Model: GTDX185ED4CC

GE Bearing Slide, Part# WE3M51 is a bearing slide designed for use in a variety of applications. It is made from hardened steel and features a ball bearing design that allows for smooth, low-friction movement. The slide has two mounting holes and can be used with either metric or imperial screws. ...

GE Bearing Slide, Part# WE3M52 is a self-lubricating bearing slide designed for use in applications requiring smooth, low friction linear motion. The slide is constructed of high-grade steel and features a hardened steel ball bearing raceway that provides superior wear resistance and low friction ...

A GE Blower Wheel (Part# WE16X20393) is a fan wheel used in some GE dryers to circulate air throughout the dryer drum. The blower wheel is made of plastic and has a diameter of approximately 16 inches. It is connected to the motor shaft via a set screw and is responsible for pushing air through th...

GE Diffuser - Part# WE14X20408 is a replacement part for GE dryers. It is a plastic part that fits over the dryer's exhaust vent and helps to evenly distribute the air flow from the dryer. The diffuser helps to reduce noise from the dryer and also helps to prevent lint from escaping into the room....

GE Dryer Baffle Part# WE14X20683 is a replacement part for GE dryers. It is a baffle that helps to direct the air flow in the dryer drum. The baffle helps to ensure that the clothes are evenly dried and prevents them from bunching up in one area of the drum. The baffle also helps to reduce noise a...

The GE Dryer Heater Element with Mica (Part# WE11M10001) is a replacement part for many GE dryers. It is the component responsible for heating the air that passes through the dryer drum. The element is made of a metal coil surrounded by mica insulation. The mica helps to protect the element from d...

GE Gasket (Seal) 39 Inch - Part# WE1M825 is a replacement part for GE dryers. It is a 39-inch long gasket that seals the door of the dryer to prevent heat and moisture from escaping. The gasket is made of durable rubber and is designed to last for years. It is easy to install and comes with detail...

The GE General Electric Hotpoint Dryer Drum Front Support Bearing is a replacement part for dryers. This part is designed to support the front of the dryer drum and help reduce vibration and noise. The bearing is made of durable plastic and metal materials, and it is designed to fit specific model...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Dryer Door Handle Part# WE01X20419 is a replacement part for a variety of dryers. This handle is made of durable plastic and is designed to fit most models of dryers. It has a white finish and measures approximately 4 inches in length. The hand...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer 30 Amp 120V FUSE - Part# WE1M1002 is a replacement fuse for clothes dryers. It is designed to protect the dryer from overloading and short-circuiting. The fuse is rated at 30 amps and 120 volts, and it has a push-to-reset feature ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer CONTROL TIMER - Part# WE4M533 is a replacement timer for select dryers. It is designed to replace the original timer in your dryer and help keep it running smoothly. The timer controls the amount of time that the dryer runs, allow...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer DRIVE MOTOR WITH PULLEY - Part# WE17M66 is a replacement part for a clothes dryer. It is the motor that powers the drum of the dryer, which rotates to tumble and dry the clothes. The motor is connected to a pulley, which helps to ...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer MICA Heater & Housing Assembly - Part# WE11X20397 is a replacement part for clothes dryers. It is made up of a mica heater and a housing assembly. The mica heater is a heating element that helps to dry the clothes in the dryer. Th...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Push to Start Switch (Part# WE4M416) is a replacement part for many different models of clothes dryers. This switch is used to start the dryer when the door is closed and the start button is pressed. The switch has two terminals a...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer Rotary Temperature Switch - 4 Temps - Part# WE4M407 is a rotary switch that is used to control the temperature of a clothes dryer. It has four temperature settings: low, medium, high, and extra high. The switch is designed to be m...

GE Ground Strap Assembly (Part# WE1M1015) is a grounding strap designed to provide a secure connection between two metal surfaces. It is typically used to ground electrical equipment, such as appliances, to the home's electrical system. The strap consists of a flexible metal band with two eyelets ...

GE Holder Fuse, Part# WE1M1003 is a fuse holder designed to accept a 1/4" x 1-1/4" (6.35mm x 31.75mm) fuse. It is made of high-impact thermoplastic and features a hinged cover with a locking tab for secure installation. The holder has two mounting holes for easy installation and is UL listed for s...

The GE IDLER ARM - Part# WE03X20434 is a part used in many GE dryers. It is a metal arm that connects the drive belt to the drum of the dryer. The idler arm helps to keep tension on the drive belt, which allows the drum to rotate and turn the clothes inside. The idler arm also helps to reduce nois...

GE LAMP - Part# WE05X20431 is a replacement lamp for General Electric dryers. It is a 120-volt, 15-watt bulb that fits into the light socket of the dryer. The lamp is designed to provide illumination inside the dryer so that users can easily see what they are doing when loading or unloading clothe...

GE Levelling Foot Part# WE1M1101 is a heavy-duty adjustable foot designed to provide a stable and level base for large appliances. It is made of durable steel and features a wide base that helps distribute the weight of the appliance evenly across the floor. The foot has an adjustable height range...

GE R.SWITCH (XCARE) ON/OFF - Part# WE4M399 is a switch designed to control the power supply of an appliance. It is used to turn the appliance on and off, and can be used in a variety of applications. The switch is rated for up to 20 amps at 120 volts, and has a maximum temperature rating of 140°F ...

GE Resistor Part# WE4M255 is a general purpose resistor designed for use in a variety of applications. It is a four-terminal, non-inductive, wirewound resistor with an operating temperature range of -55°C to +155°C. The resistor has a power rating of 5 watts and a resistance range of 0.1 ohms to 1...