Model: GTH18CBD4RCC

GE Actuator Air - Part# WR02X12018 is a replacement part for General Electric refrigerators. It is an air actuator that helps to control the temperature in the refrigerator. The air actuator is responsible for controlling the flow of cold air into the refrigerator and warm air out of it. It works ...

GE Bracket Evap Part# WR02X10516 is a replacement part for GE refrigerators. It is a bracket that holds the evaporator fan motor in place. The bracket is made of metal and has two mounting holes for attaching the fan motor. It also has two slots for securing the wiring harness. This part is used i...

GE Bracket Evap Fan Rear - Part# WR21X10152 is a replacement part for General Electric refrigerators. It is a bracket that holds the evaporator fan motor in place at the rear of the refrigerator. The evaporator fan motor circulates air over the evaporator coils to help keep the refrigerator cool. ...

The GE Comp. Repl. Kit R134A - Part# WR87X10096 is a replacement kit for GE refrigerators that use R134A refrigerant. It includes a new compressor, condenser fan motor, evaporator fan motor, and start relay. The kit also includes a filter-drier, pressure switch, and instructions for installation. ...

GE Control Housing - Part# WR17X12852 is a replacement part for General Electric refrigerators. It is a plastic housing that contains the electronic control board and other components that control the refrigerator's temperature, defrost cycle, and other functions. The housing is designed to protec...

GE DUCT AIR FZ E04 - Part# WR17X11891 is a part for a GE refrigerator. It is the air duct that connects the evaporator fan motor to the evaporator. This part helps to circulate cold air throughout the refrigerator and freezer compartments. The air duct is made of plastic and measures approximately...

GE Foam Housing Control - Part# WR01X10996 is a foam housing control designed for use with GE refrigerators. It is used to replace the existing foam housing control in the refrigerator. The foam housing control helps to regulate the temperature inside the refrigerator and keep it at a consistent l...

GE GASKET DOOR FF - Part# WR24X10237 is a replacement part for GE refrigerators. It is a flexible foam gasket that fits around the perimeter of the refrigerator door to create an airtight seal. This helps to keep cold air in and warm air out, ensuring that your food stays fresh and your energy bil...

The GE GASKET DOOR FZ - Part# WR24X10227 is a replacement part for a refrigerator. It is a flexible rubber gasket that fits around the perimeter of the refrigerator door to create an airtight seal. This helps to keep cold air in and warm air out, ensuring that food stays fresh and at the right tem...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Refrigerator Freezer Fixed Door Shelf Bar (Part# WR17X11890) is a replacement part for refrigerators and freezers. It is a plastic shelf bar that attaches to the inside of the refrigerator or freezer door. The shelf bar helps to keep items orga...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Defrost Control Timer - Part# WR09X10049 is a replacement part for refrigerators. It is responsible for controlling the defrost cycle of the refrigerator. The timer helps to regulate the temperature inside the refrigerator and ensures ...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Evaporator Fan Blade - Part# WR60X10204 is a replacement part for refrigerators. It is the fan blade that circulates air over the evaporator coils to help keep the refrigerator cool. The fan blade is made of plastic and measures approx...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Freezer Door Seal Gasket - Part# WR24X10228 is a replacement part for refrigerators and freezers. It is designed to provide a tight seal between the refrigerator/freezer door and the cabinet, preventing warm air from entering the refri...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Fresh Food Door Seal Gasket - Part# WR24X10236 is a replacement part for refrigerators. It is designed to provide an airtight seal between the refrigerator door and the cabinet, helping to keep cold air in and warm air out. The gasket ...

This is a replacement screw for a General Electric Hotpoint PartsIPS Kenmore refrigerator. The screw is 10-16 AB PNT20 1/2 S and has a part number of WR01X10590. It is used to secure the interior components of the refrigerator, such as shelves, drawers, and door panels. The screw is made of stainl...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Vegetable Crisper Pan Cover - Part# WR32X10398 is a replacement part for refrigerators. It is designed to fit in the vegetable crisper pan of select GE, Hotpoint, PartsIPS and Kenmore refrigerators. The cover helps to keep vegetables f...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Refrigerator HANDLE DOOR WHITE - Part# WR12X10107 is a replacement refrigerator door handle. It is made of white plastic and measures approximately 8 inches long. This handle is designed to fit select GE, Hotpoint, RCA, and Kenmore refrigerator...

GE Handle Door - Part# WR12X10454 is a replacement door handle for GE refrigerators. It is made of durable plastic and comes in a white finish. The handle measures 12 inches long and 1 inch wide, and it has two mounting holes for easy installation. This handle is designed to fit most GE refrigerat...

GE Handle Door Assembly FZ (Part# WR12X10685) is a replacement part for GE refrigerators. It is a handle assembly that attaches to the door of the refrigerator and allows it to be opened and closed. The handle is made of plastic and has a black finish. It includes two screws for installation. This...

The GE Handle Door Assy Fz Bisque - Part# WR12X10453 is a replacement part for a refrigerator door. It is made of plastic and comes in a bisque color. The handle is designed to fit GE refrigerators and is easy to install. It includes two screws and a mounting bracket for secure installation. The h...

GE Handle Door FF (Part# WR12X10684) is a replacement part for General Electric (GE) refrigerators. It is a handle for the freezer door of the refrigerator. The handle is made of plastic and is white in color. It measures approximately 10 inches long and 1 inch wide. The handle has two mounting ho...

GE HNDL DRFZ WH - Part# WR12X10108 is a refrigerator door handle manufactured by General Electric. It is a white handle with a part number of WR12X10108. This handle is designed to fit most GE and Hotpoint brand refrigerators. It is made of durable plastic and features a textured finish for easy g...

GE Knob Control (Part# WR02X13355) is a replacement part for General Electric (GE) ovens. It is a black plastic knob with a white indicator line and a metal shaft that fits into the oven's control panel. The knob is used to adjust the temperature of the oven, allowing users to set the desired cook...

GE Plug Button Thimble Bisque - Part# WR02X10850 is a replacement part for a range or oven. It is a bisque-colored plastic button that fits into the control panel of the appliance. The button is used to turn on and off the oven or range, as well as to select various settings such as temperature, t...

GE PTCR OVERLOAD Part# WR09X10105 is a part used in many GE refrigerators. It is a thermal overload protector that helps protect the compressor from overheating. The PTCR overload is designed to shut off the compressor if it gets too hot, preventing damage to the compressor and other components. T...

GE SCR 12-24 GX HXW .750 - Part# WR01X10950 is a replacement part for a variety of GE refrigerators. It is a start relay, which is an electrical device that helps to control the compressor motor in the refrigerator. The start relay helps to ensure that the compressor motor starts and runs properly...

GE Shelf Fixed FF (Part# WR17X11911) is a refrigerator shelf designed to fit in the freezer section of a GE refrigerator. It is made of durable plastic and has a white finish. The shelf is designed to hold food items securely in place and can be adjusted to fit different sizes of food items. The s...

A metal hinge pin, part# WR02X12238, is a small metal pin used to secure a door hinge to the door frame. It is typically made of steel and has a diameter of 1/4 inch. The pin is inserted into the hinge and then secured with a screw or nut. This type of pin is commonly used in residential and comme...