Model: HTW240ASK5WS

GE 1/3 HP Motor & Nut - Part# WH03X29559 is a replacement motor and nut for General Electric washing machines. It is a single-phase, permanent split capacitor motor with a rated voltage of 115 volts and a rated frequency of 60 Hz. The motor has an output power of 1/3 horsepower and a speed of 1725...

The GE Ball Joint Upper - Part# WH01X26970 is a replacement part for the upper ball joint on a variety of GE washing machines. This part is made of durable plastic and metal components and is designed to fit into the upper portion of the washing machine's suspension system. The ball joint allows f...

GE BASKET ASM - Part# WH45X26174 is a replacement part for GE washing machines. It is the basket assembly, which includes the inner and outer tubs, agitator, and other components. The basket assembly is responsible for holding the clothes during the wash cycle and agitating them to ensure they are...

The GE Belleville Washer (Part# WH01X26190) is a top-loading washing machine designed to provide superior cleaning performance. It features a stainless steel wash basket, which is designed to resist rust and corrosion, and an extra-large capacity that can accommodate up to 18 pounds of laundry. Th...

GE Belt Drive Part# WH01X27538 is a replacement part for General Electric washing machines. It is a drive belt that connects the motor to the transmission, allowing the motor to turn the transmission and spin the washer tub. The belt is made of rubber and has a length of 42 inches. It also has a w...

GE Button Tree - Part# WH01X24376 is a replacement part for GE washing machines. It is a plastic tree-shaped button that is used to control the various settings on the machine. The button tree has three main branches, each with its own set of buttons. The top branch controls the cycle selection, t...

GE Clamp - Part# WH01X24494 is a clamp used to secure the agitator in place on GE washing machines. It is made of durable plastic and features a unique design that allows it to fit snugly around the agitator, providing a secure hold. The clamp is easy to install and remove, making it an ideal repl...

GE CLIP ANT-SIP Part# WH1X2725 is a clip designed to secure the anti-siphon valve to the wall of a washing machine. The clip is made of durable plastic and is designed to fit most standard anti-siphon valves. The clip helps to keep the valve in place and prevents it from becoming loose or dislodge...

GE Clutch Part# WH05X24185 is a replacement part for GE washing machines. It is a clutch assembly that helps to drive the transmission in the washing machine. The clutch assembly consists of a pulley, a drive belt, and a spring. The pulley is connected to the motor and the drive belt is connected ...

GE Dispenser Asm FSD - Part# WH43X24454 is a part for a GE washing machine. It is the dispenser assembly for the fabric softener dispenser. This part includes the cup, lid, and agitator that dispense fabric softener into the wash cycle. The part number WH43X24454 is used to identify this specific ...

GE Drain Pump Seal - Part# WH08X24179 is a replacement part for GE washing machines. It is a rubber seal that fits around the drain pump and prevents water from leaking out of the machine. The seal helps to keep the machine running efficiently and prevents water damage to the surrounding area. The...

GE Hinge Lid Scr 6-32 Mch F - Part# WH02X24634 is a replacement part for a GE washing machine. It is a hinge lid screw that is used to secure the lid of the washing machine to the cabinet. The screw is 6-32 thread size and has a machined finish. It is made from metal and comes with two nuts and tw...

The GE Internal Drain Hose (Part# WH41X24177) is a replacement part for a variety of GE washing machines. It is used to connect the internal drain pump to the external drain hose. The internal drain hose is made of flexible plastic and measures approximately 4 feet in length. It has an inner diame...

The GE Knob Rotary (Hotpoint) Part# WE03X25286 is a replacement part for Hotpoint ovens. It is a rotary knob that is used to control the temperature of the oven. The knob has a black plastic body with a white indicator line and an arrow pointing to the temperature setting. It also has a chrome-pla...

GE Large Lid Bushing Left - Part# WH02X24388 is a replacement part for GE washing machines. It is a plastic bushing that fits on the left side of the lid and helps to keep it in place. The bushing is designed to fit all GE washers and can be used to replace worn or damaged bushings. This part help...

GE Large Lid White - Part# WH44X24385 is a replacement part for a GE washing machine. It is a white plastic lid that fits over the top of the washer tub. The lid helps to keep the water inside the washer during the wash cycle and also helps to keep dirt and debris out of the washer. This part is m...

GE Lid Lock Bezel (Part# WH01X24381) is a bezel designed to fit around the lid lock on GE washing machines. It is made of durable plastic and is designed to protect the lid lock from dirt, dust, and other debris. The bezel also helps to keep the lid securely closed during the wash cycle. The bezel...

The GE Lid Lock Harness (Part# WH19X24141) is a replacement part for GE washing machines. It is a safety device that prevents the lid from opening while the washer is in use. The harness connects to the lid switch and the main control board, and when the lid is closed, it locks the lid in place un...

The GE Lid Lock Striker (Part# WH02X24399) is a replacement part for General Electric washing machines. It is used to secure the lid of the washing machine in place while it is in use. The striker is made of metal and has a spring-loaded design that allows it to be easily installed and removed. It...

GE NUT HUB (Part# WH02X10363) is a replacement part for GE washing machines. It is a small plastic hub that attaches to the agitator in the washing machine. The nut hub helps to secure the agitator to the drive shaft of the washing machine. It also helps to keep the agitator from wobbling or comin...

GE Panel Rear Control - Part# WH10X28195 is a replacement part for General Electric washing machines. It is a rear control panel that allows the user to control the settings of the washing machine. It includes a knob for selecting the cycle, a knob for selecting the water temperature, and buttons ...

GE Pump Drain Assembly - Part# WH23X28418 is a genuine OEM (Original Equipment Manufacturer) part for General Electric washing machines. This part is used to drain the water from the washer during the spin cycle. It includes a pump, drain hose, and mounting hardware. The pump is made of durable pl...

The GE SCR 1/4-20 2A SINULOC is a self-clinching nut designed for use in thin sheet metal applications. It is made from stainless steel and has a thread size of 1/4-20. The nut has a sinusoidal profile which helps to provide a secure grip on the sheet metal and prevents it from loosening over time...

GE Scr 1/4-20 Tt Hxt .485 S - Part# WH02X24154 is a type of screw manufactured by General Electric. It is a 1/4-20 thread size, hex head, with a .485 inch shank length. The "Tt" stands for "Threaded to the Head", meaning that the threads extend all the way up to the head of the screw. The "Hxt" st...

GE Scr 8-18 Bs Trp 3/8 S - Part# WH02X24296 is a part manufactured by General Electric (GE). It is a screw with an 8-18 thread size, a 3/8 inch shank length, and a slotted head. The part number is WH02X24296. This part is used in various GE appliances such as washers, dryers, refrigerators, and di...

GE Spring Clutch Part# WH01X24434 is a replacement part for GE washing machines. It is a spring-loaded clutch that helps to engage and disengage the transmission from the motor. The clutch helps to prevent damage to the transmission and motor by allowing them to spin at different speeds. This part...

GE Washer Hub (Part# WH02X10364) is a genuine OEM part that is designed for use with GE washing machines. It is a plastic hub that fits onto the drive shaft of the washer and helps to keep the drive belt in place. The hub also helps to reduce noise and vibration during operation. This part is made...

GE Washer Spring - Part# WH01X10759 is a replacement part for GE washing machines. It is a tension spring that helps to keep the lid of the washer closed during operation. The spring is made of metal and has a loop on one end and a hook on the other. It attaches to the lid and the washer frame, pr...

The GE Water Valve Gasket Assembly (Part# WH13X26534) is a replacement part for GE washing machines. It is a rubber gasket that seals the water valve to the washing machine's water inlet hose. The gasket helps to prevent water from leaking out of the valve and into the washer. It also helps to kee...