Model: GSA22KEPCFWW

The GE Board ASM Encoder - Part# WR55X10150 is a part used in many General Electric (GE) refrigerators. It is an electronic control board that monitors and controls the refrigerator's temperature, defrost cycle, and other functions. The encoder is responsible for sending signals to the compressor,...

GE Bucket Ice D - Part# WR30X10017 is a replacement part for GE refrigerator ice makers. It is a plastic bucket that holds the ice cubes produced by the ice maker. The bucket has a handle and a lid to keep the ice cubes fresh and cold. The bucket also has an auger that helps to move the ice cubes ...

The GE Button Slide - Part# WR02X11174 is a replacement part for GE refrigerators. It is a white plastic slide that is used to hold the refrigerator door in place when it is closed. The slide has two tabs on the top and bottom that fit into slots on the refrigerator door, and when the door is clos...

GE CAM & THIMBLE FF - Part# WR02X11478 is a part used in many GE refrigerators. It is a cam and thimble assembly that helps to secure the refrigerator door in place. The cam and thimble are made of plastic and metal, and they are connected to the refrigerator door with two screws. The cam has a fl...

GE CAM & THIMBLE FF - Part# WR02X11479 is a part used in many GE refrigerators. It is a cam and thimble assembly that helps to adjust the door alignment of the refrigerator. The cam and thimble are made of plastic and metal, and they are connected to the door hinges. The cam is used to adjust the ...

GE Cvr Hng Wht - Part# WR02X11623 is a white cover for a hanging GE refrigerator. This part is used to cover the top of the refrigerator and protect it from dust and debris. It is made of durable plastic and is designed to fit GE refrigerators with a top-mounted freezer. The part number WR02X11623...

GE DART CLIP (Part# WR02X10431) is a part used in some GE refrigerators. It is a plastic clip that is used to secure the defrost heater to the evaporator. The clip helps to keep the heater in place and prevents it from becoming loose or disconnected. The clip also helps to reduce vibration and noi...

GE GASKET PAN C - Part# WR14X10084 is a replacement part for GE refrigerators. It is a gasket that seals the pan on the bottom of the refrigerator. The gasket helps to keep cold air in and warm air out, helping to maintain an even temperature inside the refrigerator. The gasket is made of durable ...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Evaporator Motor with Thermistor DC - Part# WR60X10074 is a motor that is used in refrigerators to circulate air and help maintain the desired temperature. The motor is powered by direct current (DC) and has a thermistor attached to it...

GE GRILL RECESS - Part# WR17X10712 is a replacement part for a GE refrigerator. It is a plastic grill that fits into the recess of the refrigerator door and helps to keep food items from falling out when the door is opened. The grill also helps to keep the temperature inside the refrigerator consi...

GE Handle SXS (Part# WR12X10332) is a replacement handle for GE side-by-side refrigerators. It is made of durable plastic and comes in a white finish. The handle measures approximately 11 inches long and 1.5 inches wide. It has two mounting holes on the back for easy installation. This handle is d...

GE Handle Tail - Part# WR12X10106 is a replacement part for GE refrigerators. It is a handle tail that attaches to the refrigerator door handle and provides a secure connection between the handle and the door. The part is made of durable plastic and is designed to fit most GE refrigerator models. ...

GE Harness LT & SW - Part# WR23X10245 is a wiring harness assembly for General Electric (GE) refrigerators. It is used to connect the refrigerator's light and switch components to the main power supply. The harness includes two leads, one for the light and one for the switch, as well as a ground w...

GE Housing Crusher Part# WR17X11505 is a replacement part for GE refrigerator ice makers. It is a plastic housing that holds the crusher blades and helps to crush the ice cubes into smaller pieces. The crusher blades are made of stainless steel and are designed to cut through the ice cubes quickly...

GE Housing Shield Dispenser (Part# WR17X11170) is a replacement part for General Electric refrigerators. It is a plastic housing that holds the water filter and dispenses water from the refrigerator. The part includes the housing, mounting bracket, and screws. This part helps to keep the water fil...

GE RECESS TRIM - Part# WR38X10301 is a trim kit designed to fit around the outside of a GE refrigerator. It is made of stainless steel and is designed to provide a finished look to the refrigerator. The trim kit includes two pieces that fit around the top and bottom of the refrigerator, as well as...

The GE Reflector Lamp Part# WR02X10578 is a replacement part for a variety of GE appliances. It is a 120-volt, 20-watt reflector lamp that is used to provide light in microwaves, ovens, and other appliances. The lamp has an average life of 2,000 hours and features a medium base for easy installati...

GE Shield Light FZ is a refrigerator light assembly designed for use with GE refrigerators. It is part number WR17X10765 and is a genuine OEM (Original Equipment Manufacturer) part. The light assembly includes the bulb, socket, and shield. The shield helps to protect the bulb from damage and also ...

The GE Support Slide Basket Rh - Part# WR72X10097 is a replacement part for a variety of GE dishwashers. It is designed to hold dishes and other items securely in the dishwasher. The basket is made of durable plastic and features a slide-out design that allows for easy access to the items stored i...

GE SUPPORT-FZ Part# WR02X11561 is a support bracket designed for use with certain GE refrigerator models. It is used to secure the refrigerator to the wall and provide additional stability. The bracket is made of steel and has two mounting holes for easy installation. It also includes two screws f...

The GE Wire Actuator Dispenser (Part# WR17X11403) is a device used to dispense wire for electrical wiring applications. It is designed to provide a consistent and reliable way to dispense wire in a variety of sizes and lengths. The device consists of a base unit, which houses the motor and spool, ...

HINGE CAM RISER - Part# WR02X11743 is a part used in some refrigerator models to help adjust the door hinge height. It is made of plastic and has two parts: a cam and a riser. The cam is inserted into the hinge and the riser is then placed on top of the cam. This part helps to adjust the height of...

The PIN HINGE BTM ADJ - Part# WR02X10592 is a part used in refrigerators and other appliances. It is a pin hinge bottom adjustment that is used to adjust the bottom of the refrigerator door. This part is made of plastic and metal and is designed to fit most refrigerator models. The pin hinge botto...