Model: GUD24ESSM0WW

GE 1/4-20 Taptite Hwh - Part# WH01X10612 is a self-tapping screw manufactured by General Electric. It is made of steel and has a black oxide finish. The screw has a 1/4-inch diameter and 20 threads per inch (TPI). It is designed to be used in applications where the screw needs to be tapped into th...

The GE Actuator Lid (Part# WH43X10057) is a replacement part for GE washing machines. It is a plastic lid that covers the actuator, which is the part of the washing machine that controls the water level and other settings. The lid helps to keep dirt and debris out of the actuator, ensuring that it...

GE Baffle - Part# WE21M39 is a replacement part for GE ovens. It is a metal baffle that helps to evenly distribute heat throughout the oven cavity. The baffle is designed to fit in the back of the oven and has two slots for mounting screws. The baffle helps to reduce hot spots and ensures that foo...

GE Bearing Top - Part# WE03X25099 is a genuine OEM replacement part for GE washing machines. It is a bearing top that helps to support the inner tub of the washing machine. This part is made of durable plastic and is designed to fit perfectly in place, ensuring that the inner tub spins smoothly an...

GE Belt Drive Part# WE12M51 is a belt drive system designed for use in washing machines. It is a direct replacement for the original belt drive system and is designed to provide superior performance and reliability. The belt drive system consists of two components: the motor and the belt. The moto...

GE Belt Drive Part# WE12X27300 is a replacement part for GE washers. It is a drive belt that connects the motor to the transmission. The belt is made of rubber and has a length of 27 inches and a width of 1/2 inch. It is designed to provide reliable power transfer from the motor to the transmissio...

The GE Board & Support Assembly - Part# WH16X27251 is a genuine OEM (Original Equipment Manufacturer) part designed and engineered to exact specifications. It is used in some GE washing machines to provide support for the control board and other components. The assembly includes the board, mountin...

GE Capacitor Part# WH12X27299 is a replacement part for many GE washing machines. It is a dual-run capacitor, which means it has two capacitors in one unit. The first capacitor helps start the motor, while the second capacitor helps keep it running. This part is designed to replace worn out or dam...

GE Clip Front Panel - Part# WE2M301 is a replacement part for a GE dryer. It is the front panel of the dryer that houses the control knobs and buttons. The panel is made of durable plastic and features a clip-on design for easy installation. It includes two mounting screws and is compatible with s...

GE Clip Locking Part# WH01X10595 is a plastic clip used to secure the lid of a washing machine. It is designed to fit GE washing machines and is used to keep the lid closed during operation. The clip is made of durable plastic and features a spring-loaded design that allows it to easily snap into ...

GE Clutch Part# WH05X27185 is a genuine OEM replacement part for General Electric washing machines. It is a direct drive clutch assembly that helps to spin the inner tub of the washer during the spin cycle. The clutch assembly includes a drive pulley, a brake cam, and a drive belt. The clutch help...

GE Door Handle Part# WE1M1068 is a replacement door handle for GE dryers. It is made of plastic and is white in color. The handle measures 4-3/4 inches long and 1-1/2 inches wide. It has two mounting holes that are spaced 2-3/4 inches apart. This handle is used to open and close the dryer door. It...

GE Drain Pump - Part# WH23X26206 is a replacement part for GE washing machines. It is used to pump out the water from the washer during the drain cycle. The pump is made of durable plastic and has a powerful motor that can handle up to 120 gallons of water per minute. It also features an integrate...

The GE GASKET DOOR - Part# WE9M58 is a replacement part for GE ovens. It is a gasket that seals the door of the oven to prevent heat from escaping. The gasket is made of high-temperature silicone and is designed to withstand temperatures up to 500°F (260°C). It has a self-adhesive backing for easy...

The GE GASKET DOOR LOWER - Part# WE9M59 is a replacement part for GE refrigerators. It is a rubber gasket that seals the lower door of the refrigerator to keep cold air in and warm air out. The gasket is made of durable rubber and has a self-adhesive backing for easy installation. The gasket measu...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Clothes Washer Washing Machine LID LOCK - Part# WH44X10288 is a replacement part for washing machines. It is designed to lock the lid of the washing machine in place, preventing it from opening during the wash cycle. The lid lock is made of dur...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Lint Trap Grid Slide Cover - Part# WE1M1001 is a replacement part for your clothes dryer. It is designed to help keep lint and other debris from entering the dryer’s lint trap. The grid slide cover fits over the lint trap and slid...

GE GRID Part# WE01X20427 is a replacement part for a dryer. It is a grid assembly that is used to support the drum in the dryer. The grid assembly helps to keep the drum in place and prevents it from moving around during the drying cycle. The grid assembly also helps to evenly distribute heat thro...

GE Harness Lid Lock - Part# WH19X27244 is a replacement part for GE washing machines. It is a lid lock assembly that helps to keep the lid of the washing machine closed during operation. The part includes the lid lock, harness, and mounting screws. The part is made of plastic and metal materials a...

GE Harness Pump and Hose Pressure Washer Part# WH19X27246 is a replacement part for GE pressure washers. This part includes the pump, hose, and harness assembly. The pump is designed to provide a steady stream of water at high pressure for cleaning surfaces. The hose is made of durable material an...

GE Heater and Housing Assembly (Part# WE11M61) is a replacement part for many GE dryers. It is an assembly that includes the heating element, housing, and thermal fuse. The heating element is a coiled wire that produces heat when electricity passes through it. The housing is a metal box that enclo...

GE Hex Pt Screw K80 X 3.59 - Part# WH01X10616 is a hex head screw manufactured by General Electric (GE). It is made of steel and has a Phillips drive type. The K80 designation indicates that the screw has an 80 degree countersink angle, which is used to create a flush fit when the screw is driven ...

The GE Hinge Washer Cover Lh - Part# WH44X10290 is a replacement part for GE washers. It is the left-hand side cover for the hinge on the washer door. This part is made of durable plastic and helps to keep dirt and debris out of the hinge area. It also helps to keep the door from swinging open too...

GE Hose Drain Assembly (Part# WH41X10281) is a replacement part for GE washing machines. It is a hose assembly that connects the drain pump to the drain hose. The assembly includes a plastic elbow, a rubber gasket, and two clamps. The elbow fits into the drain pump and the gasket seals it against ...

GE Hose Drain Inlet - Part# WH41X10280 is a replacement part for GE washing machines. It is a plastic hose drain inlet that connects the drain hose to the back of the washer. The inlet has two ports, one for the drain hose and one for the water supply line. The inlet also has a check valve to prev...

The GE KIT TRANSMISSION PLATFORM AS - Part# WH49X27322 is a transmission platform assembly for GE washing machines. It is designed to provide a stable and reliable connection between the motor and the transmission, allowing the machine to operate efficiently. The kit includes a drive belt, pulley,...

The GE KIT TRANSMISSION PULLEY NUT - Part# WH49X27323 is a replacement part for a variety of General Electric washing machines. This nut is used to secure the transmission pulley to the drive shaft. It is made of metal and has a hexagonal shape with an internal threading. The nut measures approxim...

The GE Kit Tub 24 Hub Nut Washers & Part# WH49X27328 is a replacement part for washing machines. It is a kit that includes 24 hub nuts, washers, and screws. The hub nuts are used to secure the inner tub to the outer tub of the washing machine. The washers help to provide a secure fit between the h...

The GE KIT WASHER MOTOR AND PULLEY - Part# WH49X27318 is a replacement part for General Electric washing machines. This kit includes a motor, pulley, and belt. The motor is a 1/2 HP, 120V, 60 Hz, 1725 RPM motor that is designed to replace the original motor in your washing machine. The pulley is m...

The GE LEFT SAFETY THERMOSTAT 24" Part# WE4M528 is a thermostat designed to provide safety and energy efficiency in residential and commercial settings. This thermostat is designed to be installed on the left side of the wall, and it features a 24-inch dial that allows for precise temperature cont...

GE Leg Leveling Part# WH01X10594 is a part used to level the legs of a washing machine. It is made of plastic and consists of two parts: a base and a screw. The base has four slots that fit into the four legs of the washing machine, while the screw can be adjusted to raise or lower the height of e...

GE LEG REAR LEVELING - Part# WE01X25234 is a part used in some GE washing machines. It is a rear leveling leg that helps to level the washing machine and keep it stable during operation. The part consists of a metal bracket with two adjustable legs that can be adjusted to the desired height. The l...

The GE Lint Trap Assembly - Part# WE18X20437 is a replacement part for dryers. It is designed to capture lint and other debris that accumulates during the drying process. The assembly includes a lint trap, a lint filter, and a mounting bracket. The lint trap is made of durable plastic and has an e...

GE MAGNET - Part# WH01X10626 is a replacement part for General Electric washing machines. It is a magnet that helps to keep the lid of the washing machine closed during operation. The magnet is made of strong neodymium material and is designed to last for many years. It is an important part of the...

GE Mode Shifter ASM - Part# WH18X27186 is a part used in General Electric washing machines. It is a part of the transmission assembly and is responsible for shifting the machine between different wash cycles. The mode shifter assembly includes a plastic gear, a spring, and a metal arm. The plastic...

GE Motor & Pulley - Part# WE17X22214 is a replacement part for GE washing machines. It is a motor and pulley assembly that helps to drive the agitator in the washing machine. The motor and pulley assembly includes the motor, pulley, belt, and mounting hardware. The motor is a 1/2 HP universal-type...

The GE Motor Pulley & Nut Kit - Part# WH49X27554 is a replacement part for a variety of GE washing machines. It includes a motor pulley, two nuts, and a washer. The motor pulley is used to drive the belt that turns the agitator in the washing machine. The two nuts are used to secure the pulley to ...

GE Nut Speed - Part# WE02X20269 is a replacement part for GE dryers. It is a metal nut that is used to secure the drum belt to the motor pulley. The nut is made of metal and has a 5/16-inch thread size. It is designed to fit specific models of GE dryers, including Hotpoint, RCA, and GE Profile mod...

GE Panel Control and HT Assembl Part# WE20X27260 is a control panel assembly for a GE dryer. It includes the control board, the timer, and the temperature selector switch. The control board is responsible for controlling the operation of the dryer, including setting the cycle time and temperature....

GE Pin Alignment - Part# WH01X10596 is a part used in General Electric (GE) washing machines. It is a pin alignment part that helps to align the drum and the drive shaft of the washing machine. The pin alignment part is made of metal and has two pins that fit into corresponding holes in the drive ...

The GE Press Hose Clamp (Part# WH16X10152) is a stainless steel clamp designed to secure hoses and other flexible tubing to fittings. It is used in a variety of applications, including refrigerators, dishwashers, washing machines, and other household appliances. The clamp features a unique press-f...

GE ROD ASSEMBLY 24" - Part# WH16X27181 is a part used in General Electric washing machines. It is a rod assembly that is 24 inches long and has a part number of WH16X27181. This rod assembly is used to connect the agitator to the transmission in the washing machine. It helps to ensure that the agi...

GE ROD ASSEMBLY 24" - Part# WH16X27182 is a part used in General Electric washing machines. It is a rod assembly that is 24 inches long and has a part number of WH16X27182. This rod assembly is used to connect the inner and outer tubs of the washing machine together. It helps to keep the tubs in p...

GE Scr 8-16 B Flp .525 S Zn - Part# WH01X10631 is a part manufactured by General Electric (GE). It is a self-tapping screw with an 8-16 thread size, a flat head, and a .525 inch shank length. The material is zinc plated steel, which provides corrosion resistance and durability. This part is used t...

GE SCREW - Part# WE2M302 is a type of screw manufactured by General Electric. It is a self-tapping, self-drilling screw designed for use in metal and wood applications. The screw has a #2 Phillips head and is made from steel with a zinc plating for corrosion resistance. The threads are coarse and ...

GE SELECTOR ASM (3S) - Part# WH18X27241 is a part used in washing machines manufactured by General Electric. It is a selector assembly that includes three switches, which are used to control the washing machine's cycle settings. The switches are labeled with the settings for each cycle, such as de...

The GE Speed Sensor, Part# WH12X27187, is a replacement part for GE washing machines. It is a part of the motor control system and is responsible for monitoring the speed of the motor. The speed sensor works by detecting changes in the rotational speed of the motor and sending a signal to the cont...

GE Spring Shifter - Part# WH01X10606 is a replacement part for GE washing machines. It is a small plastic part that helps to shift the drive pulley on the transmission shaft. The spring shifter helps to move the drive pulley back and forth, allowing the transmission to engage and disengage from th...

The GE Start Button Assembly - Part# WE04X27654 is a replacement part for General Electric (GE) dryers. It is a two-piece assembly that includes the start button and the actuator. The start button is used to initiate the dryer cycle, while the actuator is used to engage the drive motor when the st...

GE Timer Part# WE04X22654 is a timer control board for a range of GE dryers. It is used to control the start and stop times of the dryer cycle. The timer is located in the back of the dryer and is connected to the main control board. It has two main functions: controlling the start and stop times ...

GE TRAP DUCT ASM 24" - Part# WE14M190 is a part manufactured by General Electric (GE) for use in dryers. It is a 24-inch trap duct assembly that helps to collect lint and other debris from the dryer exhaust. The part includes a 24-inch long metal duct, two clamps, and two screws. The duct is desig...

The GE Upper Ball Joint - Part# WH16X27178 is a replacement part for a washing machine. It is used to connect the agitator to the transmission in the washer. The ball joint is made of metal and plastic and is designed to provide a secure connection between the two components. It is an OEM (Origina...

GE VALVE 2-1 - Part# WH13X27314 is a two-way water valve manufactured by General Electric. It is used in washing machines to control the flow of water into the machine. The valve has two ports, one for hot water and one for cold water. It is designed to open and close depending on the temperature ...

The GE Water Inlet Assembly - Part# WH13X27418 is a replacement part for General Electric washing machines. It is a complete assembly that includes the water inlet valve, the water inlet hose, and the mounting bracket. The water inlet valve controls the flow of cold and hot water into the washing ...

HINGE - Part# WE1M1033 is a replacement part for a dryer door. It is made of metal and is designed to attach the dryer door to the dryer cabinet. The hinge has two parts, one part attaches to the door and the other part attaches to the cabinet. The hinge allows the door to open and close smoothly....

UI Board GE ASM - Part# WE04X27284 is a user interface board assembly for General Electric (GE) dryers. It is responsible for controlling the operation of the dryer, including the display, timer, and other functions. The UI board is connected to the main control board and receives signals from var...