Model: GTH18DBMARWW

GE Button-Plug Part# WR12X10129 is a replacement part for General Electric (GE) washers. It is a plastic button and plug assembly that fits into the top of the washer's control panel. The button-plug assembly includes a push button, a plug, and two wires. The push button is used to start and stop ...

GE CAP SHELF FR - Part# WR02X10789 is a replacement part for GE refrigerators. It is a shelf frame that is used to hold the shelves in place. The shelf frame is made of plastic and measures approximately 17 inches wide by 7 inches deep. It has two mounting holes on the back side for attaching the ...

GE CAP SHELF FR - Part# WR02X10790 is a replacement part for GE refrigerators. It is a shelf frame that holds the shelves in place. The shelf frame is made of plastic and has two clips on the back that attach to the refrigerator wall. The shelf frame also has two slots on the front that hold the s...

GE CAP SHELF FR - Part# WR02X10791 is a refrigerator shelf frame manufactured by General Electric. It is designed to hold the shelves in place inside the refrigerator. The shelf frame is made of durable plastic and comes with mounting hardware for easy installation. The shelf frame measures approx...

GE CAP SHELF FR - Part# WR02X10792 is a refrigerator shelf frame made by General Electric. It is designed to hold the shelves in place in the refrigerator. The shelf frame is made of durable plastic and comes with mounting hardware for easy installation. The shelf frame measures approximately 18 i...

GE Clip Grille Bisque (Part# WR02X10738) is a replacement part for GE refrigerators. It is a plastic grille that is used to cover the air vent on the refrigerator. The grille helps to keep dust and debris from entering the refrigerator and also helps to keep the air circulating properly. The grill...

GE CONTROL DEFR - Part# WR09X10041 is a defrost control board for GE refrigerators. It is used to control the defrost cycle of the refrigerator. The board monitors the temperature inside the refrigerator and activates the defrost cycle when necessary. It also monitors the temperature of the evapor...

GE Door Dairy C - Part# WR22X10024 is a replacement part for GE refrigerators. It is a dairy door bin that fits in the refrigerator door and provides storage for dairy items such as butter, cheese, and yogurt. The part number WR22X10024 is specific to certain models of GE refrigerators. This part ...

GE GASKET CVR PAN FRONT - Part# WR14X10075 is a replacement part for General Electric (GE) refrigerators. It is a gasket cover pan that fits on the front of the refrigerator. This part helps to keep the cold air in and the warm air out, ensuring that your food stays fresh and cold. The gasket cove...

GE GASKET HOOD - Part# WR14X10077 is a replacement part for a range hood. It is a rubber gasket that fits around the edge of the range hood to create an airtight seal between the hood and the wall. The gasket helps to prevent air from escaping through gaps in the installation, which can reduce ene...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Defrost Terminator Thermostat - Part# WR50X10025 is a thermostat that is used to control the temperature of the refrigerator. It is designed to turn off the defrost cycle when the desired temperature has been reached. The thermostat mo...

The GE Grommet Water Fill Assy - Part# WR02X10804 is a replacement part for a refrigerator. It is a rubber grommet that is used to fill the water reservoir in the refrigerator. The grommet is designed to fit into the hole in the back of the refrigerator and allow water to flow from the water line ...

GE Nozzle Control Foam - Part# WR02X10723 is a foam sealant used to fill gaps and cracks in refrigerators. It is designed to prevent air and moisture from entering the refrigerator, which can cause damage to the appliance. The foam is applied around the edges of the refrigerator door, as well as a...

GE PAN 1/2 HAMM - Part# WR32X10181 is a replacement part for GE refrigerators. It is a half-width pan that fits in the bottom of the refrigerator and is used to collect water from the defrost cycle. The pan is made of durable plastic and measures approximately 16 inches wide by 6 inches deep. It h...

GE RELAY PTCR - Part# WR07X10031 is a relay used in many GE appliances. It is a single-pole, double-throw (SPDT) relay with a normally open (NO) and normally closed (NC) contact. The relay is rated for 10A at 250VAC and has a maximum switching capacity of 16A at 250VAC. It is designed to be used a...

GE SCREW 8-18 AB IHW 3/8 S - Part# WB01T10017 is a type of screw manufactured by General Electric. It is an 8-18 AB IHW (Intermediate Hex Washer) 3/8 inch S (Stainless Steel) screw. This type of screw is used in a variety of applications, including electrical, plumbing, and construction. The part ...

GE Shelf Front - Part# WR71X10281 is a replacement part for GE refrigerators. It is a plastic shelf front that attaches to the refrigerator door and provides additional storage space. The shelf front is designed to fit GE models GTH18GCDCRWW, GTH18GCDCRBB, GTH18GCDCRCC, GTH18GCDCRWW, GTH22SCDCRBB,...

GE Shelf Front - Part# WR71X10282 is a replacement part for GE refrigerators. It is a white plastic shelf front that fits onto the refrigerator shelf to provide a neat and organized look. The shelf front is designed to fit onto the GE refrigerator shelves and can be used to store items such as con...

GE Slide Snack is a refrigerator drawer system designed to make food storage and organization easier. The system consists of two drawers that slide out from the refrigerator door, allowing for easy access to items stored in the back of the fridge. The drawers are adjustable and can be used to stor...

GE STOP DOOR - Part# WR02X10767 is a replacement part for GE refrigerators. It is a door stop that helps to keep the refrigerator door from swinging open too far and damaging the refrigerator. The part is made of plastic and is designed to fit most GE refrigerators. It attaches to the inside of th...

GE STOP DOOR FF - Part# WR02X10740 is a part used in some GE refrigerator models. It is a door stop that helps to keep the refrigerator door from swinging open too far and hitting the wall or other objects. The part is made of plastic and has two mounting holes for easy installation. It also has a...

GE SUPPORT TWIS is a part number for a universal support bracket designed to be used with GE refrigerators. The part number WR02X10736 is a specific model of the support bracket that is designed to fit most GE refrigerator models. The support bracket is made of durable steel and is designed to pro...