Model: GTX60EBSJ0WS

GE 3 AB Fuse - Part# WE1X21975 is a three-pole, air-break fuse designed for use in residential and commercial applications. This fuse is rated for up to 600 volts and has a current rating of 30 amps. It is UL listed and CSA certified for safety. The fuse features a dual-element design that provide...

GE Bearing Slide, Part# WE3M51 is a bearing slide designed for use in a variety of applications. It is made from hardened steel and features a ball bearing design that allows for smooth, low-friction movement. The slide has two mounting holes and can be used with either metric or imperial screws. ...

GE Bearing Slide, Part# WE3M52 is a self-lubricating bearing slide designed for use in applications requiring smooth, low friction linear motion. The slide is constructed of high-grade steel and features a hardened steel ball bearing raceway that provides superior wear resistance and low friction ...

GE Bearing Top Asm - Part# WE03X23875 is a replacement part for GE washing machines. It is a top bearing assembly that helps to support the inner tub of the washing machine. The bearing assembly helps to reduce noise and vibration during the spin cycle. It also helps to keep the inner tub in place...

A GE Blower Wheel (Part# WE16X23857) is a fan wheel used in some GE dryers to move air through the dryer. It is made of plastic and is designed to fit into the blower housing of the dryer. The wheel is driven by a motor and spins to create an airflow that helps to circulate air throughout the drye...

GE Diffuser - Part# WE14X20408 is a replacement part for GE dryers. It is a plastic part that fits over the dryer's exhaust vent and helps to evenly distribute the air flow from the dryer. The diffuser helps to reduce noise from the dryer and also helps to prevent lint from escaping into the room....

The GE Drive Belt (Part# WE12X21574) is a replacement part for General Electric dryers. It is a single-groove, 5-rib belt that measures approximately 93 1/2 inches in length and 1/4 inch in width. This belt is used to connect the motor to the drum of the dryer, allowing it to rotate and tumble the...

GE Dryer Baffle Part# WE14X20683 is a replacement part for GE dryers. It is a baffle that helps to direct the air flow in the dryer drum. The baffle helps to ensure that the clothes are evenly dried and prevents them from bunching up in one area of the drum. The baffle also helps to reduce noise a...

The GE Dryer Heater Element with Mica (Part# WE11M10001) is a replacement part for many GE dryers. It is the component responsible for heating the air that passes through the dryer drum. The element is made of a metal coil surrounded by mica insulation. The mica helps to protect the element from d...

GE FUSE HOLDER 3AB - Part# WE1X21955 is a fuse holder designed for use with 3AB fuses. It is a single-pole, non-indicating fuse holder that is UL listed and CSA certified. The holder has a voltage rating of 600VAC/250VDC and an interrupt rating of 10kA. It features a thermoplastic body with an int...

GE Gasket (Seal) 39 Inch - Part# WE1M825 is a replacement part for GE dryers. It is a 39-inch long gasket that seals the door of the dryer to prevent heat and moisture from escaping. The gasket is made of durable rubber and is designed to last for years. It is easy to install and comes with detail...

The GE IDLER ARM - Part# WE03X20434 is a part used in many GE dryers. It is a metal arm that connects the drive belt to the drum of the dryer. The idler arm helps to keep tension on the drive belt, which allows the drum to rotate and turn the clothes inside. The idler arm also helps to reduce nois...

GE Levelling Foot Part# WE1M1101 is a heavy-duty adjustable foot designed to provide a stable and level base for large appliances. It is made of durable steel and features a wide base that helps distribute the weight of the appliance evenly across the floor. The foot has an adjustable height range...

The GE Lint Filter (Part# WE03X23881) is a replacement lint filter for GE dryers. It is designed to capture lint, dust, and other debris from the air that passes through the dryer during the drying cycle. The filter is made of a durable plastic material and has a mesh screen on one side to help ca...

The GE Outlet Control Thermistor (Part# WE4M448) is a temperature sensing device used to control the temperature of an outlet. It is designed to be used with a compatible GE thermostat and can be used to control the temperature of an outlet, such as a refrigerator or air conditioner. The thermisto...