Model: GSE30VHBATBB

The GE Bottom Bracket Evap (Part# WR17X12635) is a part used in refrigerators to help circulate air around the refrigerator. It is located at the bottom of the refrigerator and helps to keep the air circulating throughout the unit. The evaporation helps to keep the temperature inside the refrigera...

GE Bucket and Auger Assembly (Part# WR17X12112) is a part used in GE refrigerators. It is a plastic bucket and auger assembly that helps to dispense ice from the refrigerator. The bucket holds the ice until it is ready to be dispensed, while the auger moves the ice from the bucket to the dispenser...

The GE Bucket Ice Display - Part# WR30X10019 is a replacement part for GE refrigerators. It is a plastic bucket that fits into the ice maker compartment of the refrigerator and holds the ice cubes until they are dispensed. The bucket has a clear plastic lid that allows you to see how much ice is i...

GE CAP FILTER BYPASS - Part# WR02X12343 is a part used in some GE refrigerator models to bypass the water filter. This part is used when the water filter needs to be replaced or when the water filter needs to be bypassed for any other reason. The GE CAP FILTER BYPASS - Part# WR02X12343 is a plasti...

GE Cover Motor Back - Part# WR17X12323 is a replacement part for GE refrigerators. It is the back cover of the motor assembly and is used to protect the motor from dust and debris. The part is made of plastic and is black in color. It measures approximately 8 inches by 6 inches and has two mountin...

GE Cover Upper (Part# WR31X10008) is a replacement part for GE refrigerators. It is a white plastic cover that fits over the top of the refrigerator, providing protection from dust and debris. The cover also helps to keep the refrigerator looking neat and tidy. It is designed to fit most GE refrig...

The GE Cup Fill Im - Part# WR29X10109 is a replacement part for GE refrigerators. It is a cup-shaped plastic part that fits into the back of the refrigerator and helps to fill the ice maker with water. The part is designed to fit into the back of most GE refrigerators and can be used to replace an...

GE Damper Assembly (Part# WR60X10229) is a replacement part for refrigerators. It is a motorized damper assembly that helps regulate the air flow in the refrigerator. The damper opens and closes to control the amount of cold air that enters the refrigerator from the freezer. This helps maintain an...

GE Dispenser Control Assembly (Part# WR55X10946) is a replacement part for GE refrigerators. It is a control board that controls the water and ice dispenser functions. It includes the control board, wiring harness, and mounting hardware. The control board receives signals from the dispenser switch...

GE Duct Asm Ff Transition - Part# WR02X13091 is a part manufactured by General Electric (GE) for use in ducted air conditioning systems. It is a transition piece that connects two different sized ducts together, allowing air to flow from one to the other. The part number WR02X13091 indicates that ...

The GE Filter Assembly and Tube (Part# WR17X12203) is a genuine OEM replacement part for select GE refrigerators. This part is designed to help filter out impurities from the water supply to the refrigerator. It includes a filter housing, a filter cartridge, and a tube that connects the filter hou...

The GE General Electric Hotpoint RCA PartsIPS Kenmore Refrigerator Evaporator Fan Motor - Part# WR60X10307 is a replacement part for refrigerators. It is designed to circulate air throughout the refrigerator and freezer compartments, helping to maintain a consistent temperature. The motor is locat...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Door Shelf Module Insert - Part# WR71X10764 is a replacement part for refrigerators. It is designed to fit in the door of the refrigerator and provide additional storage space. The shelf module insert is made of durable plastic and fea...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator DOOR STOP - Part# WR02X13425 is a replacement part for refrigerators. It is used to stop the refrigerator door from opening too far and potentially damaging the interior of the refrigerator. The door stop is made of plastic and has two...

GE GLIDE BUCKET LH DISP - Part# WR72X10233 is a replacement part for GE refrigerators. It is the left-hand dispenser bucket, which is used to store and dispense ice cubes from the refrigerator's ice maker. The bucket is made of durable plastic and features a handle for easy removal and installatio...

GE Grille Base - Part# WR74X10270 is a replacement part for a variety of GE refrigerators. It is the base of the grille that sits at the bottom of the refrigerator door. This part is made of plastic and measures approximately 15 inches wide by 4 inches deep. It has two mounting holes for attaching...

GE Grille Base - Part# WR74X10271 is a replacement part for GE refrigerators. It is a white plastic grille base that fits the bottom of the refrigerator and helps to protect the condenser coils from dust and debris. The grille base also helps to keep the refrigerator running efficiently by allowin...

GE Handle (Part# WR12X10624) is a replacement handle for GE refrigerators. It is made of durable plastic and is designed to fit most GE refrigerator models. The handle has a black finish and features a textured grip for easy handling. It measures approximately 4 inches wide by 2 inches deep and co...

GE Handle (Part# WR12X10625) is a replacement handle for GE refrigerators. It is made of durable plastic and is designed to fit most GE refrigerator models. The handle measures approximately 8 inches long and 1.5 inches wide, and it has a black finish. This handle is easy to install and can be use...

The GE Ice Dispenser Funnel (Part# WR17X12983) is a replacement part for GE refrigerators. It is used to direct ice from the ice maker into the ice bin. The funnel is made of durable plastic and has a white finish. It is designed to fit specific models of GE refrigerators and replaces part numbers...

The GE Jumper Tube Flow Meter - Part# WR02X13312 is a flow meter designed to measure the flow rate of liquids and gases. It is a simple, low-cost device that can be used in a variety of applications. The meter consists of two tubes connected by a jumper tube. The jumper tube contains an adjustable...

The GE Module Shelf FF - Part# WR71X10979 is a replacement part for a variety of GE refrigerators. It is a plastic shelf that fits into the freezer section of the refrigerator and provides additional storage space. The shelf has two adjustable dividers that can be used to organize items within the...

GE PAN ASM TOP - Part# WR32X10338 is a replacement part for a GE refrigerator. It is the top assembly for the refrigerator, which includes the door, handle, and hinges. The part number WR32X10338 is specific to certain models of GE refrigerators. This part is used to replace a damaged or worn out ...

The GE Slide Basket L H - Part# WR17X10917 is a replacement part for a variety of GE refrigerator models. It is an L-shaped slide basket that fits into the left side of the refrigerator and is used to store items such as fruits, vegetables, and other food items. The slide basket has two rails that...

The GE Slide Basket R H - Part# WR17X10916 is a replacement part for GE refrigerators. It is a right-hand side slide basket that fits into the refrigerator shelf. This part is made of durable plastic and helps to organize items in the refrigerator. It slides out for easy access to items stored in ...

The GE Spring Deflector Int. - Part# WR02X11768 is a part used in refrigerators to help keep the refrigerator door from slamming shut. It is a spring-loaded device that attaches to the top of the refrigerator door and helps to absorb the shock of closing the door. The spring deflector works by all...

GE Spring Torsion - Part# WR02X12256 is a replacement part for GE refrigerators. It is a spring torsion that helps to keep the refrigerator door closed. The spring torsion is made of metal and has a black finish. It measures approximately 2 inches in length and 1 inch in width. This part is used t...

GE Thimble Door (Part# WR01X10206) is a replacement part for a range or oven. It is used to secure the oven door in place and provide a tight seal. The thimble door is made of metal and has a spring-loaded design that allows it to be easily installed and removed. It fits most GE ranges and ovens, ...

GE Thimble Door - Part# WR01X10955 is a replacement part for GE dryers. It is a plastic door that fits into the front of the dryer and helps to keep lint and other debris from entering the drum. The thimble door also helps to keep moisture from escaping the drum, which can help to reduce drying ti...

GE Thimble Door - Part# WR01X10956 is a replacement part for GE brand dryers. It is a metal door that fits into the front of the dryer and provides access to the interior of the machine. The thimble door is used to access the lint filter, drum, and other components inside the dryer. It is made of ...

GE Tower Air FZ Lower is a part number WR17X10899 and is a replacement part for the GE refrigerator. It is the lower air tower that circulates air from the freezer to the refrigerator. This part helps to maintain an even temperature throughout the refrigerator and freezer compartments. The air tow...

GE Tray Custom Cool - Part# WR31X10077 is a replacement part for GE refrigerators. It is a plastic tray that fits into the freezer section of the refrigerator and helps to keep food items cold and fresh. The tray has an adjustable temperature control, allowing you to customize the temperature of t...

GE TRIM SHELF FZ - Part# WR38X10456 is a replacement part for GE refrigerators. It is a plastic shelf trim that fits into the refrigerator door to provide a secure and stable surface for storing food items. The trim shelf is designed to fit into the door of most GE refrigerators and provides an ad...