Model: GTUP240EM1WW

GE 1/4-20 Taptite Hwh - Part# WH01X10612 is a self-tapping screw manufactured by General Electric. It is made of steel and has a black oxide finish. The screw has a 1/4-inch diameter and 20 threads per inch (TPI). It is designed to be used in applications where the screw needs to be tapped into th...

The GE Actuator Lid (Part# WH43X10057) is a replacement part for GE washing machines. It is a plastic lid that covers the actuator, which is the part of the washing machine that controls the water level and other settings. The lid helps to keep dirt and debris out of the actuator, ensuring that it...

GE Agitator - Part# WH43X10056 is a replacement agitator for GE washing machines. It is designed to replace the original agitator in GE washers and is made of durable plastic. The agitator has a unique design that helps to evenly distribute the laundry load during the wash cycle, ensuring that all...

GE Baffle - Part# WE21M39 is a replacement part for GE ovens. It is a metal baffle that helps to evenly distribute heat throughout the oven cavity. The baffle is designed to fit in the back of the oven and has two slots for mounting screws. The baffle helps to reduce hot spots and ensures that foo...

GE Basket Assy 24" - Part# WH45X10107 is a replacement part for a GE washing machine. It is the basket assembly, which includes the basket, agitator, and mounting hardware. The basket is made of durable plastic and measures 24 inches in diameter. The agitator is designed to move the clothes around...

GE Bearing Slide, Part# WE3M51 is a bearing slide designed for use in a variety of applications. It is made from hardened steel and features a ball bearing design that allows for smooth, low-friction movement. The slide has two mounting holes and can be used with either metric or imperial screws. ...

GE Bearing Slide, Part# WE3M52 is a self-lubricating bearing slide designed for use in applications requiring smooth, low friction linear motion. The slide is constructed of high-grade steel and features a hardened steel ball bearing raceway that provides superior wear resistance and low friction ...

GE Belt Drive Part# WE12M51 is a belt drive system designed for use in washing machines. It is a direct replacement for the original belt drive system and is designed to provide superior performance and reliability. The belt drive system consists of two components: the motor and the belt. The moto...

A GE Blower Wheel (Part# WE16X20393) is a fan wheel used in some GE dryers to circulate air throughout the dryer drum. The blower wheel is made of plastic and has a diameter of approximately 16 inches. It is connected to the motor shaft via a set screw and is responsible for pushing air through th...

The GE Button Selector - Part# WH01X10591 is a replacement part for GE washing machines. It is a selector switch that allows the user to choose between different wash cycles. The switch has five positions: Off, Normal, Delicate, Permanent Press, and Heavy Duty. It also has a lighted indicator to s...

The GE Clip Capacitor - Part# WH01X10601 is a part used in many GE washing machines. It is a small, plastic-encased capacitor that helps regulate the electrical current in the machine. The capacitor helps to ensure that the motor runs smoothly and efficiently. It also helps to reduce noise and vib...

GE Clip Front Panel - Part# WE2M301 is a replacement part for a GE dryer. It is the front panel of the dryer that houses the control knobs and buttons. The panel is made of durable plastic and features a clip-on design for easy installation. It includes two mounting screws and is compatible with s...

GE Clip Locking Part# WH01X10595 is a plastic clip used to secure the lid of a washing machine. It is designed to fit GE washing machines and is used to keep the lid closed during operation. The clip is made of durable plastic and features a spring-loaded design that allows it to easily snap into ...

GE Door Handle Part# WE1M1068 is a replacement door handle for GE dryers. It is made of plastic and is white in color. The handle measures 4-3/4 inches long and 1-1/2 inches wide. It has two mounting holes that are spaced 2-3/4 inches apart. This handle is used to open and close the dryer door. It...

GE DRIVE 3L (Part# WH01X20436) is a three-phase, variable frequency drive (VFD) designed for use with three-phase induction motors. It is used to control the speed and torque of the motor, as well as provide protection against overloads and short circuits. The drive features a digital display that...

GE Elbow Over Flow - Part# WH01X10605 is a part used in washing machines. It is a plastic elbow that connects the water inlet valve to the water overflow tube. This part helps to prevent water from overflowing from the washer during the fill cycle. The elbow also helps to keep the water pressure b...

GE ELEC. PRSSURE SWITCH - Part# WH12X10511 is a pressure switch designed to be used in a variety of appliances, such as washing machines, dishwashers, and refrigerators. This pressure switch is designed to detect changes in water pressure and activate the motor when the water pressure reaches a ce...

GE Ens. Tornillo Agitador - Part# WH01X10619 is a replacement agitator screw assembly for GE washing machines. This part is used to secure the agitator to the transmission shaft and keep it from wobbling or moving around during the wash cycle. The agitator screw assembly includes a plastic washer,...

GE FELT TRAP DUCT (Part# WE1M997) is a part used in dryers to help trap lint and other debris. It is made of felt material and is designed to fit around the dryer’s exhaust vent. The felt material helps to trap lint and other debris that can accumulate in the dryer’s exhaust vent, which can cause ...

GE Fork Support ASM - Part# WH16X10147 is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with General Electric washing machines. This part is used to support the drive fork on the transmission. It helps to keep the drive fork in place and prevent it from slipping out...

The GE Funnel Shower Head (Part# WH13X10051) is a high-performance shower head designed to provide a powerful and invigorating shower experience. It features a unique funnel-shaped design that helps to concentrate the water flow for maximum coverage and pressure. The shower head also has an adjust...

The GE GASKET DOOR - Part# WE9M58 is a replacement part for GE ovens. It is a gasket that seals the door of the oven to prevent heat from escaping. The gasket is made of high-temperature silicone and is designed to withstand temperatures up to 500°F (260°C). It has a self-adhesive backing for easy...

The GE GASKET DOOR LOWER - Part# WE9M59 is a replacement part for GE refrigerators. It is a rubber gasket that seals the lower door of the refrigerator to keep cold air in and warm air out. The gasket is made of durable rubber and has a self-adhesive backing for easy installation. The gasket measu...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Clothes Washer Washing Machine LID LOCK - Part# WH44X10288 is a replacement part for washing machines. It is designed to lock the lid of the washing machine in place, preventing it from opening during the wash cycle. The lid lock is made of dur...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer 30 Amp 120V FUSE - Part# WE1M1002 is a replacement fuse for clothes dryers. It is designed to protect the dryer from overloading and short-circuiting. The fuse is rated at 30 amps and 120 volts, and it has a push-to-reset feature ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Lint Trap Grid Slide Cover - Part# WE1M1001 is a replacement part for your clothes dryer. It is designed to help keep lint and other debris from entering the dryer’s lint trap. The grid slide cover fits over the lint trap and slid...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Push to Start Switch (Part# WE4M416) is a replacement part for many different models of clothes dryers. This switch is used to start the dryer when the door is closed and the start button is pressed. The switch has two terminals a...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Timer Control Knob - Part# WE4M522 is a replacement part for dryers. It is used to control the amount of time that the dryer runs. The knob has four settings: Off, Low Heat, Medium Heat, and High Heat. The timer knob can be turned...

GE GRID Part# WE01X20427 is a replacement part for a dryer. It is a grid assembly that is used to support the drum in the dryer. The grid assembly helps to keep the drum in place and prevents it from moving around during the drying cycle. The grid assembly also helps to evenly distribute heat thro...

The GE Grommet Motor - Part# WH03X20508 is a motor used in many GE washing machines. It is a universal motor that can be used in both top-load and front-load washers. The motor is designed to provide reliable performance and long life. It features a heavy-duty construction with sealed bearings for...

GE HARNESS UI ASM - Part# WE26M362 is a user interface assembly manufactured by General Electric. It is designed to provide a user-friendly interface for controlling and monitoring various electrical systems. The assembly includes a control panel, a display, and various buttons and switches. The c...

GE Heater and Housing Assembly (Part# WE11M61) is a replacement part for many GE dryers. It is an assembly that includes the heating element, housing, and thermal fuse. The heating element is a coiled wire that produces heat when electricity passes through it. The housing is a metal box that enclo...

GE Hex Pt Screw K80 X 3.59 - Part# WH01X10616 is a hex head screw manufactured by General Electric (GE). It is made of steel and has a Phillips drive type. The K80 designation indicates that the screw has an 80 degree countersink angle, which is used to create a flush fit when the screw is driven ...

The GE Hinge Washer Cover Lh - Part# WH44X10290 is a replacement part for GE washers. It is the left-hand side cover for the hinge on the washer door. This part is made of durable plastic and helps to keep dirt and debris out of the hinge area. It also helps to keep the door from swinging open too...

GE Holder Fuse, Part# WE1M1003 is a fuse holder designed to accept a 1/4" x 1-1/4" (6.35mm x 31.75mm) fuse. It is made of high-impact thermoplastic and features a hinged cover with a locking tab for secure installation. The holder has two mounting holes for easy installation and is UL listed for s...

GE Hose Drain Assembly (Part# WH41X10281) is a replacement part for GE washing machines. It is a hose assembly that connects the drain pump to the drain hose. The assembly includes a plastic elbow, a rubber gasket, and two clamps. The elbow fits into the drain pump and the gasket seals it against ...

GE Hose Drain Inlet - Part# WH41X10280 is a replacement part for GE washing machines. It is a plastic hose drain inlet that connects the drain hose to the back of the washer. The inlet has two ports, one for the drain hose and one for the water supply line. The inlet also has a check valve to prev...

The GE IDLER ARM ASM - Part# WE12M50 is a replacement part for a variety of General Electric (GE) appliances. It is an idler arm assembly that helps to support the belt and pulley system in many GE washing machines. The idler arm assembly includes the idler arm, tension spring, and mounting bracke...

The GE LEFT SAFETY THERMOSTAT 24" Part# WE4M528 is a thermostat designed to provide safety and energy efficiency in residential and commercial settings. This thermostat is designed to be installed on the left side of the wall, and it features a 24-inch dial that allows for precise temperature cont...

GE Leg Leveling Part# WH01X10594 is a part used to level the legs of a washing machine. It is made of plastic and consists of two parts: a base and a screw. The base has four slots that fit into the four legs of the washing machine, while the screw can be adjusted to raise or lower the height of e...

The GE Lint Trap Assembly - Part# WE18X20437 is a replacement part for dryers. It is designed to capture lint and other debris that accumulates during the drying process. The assembly includes a lint trap, a lint filter, and a mounting bracket. The lint trap is made of durable plastic and has an e...

GE MAGNET - Part# WH01X10626 is a replacement part for General Electric washing machines. It is a magnet that helps to keep the lid of the washing machine closed during operation. The magnet is made of strong neodymium material and is designed to last for many years. It is an important part of the...

GE NUT HUB (Part# WH01X10618) is a genuine OEM part used in many GE washers. It is a plastic hub that holds the agitator in place. The hub is located at the top of the agitator and is secured with a nut. This part helps to keep the agitator from wobbling or moving around during operation. It also ...

GE NUT PULLEY - Part# WH01X10611 is a replacement part for GE washing machines. It is a plastic pulley with a metal nut attached to it. The pulley is used to drive the belt that turns the agitator in the washer. The nut on the pulley is used to secure the belt in place. This part is made of durabl...

GE Nut Speed - Part# WE02X20269 is a replacement part for GE dryers. It is a metal nut that is used to secure the drum belt to the motor pulley. The nut is made of metal and has a 5/16-inch thread size. It is designed to fit specific models of GE dryers, including Hotpoint, RCA, and GE Profile mod...

GE Panel Ctrl & Heat Tr Asm - Part# WE19M1697 is a replacement part for GE dryers. It is the control panel and heating element assembly for the dryer. The control panel houses the electronic components that control the operation of the dryer, including the timer, temperature settings, and other se...

GE Pin Alignment - Part# WH01X10596 is a part used in General Electric (GE) washing machines. It is a pin alignment part that helps to align the drum and the drive shaft of the washing machine. The pin alignment part is made of metal and has two pins that fit into corresponding holes in the drive ...

The GE Press Hose Clamp (Part# WH16X10152) is a stainless steel clamp designed to secure hoses and other flexible tubing to fittings. It is used in a variety of applications, including refrigerators, dishwashers, washing machines, and other household appliances. The clamp features a unique press-f...

GE Pump Drain Part# WH23X10040 is a replacement part for GE washing machines. It is a pump drain that helps to remove water from the washer during the draining cycle. The pump drain is made of durable plastic and features a 1/4 inch outlet hose connection. It also includes an inlet filter to help ...

GE ROD ASSEMBLY FRONT - Part# WH16X10148 is a part used in GE washing machines. It is a replacement part for the front rod assembly and is used to secure the agitator to the transmission. The rod assembly consists of two rods, one with a square end and one with a round end, which are connected by ...

The GE ROD ASSEMBLY REAR - Part# WH16X10149 is a replacement part for a washing machine. It is a rear rod assembly that helps to support the rear of the washer tub. This part is made of metal and plastic and includes two rods, two bushings, and two washers. The rods are used to attach the rear of ...

GE Scr 8-16 B Flp .525 S Zn - Part# WH01X10631 is a part manufactured by General Electric (GE). It is a self-tapping screw with an 8-16 thread size, a flat head, and a .525 inch shank length. The material is zinc plated steel, which provides corrosion resistance and durability. This part is used t...

GE SCREW - Part# WE2M302 is a type of screw manufactured by General Electric. It is a self-tapping, self-drilling screw designed for use in metal and wood applications. The screw has a #2 Phillips head and is made from steel with a zinc plating for corrosion resistance. The threads are coarse and ...

GE Screw - Part# WH2X1217 is a self-tapping screw manufactured by General Electric. It is made of steel and has a zinc plated finish. The screw has a #8-32 thread size and is 1/2 inch long. It is designed for use in applications such as attaching drywall, plywood, and other materials to wood or me...

GE Set Screw Pulley M. Assy - Part# WH01X10609 is a replacement part for GE washing machines. It is a pulley assembly that is used to drive the belt that turns the agitator in the washer. The pulley assembly consists of a plastic pulley, a metal hub, and two set screws. The plastic pulley has an i...

GE Shaft & Bracket Assembly (Part# WE3M33) is a replacement part for General Electric dryers. It is a metal assembly that includes a shaft, bracket, and screws. The shaft is used to attach the drum to the motor and the bracket is used to secure the drum in place. The screws are used to secure the ...

The GE Shifter Hub (Part# WH01X10607) is a replacement part for a variety of GE washing machines. It is a plastic part that connects the shifter lever to the transmission. The shifter hub is responsible for controlling the direction of the agitator in the washer. It also helps to ensure that the w...

GE Socket Rod Support - Part# WH01X10620 is a part used in many GE washing machines. It is a metal rod that supports the agitator in the washer tub. The rod is inserted into the socket on the bottom of the agitator and held in place with a clip. This part helps to keep the agitator from moving aro...

GE Spring Shifter - Part# WH01X10606 is a replacement part for GE washing machines. It is a small plastic part that helps to shift the drive pulley on the transmission shaft. The spring shifter helps to move the drive pulley back and forth, allowing the transmission to engage and disengage from th...

The GE Support Sensor Board - Part# WH12X20439 is a replacement part for General Electric washing machines. It is a circuit board that is responsible for controlling the water level, temperature, and spin speed of the washer. The board contains several sensors that detect the water level, temperat...

GE Supports Assembly - Part# WH16X10145 is a part used in washing machines. It is a support assembly that helps to keep the washer tub stable and secure during operation. The assembly includes two support brackets, four screws, and a plastic bushing. The brackets are made of metal and attach to th...

GE Switch Interlock Part# WD21X10261 is a safety switch designed to prevent the opening of a dishwasher door while the dishwasher is in operation. The switch works by sensing when the door is opened and then automatically shutting off power to the dishwasher. This prevents any potential accidents ...

GE Switch Selector - Part# WH12X10509 is a replacement part for General Electric washing machines. It is a selector switch that allows the user to choose between different wash cycles and settings. The switch has four positions: Off, Normal, Permanent Press, and Delicate. It also has a knob that c...

GE Switch Selector - Part# WH12X10510 is a replacement part for General Electric washing machines. It is a selector switch that controls the water level, wash cycle, and spin speed of the machine. The switch has three positions: low, medium, and high. It is made of durable plastic and metal compon...

GE THERMISTOR ASM - Part# WH12X10512 is a thermistor assembly made by General Electric (GE). It is a temperature sensing device that is used in many of GE's appliances, such as washing machines, dryers, and refrigerators. The thermistor assembly consists of a thermistor element, which is a tempera...

GE Transmission Pulley - Part# WH38X10018 is a replacement part for GE washing machines. It is a metal pulley that connects the motor to the transmission, allowing the motor to turn the transmission and agitate the clothes in the washer. The pulley is made of durable metal and has a 5/16" bore wit...

GE TRAP DUCT ASM 24" - Part# WE14M190 is a part manufactured by General Electric (GE) for use in dryers. It is a 24-inch trap duct assembly that helps to collect lint and other debris from the dryer exhaust. The part includes a 24-inch long metal duct, two clamps, and two screws. The duct is desig...

GE Tub 24" (Drop Ship) - Part# WH45X10150 is a replacement part for a washing machine. It is a plastic tub that fits inside the washer and holds the clothes during the wash cycle. The tub is 24 inches in diameter and is made of durable plastic. It has an integrated drain port for easy draining of ...

The GE Tub Cover Asm 24" - Part# WH44X10281 is a replacement part for a washing machine. It is a tub cover assembly that fits on the top of the washing machine tub. The part includes the cover, screws, and gasket. The cover helps to keep the clothes inside the tub during the wash cycle and also he...

The GE Tub Strap Assembly - Part# WH01X20438 is a replacement part for GE washing machines. It is used to secure the outer tub to the cabinet of the washing machine. The assembly includes two straps, four screws, and two nuts. The straps are made of metal and have a black finish. The screws and nu...

GE Washer Hub Part# WH01X10617 is a replacement part for GE washing machines. It is a plastic hub that fits onto the drive shaft of the washer and connects to the agitator. The hub helps to keep the agitator in place and prevents it from wobbling or coming loose during operation. The hub also help...

The GE Water Valve - Part# WH13X10050 is a replacement part for General Electric washing machines. It is a dual-solvent water valve that controls the flow of hot and cold water into the washer. The valve has two inlet ports and two outlet ports, one for hot water and one for cold water. The valve ...

HINGE - Part# WE1M1033 is a replacement part for a dryer door. It is made of metal and is designed to attach the dryer door to the dryer cabinet. The hinge has two parts, one part attaches to the door and the other part attaches to the cabinet. The hinge allows the door to open and close smoothly....