Model: GTDX185GD5CC

GE 3 AB Fuse - Part# WE1X21975 is a three-pole, air-break fuse designed for use in residential and commercial applications. This fuse is rated for up to 600 volts and has a current rating of 30 amps. It is UL listed and CSA certified for safety. The fuse features a dual-element design that provide...

GE Bearing Slide, Part# WE3M51 is a bearing slide designed for use in a variety of applications. It is made from hardened steel and features a ball bearing design that allows for smooth, low-friction movement. The slide has two mounting holes and can be used with either metric or imperial screws. ...

GE Bearing Slide, Part# WE3M52 is a self-lubricating bearing slide designed for use in applications requiring smooth, low friction linear motion. The slide is constructed of high-grade steel and features a hardened steel ball bearing raceway that provides superior wear resistance and low friction ...

A GE Blower Wheel (Part# WE16X20393) is a fan wheel used in some GE dryers to circulate air throughout the dryer drum. The blower wheel is made of plastic and has a diameter of approximately 16 inches. It is connected to the motor shaft via a set screw and is responsible for pushing air through th...

GE Diffuser - Part# WE14X20408 is a replacement part for GE dryers. It is a plastic part that fits over the dryer's exhaust vent and helps to evenly distribute the air flow from the dryer. The diffuser helps to reduce noise from the dryer and also helps to prevent lint from escaping into the room....

The GE Drive Belt (Part# WE12X21574) is a replacement part for General Electric dryers. It is a single-groove, 5-rib belt that measures approximately 93 1/2 inches in length and 1/4 inch in width. This belt is used to connect the motor to the drum of the dryer, allowing it to rotate and tumble the...

GE DRUM ASM - Part# WE21X20562 is a replacement drum assembly for GE dryers. It is a genuine OEM part and is designed to fit specific GE manufactured dryer models including Hotpoint and RCA. This drum assembly includes the drum, felt seal, belt, motor pulley, and idler pulley. It also includes the...

GE Dryer Baffle Part# WE14X20683 is a replacement part for GE dryers. It is a baffle that helps to direct the air flow in the dryer drum. The baffle helps to ensure that the clothes are evenly dried and prevents them from bunching up in one area of the drum. The baffle also helps to reduce noise a...

GE FUSE HOLDER 3AB - Part# WE1X21955 is a fuse holder designed for use with 3AB fuses. It is a single-pole, non-indicating fuse holder that is UL listed and CSA certified. The holder has a voltage rating of 600VAC/250VDC and an interrupt rating of 10kA. It features a thermoplastic body with an int...

The GE Gas Igniter Assembly (Part# WE4M449) is a replacement part for many GE gas dryers. It is an electrical component that is responsible for providing the spark that ignites the gas in the dryer to start the heating process. The igniter assembly includes a ceramic igniter, a bracket, and two wi...

GE Gasket (Seal) 39 Inch - Part# WE1M825 is a replacement part for GE dryers. It is a 39-inch long gasket that seals the door of the dryer to prevent heat and moisture from escaping. The gasket is made of durable rubber and is designed to last for years. It is easy to install and comes with detail...

The GE General Electric Hotpoint Dryer Drum Front Support Bearing is a replacement part for dryers. This part is designed to support the front of the dryer drum and help reduce vibration and noise. The bearing is made of durable plastic and metal materials, and it is designed to fit specific model...

The GE General Electric Hotpoint PartsIPS Kenmore Clothes Dryer Door Handle (Part# WE01X20580) is a replacement part for dryers. It is made of durable plastic and features a white finish. The handle measures approximately 4-1/2 inches long and 1-1/4 inches wide. It has two mounting holes on the ba...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer DRIVE MOTOR WITH PULLEY - Part# WE17M66 is a replacement part for a clothes dryer. It is the motor that powers the drum of the dryer, which rotates to tumble and dry the clothes. The motor is connected to a pulley, which helps to ...

The GE IDLER ARM - Part# WE03X20434 is a part used in many GE dryers. It is a metal arm that connects the drive belt to the drum of the dryer. The idler arm helps to keep tension on the drive belt, which allows the drum to rotate and turn the clothes inside. The idler arm also helps to reduce nois...

GE LAMP - Part# WE05X20431 is a replacement lamp for General Electric dryers. It is a 120-volt, 15-watt bulb that fits into the light socket of the dryer. The lamp is designed to provide illumination inside the dryer so that users can easily see what they are doing when loading or unloading clothe...

GE Levelling Foot Part# WE1M1101 is a heavy-duty adjustable foot designed to provide a stable and level base for large appliances. It is made of durable steel and features a wide base that helps distribute the weight of the appliance evenly across the floor. The foot has an adjustable height range...

GE Motor Strap - Part# WE1X921 is a replacement part for a variety of GE washing machines. It is a plastic strap that connects the motor to the cabinet of the washing machine. The strap helps to reduce vibration and noise from the motor during operation. It also helps to keep the motor in place an...

GE R.SWITCH (XCARE) ON/OFF - Part# WE4M399 is a switch designed to control the power supply of an appliance. It is used to turn the appliance on and off, and can be used in a variety of applications. The switch is rated for up to 20 amps at 120 volts, and has a maximum temperature rating of 140°F ...

The GE ROTARY SWITCH 4TEMP - Part# WE4M520 is a four-position rotary switch designed to control the temperature of an appliance. It is a single-pole, double-throw (SPDT) switch with four positions: Off, Low, Medium, and High. The switch is rated for 15 amps at 120/240 volts AC and has a temperatur...

GE Timer Part# WE04X20415 is a timer switch for a dryer. It is used to control the amount of time the dryer runs and to turn it off when the cycle is complete. The timer has a knob that can be set to the desired time, and when the knob is turned, it will start the dryer cycle. The timer also has a...

GE VALVE AND PIPE ASM - Part# WE11X20711 is a part used in GE washing machines. It is a valve and pipe assembly that connects the water inlet valve to the water supply line. The assembly includes a plastic pipe, two rubber hoses, and two clamps. The pipe is used to connect the water inlet valve to...