Model: GTUN275GM1WW

GE 1/4-20 Taptite Hwh - Part# WH01X10612 is a self-tapping screw manufactured by General Electric. It is made of steel and has a black oxide finish. The screw has a 1/4-inch diameter and 20 threads per inch (TPI). It is designed to be used in applications where the screw needs to be tapped into th...

The GE Actuator Lid (Part# WH43X10057) is a replacement part for GE washing machines. It is a plastic lid that covers the actuator, which is the part of the washing machine that controls the water level and other settings. The lid helps to keep dirt and debris out of the actuator, ensuring that it...

GE Agitator - Part# WH43X10056 is a replacement agitator for GE washing machines. It is designed to replace the original agitator in GE washers and is made of durable plastic. The agitator has a unique design that helps to evenly distribute the laundry load during the wash cycle, ensuring that all...

GE Baffle - Part# WE21M39 is a replacement part for GE ovens. It is a metal baffle that helps to evenly distribute heat throughout the oven cavity. The baffle is designed to fit in the back of the oven and has two slots for mounting screws. The baffle helps to reduce hot spots and ensures that foo...

GE Board Control ASM - Part# WH18X10002 is a replacement part for GE washing machines. It is a control board assembly that helps to regulate the various functions of the washing machine, such as water level, temperature, spin speed, and cycle selection. The board also contains a timer that allows ...

The GE Button Selector - Part# WH01X10591 is a replacement part for GE washing machines. It is a selector switch that allows the user to choose between different wash cycles. The switch has five positions: Off, Normal, Delicate, Permanent Press, and Heavy Duty. It also has a lighted indicator to s...

The GE Clip Capacitor - Part# WH01X10601 is a part used in many GE washing machines. It is a small, plastic-encased capacitor that helps regulate the electrical current in the machine. The capacitor helps to ensure that the motor runs smoothly and efficiently. It also helps to reduce noise and vib...

GE Clip Front Panel - Part# WE2M301 is a replacement part for a GE dryer. It is the front panel of the dryer that houses the control knobs and buttons. The panel is made of durable plastic and features a clip-on design for easy installation. It includes two mounting screws and is compatible with s...

GE Clip Locking Part# WH01X10595 is a plastic clip used to secure the lid of a washing machine. It is designed to fit GE washing machines and is used to keep the lid closed during operation. The clip is made of durable plastic and features a spring-loaded design that allows it to easily snap into ...

GE COVER TOP - Part# WH44X10282 is a replacement part for GE washing machines. It is the top cover of the washing machine, which is made of durable plastic and designed to protect the internal components from dust and debris. The cover also helps to keep the washer running smoothly by preventing f...

GE Door Handle Part# WE1M1068 is a replacement door handle for GE dryers. It is made of plastic and is white in color. The handle measures 4-3/4 inches long and 1-1/2 inches wide. It has two mounting holes that are spaced 2-3/4 inches apart. This handle is used to open and close the dryer door. It...

GE DRIVE 3L (Part# WH01X20436) is a three-phase, variable frequency drive (VFD) designed for use with three-phase induction motors. It is used to control the speed and torque of the motor, as well as provide protection against overloads and short circuits. The drive features a digital display that...

GE DRUM ASM 27" - Part# WE21M41 is a General Electric dryer drum assembly. It is a replacement part for many GE dryers and is designed to replace the original drum assembly in the dryer. The drum assembly includes the drum, felt seal, bearing kit, and belt. The drum is made of steel and has a diam...

GE Elbow Over Flow - Part# WH01X10605 is a part used in washing machines. It is a plastic elbow that connects the water inlet valve to the water overflow tube. This part helps to prevent water from overflowing from the washer during the fill cycle. The elbow also helps to keep the water pressure b...

The GE Enclosure Board - Part# WE19M1773 is a replacement part for a variety of GE electric ranges. It is an electronic control board that houses the various components of the range, including the oven temperature sensor, clock, timer, and other controls. The board also contains a fuse that protec...

GE Ens. Tornillo Agitador - Part# WH01X10619 is a replacement agitator screw assembly for GE washing machines. This part is used to secure the agitator to the transmission shaft and keep it from wobbling or moving around during the wash cycle. The agitator screw assembly includes a plastic washer,...

GE FELT TRAP DUCT (Part# WE1M997) is a part used in dryers to help trap lint and other debris. It is made of felt material and is designed to fit around the dryer’s exhaust vent. The felt material helps to trap lint and other debris that can accumulate in the dryer’s exhaust vent, which can cause ...

GE Fork Support ASM - Part# WH16X10147 is a genuine OEM (Original Equipment Manufacturer) part that is designed for use with General Electric washing machines. This part is used to support the drive fork on the transmission. It helps to keep the drive fork in place and prevent it from slipping out...

The GE GAS CONVERSION KIT - Part# WE25M74 is a kit designed to convert a gas dryer from natural gas to liquid propane. The kit includes all the necessary components to make the conversion, including a new LP orifice, an LP regulator, and an LP hose. The kit also includes detailed instructions for ...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Clothes Washer Washing Machine LID LOCK - Part# WH44X10288 is a replacement part for washing machines. It is designed to lock the lid of the washing machine in place, preventing it from opening during the wash cycle. The lid lock is made of dur...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Clothes Washer Washing Machine TUB COVER ASM 27" - Part# WH44X10286 is a replacement part for washing machines. It is a tub cover assembly that measures 27 inches in diameter and is made of durable plastic. This part is designed to fit specific...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer 30 Amp 120V FUSE - Part# WE1M1002 is a replacement fuse for clothes dryers. It is designed to protect the dryer from overloading and short-circuiting. The fuse is rated at 30 amps and 120 volts, and it has a push-to-reset feature ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer DRIVE MOTOR WITH PULLEY - Part# WE17M66 is a replacement part for a clothes dryer. It is the motor that powers the drum of the dryer, which rotates to tumble and dry the clothes. The motor is connected to a pulley, which helps to ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Gas Igniter Part# WE4X739 is a replacement part for gas dryers. It is used to ignite the gas in the dryer to create heat. The igniter is made of a ceramic material and has two metal contacts that are connected to the gas valve. Wh...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Push to Start Switch (Part# WE4M416) is a replacement part for many different models of clothes dryers. This switch is used to start the dryer when the door is closed and the start button is pressed. The switch has two terminals a...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Timer Control Knob - Part# WE4M522 is a replacement part for dryers. It is used to control the amount of time that the dryer runs. The knob has four settings: Off, Low Heat, Medium Heat, and High Heat. The timer knob can be turned...

The GE Grommet Motor - Part# WH03X20508 is a motor used in many GE washing machines. It is a universal motor that can be used in both top-load and front-load washers. The motor is designed to provide reliable performance and long life. It features a heavy-duty construction with sealed bearings for...

GE Harness Door Asm - Part# WE26M361 is a replacement part for GE dishwashers. It is a door harness assembly that connects the door to the control board. The harness includes a power cord, two wires, and a connector. This part is used to provide power to the dishwasher's control board and allow it...

GE Harness Selector - Part# WH19X10081 is a replacement part for select GE washing machines. It is a wiring harness that connects the electronic control board to the motor and other components in the washer. The harness includes a 6-pin connector, 4-pin connector, and 2-pin connector. This part is...

GE Hex Pt Screw K80 X 3.59 - Part# WH01X10616 is a hex head screw manufactured by General Electric (GE). It is made of steel and has a Phillips drive type. The K80 designation indicates that the screw has an 80 degree countersink angle, which is used to create a flush fit when the screw is driven ...

The GE Hinge Washer Cover Lh - Part# WH44X10290 is a replacement part for GE washers. It is the left-hand side cover for the hinge on the washer door. This part is made of durable plastic and helps to keep dirt and debris out of the hinge area. It also helps to keep the door from swinging open too...

GE Holder Fuse, Part# WE1M1003 is a fuse holder designed to accept a 1/4" x 1-1/4" (6.35mm x 31.75mm) fuse. It is made of high-impact thermoplastic and features a hinged cover with a locking tab for secure installation. The holder has two mounting holes for easy installation and is UL listed for s...

GE Hose Drain Assembly (Part# WH41X10281) is a replacement part for GE washing machines. It is a hose assembly that connects the drain pump to the drain hose. The assembly includes a plastic elbow, a rubber gasket, and two clamps. The elbow fits into the drain pump and the gasket seals it against ...

GE Hose Drain Inlet - Part# WH41X10280 is a replacement part for GE washing machines. It is a plastic hose drain inlet that connects the drain hose to the back of the washer. The inlet has two ports, one for the drain hose and one for the water supply line. The inlet also has a check valve to prev...

The GE IDLER ARM ASM - Part# WE12M50 is a replacement part for a variety of General Electric (GE) appliances. It is an idler arm assembly that helps to support the belt and pulley system in many GE washing machines. The idler arm assembly includes the idler arm, tension spring, and mounting bracke...

The GE KIT GAS CONVERSION 24" - Part# WE25M73 is a conversion kit designed to convert a gas dryer from natural gas to liquid propane. The kit includes the necessary parts and instructions for the conversion, including a new LP orifice, an LP regulator, and a flexible gas connector. The kit also in...

The GE LEFT SAFETY THERMOSTAT 24" Part# WE4M528 is a thermostat designed to provide safety and energy efficiency in residential and commercial settings. This thermostat is designed to be installed on the left side of the wall, and it features a 24-inch dial that allows for precise temperature cont...

GE Leg Leveling Part# WH01X10594 is a part used to level the legs of a washing machine. It is made of plastic and consists of two parts: a base and a screw. The base has four slots that fit into the four legs of the washing machine, while the screw can be adjusted to raise or lower the height of e...

GE MAGNET - Part# WH01X10626 is a replacement part for General Electric washing machines. It is a magnet that helps to keep the lid of the washing machine closed during operation. The magnet is made of strong neodymium material and is designed to last for many years. It is an important part of the...

GE NUT HUB (Part# WH01X10618) is a genuine OEM part used in many GE washers. It is a plastic hub that holds the agitator in place. The hub is located at the top of the agitator and is secured with a nut. This part helps to keep the agitator from wobbling or moving around during operation. It also ...

GE NUT PULLEY - Part# WH01X10611 is a replacement part for GE washing machines. It is a plastic pulley with a metal nut attached to it. The pulley is used to drive the belt that turns the agitator in the washer. The nut on the pulley is used to secure the belt in place. This part is made of durabl...

GE Nut Speed - Part# WE02X20269 is a replacement part for GE dryers. It is a metal nut that is used to secure the drum belt to the motor pulley. The nut is made of metal and has a 5/16-inch thread size. It is designed to fit specific models of GE dryers, including Hotpoint, RCA, and GE Profile mod...

GE Pin Alignment - Part# WH01X10596 is a part used in General Electric (GE) washing machines. It is a pin alignment part that helps to align the drum and the drive shaft of the washing machine. The pin alignment part is made of metal and has two pins that fit into corresponding holes in the drive ...

The GE Press Hose Clamp (Part# WH16X10152) is a stainless steel clamp designed to secure hoses and other flexible tubing to fittings. It is used in a variety of applications, including refrigerators, dishwashers, washing machines, and other household appliances. The clamp features a unique press-f...

The GE Pressure Switch Part# WH12X10530 is a pressure switch used in washing machines to detect the water level in the tub. It is a safety device that shuts off the water supply to the washer when the water level gets too high. The switch is connected to a float arm that rises and falls with the w...

GE Pump Drain Part# WH23X10040 is a replacement part for GE washing machines. It is a pump drain that helps to remove water from the washer during the draining cycle. The pump drain is made of durable plastic and features a 1/4 inch outlet hose connection. It also includes an inlet filter to help ...

The GE ROD ASSEMBLY FRONT - Part# WH16X10151 is a part used in washing machines. It is a replacement part for the front rod assembly on certain GE washing machines. This part is made of metal and plastic and is designed to help keep the drum in place during the wash cycle. It attaches to the front...

The GE ROD ASSEMBLY REAR - Part# WH16X10150 is a replacement part for a washing machine. It is the rear rod assembly that helps to support the rear of the washer tub. This part is made of metal and includes two rods, two nuts, and two washers. The rods are used to attach the rear of the washer tub...

GE Safety T'Stat 27" Gas - Part# WE4M529 is a gas safety thermostat designed to be used with gas furnaces and other gas-fired heating appliances. It is designed to shut off the gas supply if the temperature in the appliance exceeds a preset limit. The thermostat is equipped with a manual reset but...

GE Scr 8-16 B Flp .525 S Zn - Part# WH01X10631 is a part manufactured by General Electric (GE). It is a self-tapping screw with an 8-16 thread size, a flat head, and a .525 inch shank length. The material is zinc plated steel, which provides corrosion resistance and durability. This part is used t...

GE SCREW - Part# WE2M302 is a type of screw manufactured by General Electric. It is a self-tapping, self-drilling screw designed for use in metal and wood applications. The screw has a #2 Phillips head and is made from steel with a zinc plating for corrosion resistance. The threads are coarse and ...

GE Screw - Part# WH2X1217 is a self-tapping screw manufactured by General Electric. It is made of steel and has a zinc plated finish. The screw has a #8-32 thread size and is 1/2 inch long. It is designed for use in applications such as attaching drywall, plywood, and other materials to wood or me...

GE Set Screw Pulley M. Assy - Part# WH01X10608 is a replacement part for General Electric washing machines. It is a pulley assembly that includes the pulley, set screw, and mounting bracket. The pulley is used to drive the belt that turns the agitator in the washer tub. The set screw secures the p...

The GE Shifter Hub (Part# WH01X10607) is a replacement part for a variety of GE washing machines. It is a plastic part that connects the shifter lever to the transmission. The shifter hub is responsible for controlling the direction of the agitator in the washer. It also helps to ensure that the w...

GE Socket Rod Support - Part# WH01X10620 is a part used in many GE washing machines. It is a metal rod that supports the agitator in the washer tub. The rod is inserted into the socket on the bottom of the agitator and held in place with a clip. This part helps to keep the agitator from moving aro...

GE Spring Shifter - Part# WH01X10606 is a replacement part for GE washing machines. It is a small plastic part that helps to shift the drive pulley on the transmission shaft. The spring shifter helps to move the drive pulley back and forth, allowing the transmission to engage and disengage from th...

GE STRAP ASSY - Part# WH01X20442 is a part used in many GE washing machines. It is a plastic strap that attaches to the back of the washer and helps to secure the outer tub to the cabinet. The strap is made of durable plastic and has two holes for mounting screws. This part helps to keep the washe...

GE Support Assembly - Part# WH16X10186 is a part used in washing machines manufactured by General Electric. It is a support assembly that helps to hold the agitator in place and provide stability to the washer. The part includes two plastic supports, two metal clips, and four screws. The part numb...

The GE Support Sensor Board - Part# WH12X20439 is a replacement part for General Electric washing machines. It is a circuit board that is responsible for controlling the water level, temperature, and spin speed of the washer. The board contains several sensors that detect the water level, temperat...

GE Switch Interlock Part# WD21X10261 is a safety switch designed to prevent the opening of a dishwasher door while the dishwasher is in operation. The switch works by sensing when the door is opened and then automatically shutting off power to the dishwasher. This prevents any potential accidents ...

GE Switch Selector - Part# WH12X10509 is a replacement part for General Electric washing machines. It is a selector switch that allows the user to choose between different wash cycles and settings. The switch has four positions: Off, Normal, Permanent Press, and Delicate. It also has a knob that c...

GE Switch Selector - Part# WH12X10510 is a replacement part for General Electric washing machines. It is a selector switch that controls the water level, wash cycle, and spin speed of the machine. The switch has three positions: low, medium, and high. It is made of durable plastic and metal compon...

GE THERMISTOR ASM - Part# WH12X10512 is a thermistor assembly made by General Electric (GE). It is a temperature sensing device that is used in many of GE's appliances, such as washing machines, dryers, and refrigerators. The thermistor assembly consists of a thermistor element, which is a tempera...

GE TOP BEARING - Part# WH03X20271 is a top bearing for a washing machine. It is designed to fit specific General Electric manufactured washing machine models including Hotpoint and RCA. This part helps to support the outer tub and keep it stable during the spin cycle. The bearing helps to reduce n...

GE Transmission Pulley - Part# WH38X10018 is a replacement part for GE washing machines. It is a metal pulley that connects the motor to the transmission, allowing the motor to turn the transmission and agitate the clothes in the washer. The pulley is made of durable metal and has a 5/16" bore wit...

GE TRAP DUCT ASM 27" - Part# WE14M192 is a part manufactured by General Electric (GE) for use in their range hoods. It is a 27-inch long assembly that includes a trap duct, which is used to capture grease, smoke, and other airborne particles from the range hood. The assembly also includes mounting...

GE TUB 27" - Part# WH45X10149 is a replacement part for a washing machine. It is the inner tub of the washing machine, which holds the clothes during the wash cycle. The tub is made of stainless steel and measures 27 inches in diameter. It has a capacity of up to 4.5 cubic feet and comes with a dr...

GE VALVE AND BURNER ASM 27" - Part# WE25M78 is a replacement part for a GE range or oven. It is an assembly that includes the valve and burner for a 27-inch range or oven. The valve controls the flow of gas to the burner, while the burner distributes heat evenly across the cooking surface. This pa...

GE Washer Hub Part# WH01X10617 is a replacement part for GE washing machines. It is a plastic hub that fits onto the drive shaft of the washer and connects to the agitator. The hub helps to keep the agitator in place and prevents it from wobbling or coming loose during operation. The hub also help...

The GE Water Inlet Assembly - Part# WH13X10065 is a replacement part for GE washing machines. It is a direct replacement for the original part and is designed to provide a secure connection between the water supply line and the washing machine. The assembly includes the inlet valve, hose, and moun...

HINGE - Part# WE1M1033 is a replacement part for a dryer door. It is made of metal and is designed to attach the dryer door to the dryer cabinet. The hinge has two parts, one part attaches to the door and the other part attaches to the cabinet. The hinge allows the door to open and close smoothly....