Model: GTH18DCXDRWW

GE Button-Plug Part# WR12X10129 is a replacement part for General Electric (GE) washers. It is a plastic button and plug assembly that fits into the top of the washer's control panel. The button-plug assembly includes a push button, a plug, and two wires. The push button is used to start and stop ...

GE COVER EVAP ASM - Part# WR17X11641 is a replacement part for GE refrigerators. It is the evaporator cover assembly, which is a plastic cover that fits over the evaporator coils in the freezer section of the refrigerator. The evaporator cover helps to keep the cold air inside the freezer and prev...

GE GASKET DOOR FF - Part# WR24X10184 is a replacement part for General Electric (GE) refrigerators. It is a gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of durable rubber and has a magnetic strip along the edge to ensure a tight seal. This...

The GE GASKET DOOR FZ - Part# WR24X10185 is a replacement part for a refrigerator. It is a flexible gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of a durable rubber material and is designed to fit around the door frame of the refrigerator....

The GE GASKET DOOR FZ - Part# WR24X10187 is a replacement part for a refrigerator. It is a flexible rubber gasket that fits around the perimeter of the refrigerator door to create an airtight seal. This helps to keep cold air in and warm air out, which helps to maintain the temperature inside the ...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Fresh Food Door Seal Gasket - Part# WR24X10186 is a replacement part for refrigerators. It is designed to fit specific models of GE, Hotpoint, PartsIPS, and Kenmore refrigerators. The gasket is made of durable rubber and helps to keep ...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Vegetable Crisper Pan Cover - Part# WR32X10537 is a replacement part for the vegetable crisper pan in select GE, Hotpoint, PartsIPS, and Kenmore refrigerators. This part is made of durable plastic and helps to keep vegetables fresh and...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Refrigerator Water Inlet Fill Valve - Part# WR57X10033 is a replacement part for refrigerators. It is used to fill the refrigerator with water from the water supply line. The valve is made of durable plastic and has a flow rate of up to 6 gallo...

GE Mobility ASM Front - Part# WR02X12233 is a part used in many GE appliances. It is a front assembly for the mobility of the appliance. This part is made of durable plastic and is designed to provide reliable and smooth movement of the appliance. It is used in many GE refrigerators, dishwashers, ...

GE PAN 1/2 HAMM - Part# WR32X10181 is a replacement part for GE refrigerators. It is a half-width pan that fits in the bottom of the refrigerator and is used to collect water from the defrost cycle. The pan is made of durable plastic and measures approximately 16 inches wide by 6 inches deep. It h...

GE PAN SNACK - Part# WR32X10473 is a replacement part for GE refrigerators. It is a plastic pan that fits in the bottom of the refrigerator and is used to collect water from the defrost cycle. The pan helps to keep the refrigerator clean and free of mold and mildew. It also helps to prevent food f...

The GE PK Handle Small Asm Wh - Part# WR12X10760 is a replacement part for a range of GE appliances. It is a white plastic handle assembly that is used to open and close the oven door. The handle measures approximately 3 inches in length and 1 inch in width. It has two mounting holes on the back s...

GE PTCR OVERLOAD Part# WR09X10105 is a part used in many GE refrigerators. It is a thermal overload protector that helps protect the compressor from overheating. The PTCR overload is designed to shut off the compressor if it gets too hot, preventing damage to the compressor and other components. T...

GE SHELF ASM FZ - Part# WR71X10702 is a replacement shelf assembly for GE refrigerators. It is made of white plastic and measures approximately 16.5 inches wide by 18.5 inches deep. The shelf has two adjustable shelves and can be used to store food items, beverages, and other items in the refriger...

GE SHELF CANT GLS - Part# WR32X10540 is a replacement shelf for GE refrigerators. It is made of glass and is designed to fit into the cantilever shelf system of GE refrigerators. The shelf measures 32 inches wide by 10.5 inches deep and has a white finish. It is designed to hold up to 25 pounds of...

GE Shelf Cant Half - Part# WR71X10280 is a replacement part for GE refrigerators. It is the left side of the shelf cant, which is the metal frame that supports the shelves in the refrigerator. The shelf cant half attaches to the back wall of the refrigerator and helps to keep shelves in place. Thi...

GE Shelf Front FF (Part# WR71X10683) is a replacement part for GE refrigerators. It is a shelf front that fits onto the front of the refrigerator shelf and helps to keep items from falling off the shelf. The part is made of plastic and comes in white. It measures approximately 11 inches wide by 3 ...

GE SHELF FRONT FULL FZ - Part# WR71X10681 is a replacement shelf front for GE refrigerators. It is made of plastic and measures approximately 22 inches wide by 4 inches high. The shelf front is designed to fit all GE refrigerator models with a full-width freezer drawer. It is designed to replace t...

GE Shelf Front Half FF (Part# WR71X10682) is a replacement part for GE refrigerators. It is the front half of the shelf that attaches to the refrigerator door. This part is made of plastic and is used to hold items in place on the shelf. It helps keep items from falling off when the door is opened...

GE STOP DOOR - Part# WR02X10767 is a replacement part for GE refrigerators. It is a door stop that helps to keep the refrigerator door from swinging open too far and damaging the refrigerator. The part is made of plastic and is designed to fit most GE refrigerators. It attaches to the inside of th...

GE Stripper IM is a part number WR29X10083 that is used in GE refrigerator ice makers. It is a plastic strip that helps to push the ice cubes out of the ice maker and into the storage bin. The strip is made of durable plastic and is designed to last for many years. It has a curved shape that fits ...

GE Wheel Mobility FRT (Part# WR02X13167) is a wheeled mobility frame designed to provide support and stability for a range of GE appliances. The frame is made from durable steel and features four swivel casters that allow for easy maneuverability. The frame also includes adjustable feet to ensure ...