Model: GSS25LSLLCSS

The GE Bottom Pan Cover (Part# WR32X10885) is a replacement part for a variety of GE refrigerators. It is a plastic cover that fits over the bottom pan of the refrigerator, which is located at the bottom of the refrigerator and holds any water that may accumulate from defrosting. The cover helps t...

GE Bucket and Auger Assembly (Part# WR17X12091) is a replacement part for GE refrigerators. It is a combination of the bucket and auger assembly that helps to dispense ice from the refrigerator. The bucket holds the ice cubes while the auger rotates to push them out into the dispenser chute. This ...

GE CLIP Part# WR2X8203 is a plastic clip used to secure the refrigerator door gasket to the refrigerator door. It is designed to fit most General Electric and Hotpoint refrigerators. The clip is made of durable plastic and features a simple design that makes installation easy. The clip measures ap...

GE COVER ASM FF INLET - Part# WR49X10251 is a replacement part for General Electric (GE) refrigerators. It is the cover assembly for the fresh food inlet on the refrigerator. This part is made of plastic and is used to cover the inlet and protect it from dust and debris. The part number WR49X10251...

The GE Cup Fill Im - Part# WR29X10109 is a replacement part for GE refrigerators. It is a cup-shaped plastic part that fits into the back of the refrigerator and helps to fill the ice maker with water. The part is designed to fit into the back of most GE refrigerators and can be used to replace an...

The GE Door Handle FF - Part# WR12X21070 is a replacement door handle for GE refrigerators. It is made of durable plastic and comes in a white finish. The handle measures 4-1/2 inches long and 1-3/4 inches wide. It has two mounting holes on the back side and includes two screws for installation. T...

The GE FF Shelf Module - Part# WR71X24428 is a replacement shelf for GE refrigerators. It is designed to fit select models of GE refrigerators and provides additional storage space for food and other items. The shelf is made of durable plastic and features a white finish that will blend in with th...

The GE Ge Badge is a badge reader that is used to access secure areas in buildings. It is a small, lightweight device that attaches to a keychain or lanyard and can be used to quickly and easily gain access to restricted areas. The badge reader works by scanning an encoded RFID chip embedded in th...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Condenser Fan BLADE - Part# WR60X24484 is a replacement part for refrigerators. It is a fan blade that is used to circulate air around the condenser coils in the refrigerator. The fan blade helps to keep the condenser coils cool, which...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Dispenser Micro Switch - Part# WR23X10783 is a replacement part for refrigerators. It is a micro switch that is used to control the water and ice dispenser on the refrigerator door. The switch is activated when the user presses the but...

GE GRILL RECESS - Part# WR17X12910 is a replacement part for a GE refrigerator. It is a plastic grill that fits into the recess of the refrigerator and covers the condenser fan motor. The grill helps to keep dust and debris from entering the fan motor, which can cause it to overheat and malfunctio...

The GE Kit Harness Diode - Part# WR55X30923 is a diode used in the wiring harness of certain GE refrigerators. It is designed to protect the refrigerator's electronic control board from damage due to voltage spikes or other electrical issues. The diode works by allowing current to flow in one dire...

GE MIDDLE PAN ASSM - Part# WR32X22927 is a part for a General Electric refrigerator. It is the middle pan assembly, which is used to store food items in the refrigerator. The part includes the pan, shelf, and handle. The pan is made of durable plastic and has a textured finish for easy cleaning. T...

The GE Middle Pan Cover (Part# WR32X26246) is a replacement part for GE refrigerators. It is a white plastic cover that fits over the middle shelf pan in the refrigerator. This part helps to keep food and other items from falling off the shelf and onto the floor. It also helps to keep the refriger...

GE Overload Ptcr Combo - Part# WR08X31586 is a combination overload protector and thermal cut-out device designed to protect electric motors from overloads and overheating. It is designed to be used with single-phase, three-wire, 120/240VAC motors. The device features a manual reset button that mu...

GE Paddle Asm - Part# WR17X20449 is a replacement part for General Electric refrigerators. It is a paddle assembly that helps to dispense water and ice from the refrigerator. The part includes the paddle, lever, and spring. The paddle assembly is located in the ice maker and helps to control the f...

The GE Refrigerator LED Light Board - Part# WR55X26671 is a replacement part for General Electric refrigerators. It is a circuit board that contains the LED lights that illuminate the interior of the refrigerator. The board is responsible for controlling the brightness and color of the lights, as ...

A GE set screw, part# WR01X20424, is a type of fastener used to secure two or more objects together. It is a threaded fastener that has no head and is designed to be inserted into a pre-drilled hole. The set screw is tightened by turning it clockwise until it is firmly in place. The set screw has ...

GE TRIM SHELF FZ - Part# WR38X10456 is a replacement part for GE refrigerators. It is a plastic shelf trim that fits into the refrigerator door to provide a secure and stable surface for storing food items. The trim shelf is designed to fit into the door of most GE refrigerators and provides an ad...

GE XWF Manifold & Tubing - Part# WR17X30702 is a part used in refrigerators and freezers. It is a manifold and tubing assembly that helps to regulate the flow of water and other fluids throughout the appliance. The manifold consists of two parts: the manifold itself, which is made of plastic, and ...

TOP HINGE & PIN ASSY - Part# WR13X24863 is a part used in refrigerators. It is a top hinge and pin assembly that attaches the refrigerator door to the cabinet. The assembly includes two hinges, two pins, and two mounting screws. The hinges are made of metal and have a plastic bushing at the end of...