Model: GTH18ABT2RWW

GE Actuator Air - Part# WR02X12018 is a replacement part for General Electric refrigerators. It is an air actuator that helps to control the temperature in the refrigerator. The air actuator is responsible for controlling the flow of cold air into the refrigerator and warm air out of it. It works ...

GE Bracket Evap Part# WR02X10516 is a replacement part for GE refrigerators. It is a bracket that holds the evaporator fan motor in place. The bracket is made of metal and has two mounting holes for attaching the fan motor. It also has two slots for securing the wiring harness. This part is used i...

GE Bracket Evap Fan Rear - Part# WR21X10152 is a replacement part for General Electric refrigerators. It is a bracket that holds the evaporator fan motor in place at the rear of the refrigerator. The evaporator fan motor circulates air over the evaporator coils to help keep the refrigerator cool. ...

The GE Comp. Repl. Kit R134A - Part# WR87X10096 is a replacement kit for GE refrigerators that use R134A refrigerant. It includes a new compressor, condenser fan motor, evaporator fan motor, and start relay. The kit also includes a filter-drier, pressure switch, and instructions for installation. ...

GE Diffuser Air FF (Part# WR02X11793) is a replacement part for GE refrigerators. It is a plastic air diffuser that fits into the top of the refrigerator compartment and helps to evenly distribute cold air throughout the refrigerator. The air diffuser helps to keep food fresh and evenly cooled. It...

GE Drain Pan - Part# WR32X10455 is a replacement part for GE refrigerators. It is a plastic drain pan that collects water from the defrost cycle of the refrigerator and directs it to the drain tube. The drain pan is located at the bottom of the refrigerator, underneath the evaporator coils. It hel...

GE DUCT AIR FZ E04 - Part# WR17X11891 is a part for a GE refrigerator. It is the air duct that connects the evaporator fan motor to the evaporator. This part helps to circulate cold air throughout the refrigerator and freezer compartments. The air duct is made of plastic and measures approximately...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Refrigerator Freezer Fixed Door Shelf Bar (Part# WR17X11890) is a replacement part for refrigerators and freezers. It is a plastic shelf bar that attaches to the inside of the refrigerator or freezer door. The shelf bar helps to keep items orga...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Evaporator Fan Blade - Part# WR60X10204 is a replacement part for refrigerators. It is the fan blade that circulates air over the evaporator coils to help keep the refrigerator cool. The fan blade is made of plastic and measures approx...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Freezer Door Seal Gasket - Part# WR24X10228 is a replacement part for refrigerators and freezers. It is designed to provide a tight seal between the refrigerator/freezer door and the cabinet, preventing warm air from entering the refri...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Fresh Food Door Seal Gasket - Part# WR24X10236 is a replacement part for refrigerators. It is designed to provide an airtight seal between the refrigerator door and the cabinet, helping to keep cold air in and warm air out. The gasket ...

This is a replacement screw for a General Electric Hotpoint PartsIPS Kenmore refrigerator. The screw is 10-16 AB PNT20 1/2 S and has a part number of WR01X10590. It is used to secure the interior components of the refrigerator, such as shelves, drawers, and door panels. The screw is made of stainl...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Vegetable Crisper Pan Cover - Part# WR32X10398 is a replacement part for refrigerators. It is designed to fit in the vegetable crisper pan of select GE, Hotpoint, PartsIPS and Kenmore refrigerators. The cover helps to keep vegetables f...

GE GUSSET LH - Part# WR02X10530 is a left-hand gusset for a General Electric refrigerator. It is used to secure the refrigerator door to the frame of the appliance. The gusset is made of plastic and measures approximately 4 inches long by 1 inch wide. It has two mounting holes and comes with two s...

GE Knob Control (Part# WR02X13355) is a replacement part for General Electric (GE) ovens. It is a black plastic knob with a white indicator line and a metal shaft that fits into the oven's control panel. The knob is used to adjust the temperature of the oven, allowing users to set the desired cook...

GE Plug Button - Part# WR02X11760 is a replacement part for General Electric (GE) refrigerators. It is a plastic button that fits into the control panel of the refrigerator and is used to turn the refrigerator on and off. The button has two prongs that fit into two holes in the control panel, and ...

GE SCR 12-24 GX HXW .750 - Part# WR01X10950 is a replacement part for a variety of GE refrigerators. It is a start relay, which is an electrical device that helps to control the compressor motor in the refrigerator. The start relay helps to ensure that the compressor motor starts and runs properly...

GE Shelf Fixed FF (Part# WR17X11911) is a refrigerator shelf designed to fit in the freezer section of a GE refrigerator. It is made of durable plastic and has a white finish. The shelf is designed to hold food items securely in place and can be adjusted to fit different sizes of food items. The s...

GE Tape Felt - Condenser - Part# WR02X10534 is a condenser felt tape designed for use with GE refrigerators. It is used to seal the condenser coils and prevent air leakage. The tape is made of a high-quality, durable material that resists tearing and provides a tight seal. The tape measures approx...

A metal hinge pin, part# WR02X12238, is a small metal pin used to secure a door hinge to the door frame. It is typically made of steel and has a diameter of 1/4 inch. The pin is inserted into the hinge and then secured with a screw or nut. This type of pin is commonly used in residential and comme...