Model: GIE19JSNBRSS

The GE 10 UF Capacitor - Part# WR55X33686 is a motor run capacitor designed to help start and run an electric motor. It is a single-phase capacitor with a 10 microfarad (uf) rating and a voltage rating of 370 volts. The capacitor is used in many different types of motors, including air conditioner...

The GE 6mm x 4mm Lokring is a stainless steel fitting designed to provide a secure connection between two pipes. It is used in refrigeration and air conditioning systems to join two pipes together without the need for welding or soldering. The Lokring is easy to install and provides a reliable, le...

The GE 7mm x 5mm Lokring is a part used to secure two pieces of metal together. It is a type of mechanical fastener that uses a ring-shaped clamp to join two pieces of metal. The Lokring is designed to provide a secure, permanent connection between the two pieces of metal without the need for weld...

The GE 8mm x 6mm Lokring is a part used to secure two pipes together. It is made of stainless steel and is designed to provide a secure, leak-proof connection between two pipes. The Lokring has an 8mm outer diameter and a 6mm inner diameter, and it is designed to fit standard copper pipe sizes. Th...

GE Cplg. 1/4" - .079" - Part# WR97X10032 is a coupling manufactured by General Electric. It is a 1/4 inch diameter coupling with an inner diameter of .079 inches. This part is used to connect two pieces of tubing together, such as in a refrigerator water line. The part number WR97X10032 identifies...

GE Defrost Heater and Harness - Part# WR55X31113 is a replacement part for GE refrigerators. It is used to replace the existing defrost heater and harness in the refrigerator. The defrost heater helps to keep the evaporator coils from freezing up, which can cause problems with cooling. The harness...

The GE Foam Supply Nozzle - Part# WR02X31112 is a replacement part for a variety of GE refrigerators. It is used to dispense foam insulation into the refrigerator cabinet during the manufacturing process. The nozzle is made of plastic and has an adjustable spray pattern to ensure even coverage of ...

The GE Fresh Food Glass Shelf 19 - Part# WR71X31120 is a replacement shelf for select GE refrigerator models. This shelf is made of tempered glass and measures 19 inches wide by 18 inches deep. It has a white frame and can hold up to 25 pounds of food. The shelf is designed to help keep food fresh...

The GE Grey Door Plug (Part# WR02X21242) is a replacement part for General Electric (GE) refrigerators. It is a plastic plug that fits into the door of the refrigerator to seal off the interior from the outside environment. The plug helps to keep cold air in and warm air out, helping to maintain a...

The GE Machine Compartment Harness - Part# WR55X31301 is a wiring harness used in General Electric (GE) refrigerators. It is a replacement part for the main wiring harness in the refrigerator's machine compartment. The harness includes two connectors, one for the main power supply and one for the ...

GE Ol Ptcr Combo - Part# WR55X31519 is a combination of an overload protector and a thermal cut-off device. It is designed to protect the motor in a refrigerator from overheating and potential damage due to excessive current draw. The overload protector will trip if the current draw exceeds the ra...

The GE R600 Drier W/ Red Cap - Part# WR87X30875 is a replacement part for GE dryers. It is a red cap that fits over the heating element of the dryer. This part helps to keep the heating element from overheating and causing damage to the dryer. The red cap also helps to protect the wiring and other...

The GE Refrigerator Door Light Switch (Part# WR23X31507) is a replacement part for GE refrigerators. It is used to turn the refrigerator door light on and off. The switch is located on the inside of the refrigerator door and is activated when the door is opened or closed. The switch has two termin...

The GE Refrigerator Door Stop Doria Part# WR02X28286 is a replacement part for GE refrigerators. It is used to stop the refrigerator door from swinging open too far and damaging the refrigerator's interior components. The door stop is made of durable plastic and features a spring-loaded design tha...

The GE Refrigerator Handle Mount - Part# WR01X28657 is a replacement part for the handles on GE refrigerators. It is made of durable plastic and attaches to the refrigerator door handle with two screws. The handle mount helps to keep the handle securely in place and prevents it from becoming loose...

GE Scr 12-24 Tt Pnpsd .785 - Part# WR01X26527 is a part manufactured by General Electric (GE). It is a screw with a thread size of 12-24, a thread type of TT (trilobular thread), and a pitch of .785. The part number for this screw is WR01X26527. This screw is used in various GE appliances, such as...

The GE Water Valve - Part# WR57X32213 is a water valve designed to control the flow of water in a refrigerator. It is used to regulate the amount of water that flows into the ice maker and water dispenser. The valve is made of durable plastic and features an adjustable flow rate. It also has a bui...

The PIN HINGE BOTTOM - Part# WR02X27092 is a replacement part for a refrigerator door. It is used to secure the bottom of the door to the refrigerator frame. The part consists of two plastic pins that fit into two metal hinges on the bottom of the door. The pins are held in place by a spring-loade...

A washer hinge, also known as a dryer hinge, is a part used to attach the door of a washing machine or dryer to the appliance's frame. The washer hinge is typically made of metal and consists of two parts: a stationary bracket and a movable arm. The stationary bracket is attached to the frame of t...