components to make the conversion, including a new LP orifice, a new LP regulator, and a new LP hose. T...

Whirlpool PAD-GLIDE Part# WP31001356 is a replacement part for Whirlpool washers. It is a gliding pad that helps to reduce friction between the washer tub and the basket. This part helps to reduce noise and vibration, while also helping to protect the finish of the washer tub. The pad is made of a...

The Whirlpool PULLEY-MO Part# WP31001535 is a replacement part for washing machines. It is a pulley that helps to drive the belt that turns the drum of the washing machine. The pulley is made of metal and has a diameter of 3 inches. It has a 1/2 inch bore and comes with a mounting bracket and hard...

The Whirlpool Seal Assy - Part# WP31001637 is a replacement part for Whirlpool washers. It is a rubber seal that fits around the outer edge of the washer tub and helps to keep water from leaking out of the washer. The seal also helps to reduce noise and vibration during the wash cycle. This part i...

The Whirlpool SEAL-DOOR - Part# WP31001529 is a replacement part for a variety of Whirlpool refrigerators. It is a door seal that helps to keep the cold air inside the refrigerator and prevent warm air from entering. The seal is made of durable plastic and features an adhesive backing for easy ins...

Whirlpool Thermst-Fix Part# WP53-1096 is a thermal fuse designed to protect appliances from overheating. It is a safety device that shuts off the power to the appliance if it reaches a certain temperature. The Whirlpool Thermst-Fix Part# WP53-1096 is designed to be used in dryers, dishwashers, and...

The Whirlpool Timer Part# WP31001731 is a replacement timer for Whirlpool washing machines. It is a mechanical timer that controls the length of the wash cycle. It has a dial with settings for different wash cycles, such as normal, delicate, and permanent press. The timer also has a knob to adjust...