Model: GSD4620Z02BB

The GE General Electric Hotpoint PartsIPS Kenmore Dishwasher Drain Pump - Part# WD19X10015 is a replacement part for dishwashers. It is designed to pump water out of the dishwasher after it has been used. The pump works by creating suction to draw water out of the dishwasher and into a drain hose....

GE Hose Dual PU (Part# WD24X10006) is a two-piece, flexible water supply line for use with dishwashers and other appliances. It is made of polyurethane (PU) material, which is a type of plastic that is highly resistant to abrasion and chemicals. The two pieces are connected by a stainless steel cl...

The GE Lever Switch (Part# WD12X10019) is a replacement part for a variety of GE dishwashers. It is a single-pole, double-throw switch that controls the water level in the dishwasher. The switch has two positions: "High" and "Low". When the switch is in the "High" position, it allows more water to...

GE Retainer Com - Part# WD28X10018 is a part manufactured by General Electric (GE) for use in their dishwashers. It is a plastic retainer clip that is used to secure the lower dishrack to the side of the dishwasher tub. The clip is designed to fit into a groove on the side of the tub and hold the ...

GE SCREW - Part# WH02X10002 is a replacement part for General Electric washing machines. It is a screw that is used to secure the top panel of the washing machine to the cabinet. The screw measures approximately 1/4 inch in diameter and 1-1/2 inches in length. It has a Phillips head and is made of...

GE SEQUENCE SWI - Part# WD21X10018 is a part used in General Electric washing machines. It is a sequence switch that controls the various cycles of the washing machine. The switch has three positions: off, wash, and spin. When the switch is in the off position, the machine will not run any cycles....

GE Switch Inter - Part# WD06X10002 is a replacement part for a range of GE appliances. It is a two-position switch that is used to control the operation of the appliance. The switch has two terminals and is designed to be mounted on the back of the appliance. It can be used to control the power, t...