Model: GSD4940C01SS

GE Connector Model Select is a part number WD21X10024 that is used to connect two pieces of equipment together. It is a type of connector that is designed to be used in a variety of applications, including medical, industrial, and consumer electronics. The connector has two parts: the male and fem...

The GE General Electric Hotpoint PartsIPS Kenmore Dishwasher Drain Pump - Part# WD19X10015 is a replacement part for dishwashers. It is designed to pump water out of the dishwasher after it has been used. The pump works by creating suction to draw water out of the dishwasher and into a drain hose....

The GE General Electric RCA Hotpoint PartsIPS Kenmore Dishwasher Gasket Insert - Part# WD08X10015 is a replacement part for dishwashers. It is a rubber gasket that fits between the dishwasher door and the tub to create a watertight seal. This gasket helps to prevent water from leaking out of the d...

GE Hose Dual PU (Part# WD24X10006) is a two-piece, flexible water supply line for use with dishwashers and other appliances. It is made of polyurethane (PU) material, which is a type of plastic that is highly resistant to abrasion and chemicals. The two pieces are connected by a stainless steel cl...

The GE Lever Switch (Part# WD12X10019) is a replacement part for a variety of GE dishwashers. It is a single-pole, double-throw switch that controls the water level in the dishwasher. The switch has two positions: "High" and "Low". When the switch is in the "High" position, it allows more water to...

GE Retainer Com - Part# WD28X10018 is a part manufactured by General Electric (GE) for use in their dishwashers. It is a plastic retainer clip that is used to secure the lower dishrack to the side of the dishwasher tub. The clip is designed to fit into a groove on the side of the tub and hold the ...

The GE SCR 10-16X1/ - Part# WD02X10057 is a universal dishwasher installation kit. It includes all the necessary components for installing a dishwasher in a kitchen. The kit includes a mounting bracket, mounting screws, water supply line, drain hose, and electrical cord. The mounting bracket is de...

GE SCREW - Part# WH02X10002 is a replacement part for General Electric washing machines. It is a screw that is used to secure the top panel of the washing machine to the cabinet. The screw measures approximately 1/4 inch in diameter and 1-1/2 inches in length. It has a Phillips head and is made of...

GE SEQUENCE SWI - Part# WD21X10018 is a part used in General Electric washing machines. It is a sequence switch that controls the various cycles of the washing machine. The switch has three positions: off, wash, and spin. When the switch is in the off position, the machine will not run any cycles....

GE Switch Inter - Part# WD06X10002 is a replacement part for a range of GE appliances. It is a two-position switch that is used to control the operation of the appliance. The switch has two terminals and is designed to be mounted on the back of the appliance. It can be used to control the power, t...