Model: GTW750CPL0DG

The GE 1/2 HP MOTOR AND NUT - Part# WH49X25375 is a motor and nut assembly designed for use with various GE washing machines. The motor is a 1/2 horsepower, 120 volt, 60 Hz, single-phase induction motor with a maximum speed of 1725 RPM. The nut is a plastic nut that secures the motor to the washin...

The GE Ball Joint Upper - Part# WH01X26970 is a replacement part for the upper ball joint on a variety of GE washing machines. This part is made of durable plastic and metal components and is designed to fit into the upper portion of the washing machine's suspension system. The ball joint allows f...

The GE Belleville Washer (Part# WH01X26190) is a top-loading washing machine designed to provide superior cleaning performance. It features a stainless steel wash basket, which is designed to resist rust and corrosion, and an extra-large capacity that can accommodate up to 18 pounds of laundry. Th...

GE Clamp - Part# WH01X24494 is a clamp used to secure the agitator in place on GE washing machines. It is made of durable plastic and features a unique design that allows it to fit snugly around the agitator, providing a secure hold. The clamp is easy to install and remove, making it an ideal repl...

GE CLIP ANT-SIP Part# WH1X2725 is a clip designed to secure the anti-siphon valve to the wall of a washing machine. The clip is made of durable plastic and is designed to fit most standard anti-siphon valves. The clip helps to keep the valve in place and prevents it from becoming loose or dislodge...

GE Clutch Part# WH05X24185 is a replacement part for GE washing machines. It is a clutch assembly that helps to drive the transmission in the washing machine. The clutch assembly consists of a pulley, a drive belt, and a spring. The pulley is connected to the motor and the drive belt is connected ...

GE Drain Pump Seal - Part# WH08X24179 is a replacement part for GE washing machines. It is a rubber seal that fits around the drain pump and prevents water from leaking out of the machine. The seal helps to keep the machine running efficiently and prevents water damage to the surrounding area. The...

The GE Drive Belt (Part# WH01X24180) is a replacement part for General Electric washing machines. It is a flat, flexible belt that connects the motor to the transmission and helps to spin the drum during the wash cycle. The belt is made of rubber and has teeth on one side that grip onto the pulley...

GE Harness Main Blue - Part# WH19X27498 is a replacement part for General Electric washing machines. It is a wiring harness that connects the main control board to the various components of the washing machine. This part is used to replace a damaged or faulty wiring harness, and it helps ensure th...

The GE Internal Drain Hose (Part# WH41X24177) is a replacement part for a variety of GE washing machines. It is used to connect the internal drain pump to the external drain hose. The internal drain hose is made of flexible plastic and measures approximately 4 feet in length. It has an inner diame...

GE Lid Hinge - Part# WH02X24139 is a replacement part for GE washing machines. It is a metal hinge that attaches the lid of the washing machine to the body of the machine. The hinge is made of metal and has two mounting holes for attaching it to the machine. It also has a spring-loaded pin that al...

The GE Lid Lock Harness (Part# WH19X24141) is a replacement part for GE washing machines. It is a safety device that prevents the lid from opening while the washer is in use. The harness connects to the lid switch and the main control board, and when the lid is closed, it locks the lid in place un...

GE Lid Lock Striker is a part used in some GE washing machines. It is a metal piece that is used to secure the lid of the washing machine when it is closed. The striker is attached to the lid and engages with a latch on the washer's cabinet when the lid is closed. This prevents the lid from openin...

GE NUT HUB (Part# WH02X10363) is a replacement part for GE washing machines. It is a small plastic hub that attaches to the agitator in the washing machine. The nut hub helps to secure the agitator to the drive shaft of the washing machine. It also helps to keep the agitator from wobbling or comin...

The GE SCR 1/4-20 2A SINULOC is a self-clinching nut designed for use in thin sheet metal applications. It is made from stainless steel and has a thread size of 1/4-20. The nut has a sinusoidal profile which helps to provide a secure grip on the sheet metal and prevents it from loosening over time...

GE Scr 1/4-20 Tt Hxt .485 S - Part# WH02X24154 is a type of screw manufactured by General Electric. It is a 1/4-20 thread size, hex head, with a .485 inch shank length. The "Tt" stands for "Threaded to the Head", meaning that the threads extend all the way up to the head of the screw. The "Hxt" st...

GE Spring Clutch Part# WH01X24434 is a replacement part for GE washing machines. It is a spring-loaded clutch that helps to engage and disengage the transmission from the motor. The clutch helps to prevent damage to the transmission and motor by allowing them to spin at different speeds. This part...

GE Valve Quad Water Asm - Part# WH13X26637 is a replacement part for General Electric washing machines. It is a four-way water valve assembly that controls the flow of water into the washer. It has four ports, two for hot and cold water inlet, one for the drain hose, and one for the pressure switc...

GE Washer Hub (Part# WH02X10364) is a genuine OEM part that is designed for use with GE washing machines. It is a plastic hub that fits onto the drive shaft of the washer and helps to keep the drive belt in place. The hub also helps to reduce noise and vibration during operation. This part is made...

GE Washer Spring - Part# WH01X10759 is a replacement part for GE washing machines. It is a tension spring that helps to keep the lid of the washer closed during operation. The spring is made of metal and has a loop on one end and a hook on the other. It attaches to the lid and the washer frame, pr...

The GE Water Valve Seal - Part# WH13X24094 is a replacement part for a variety of GE washing machines. It is designed to provide a watertight seal between the water inlet valve and the washing machine tub. The seal helps to prevent water from leaking out of the washing machine during operation. Th...