Model: GIE18GTNDRWW

The GE 10 UF Capacitor - Part# WR55X33686 is a motor run capacitor designed to help start and run an electric motor. It is a single-phase capacitor with a 10 microfarad (uf) rating and a voltage rating of 370 volts. The capacitor is used in many different types of motors, including air conditioner...

The GE 7mm x 5mm Lokring is a part used to secure two pieces of metal together. It is a type of mechanical fastener that uses a ring-shaped clamp to join two pieces of metal. The Lokring is designed to provide a secure, permanent connection between the two pieces of metal without the need for weld...

GE Air Tower - Part# WR17X31193 is a replacement air tower for GE refrigerators. It is designed to replace the original air tower in select GE refrigerator models. The air tower is responsible for distributing cold air throughout the refrigerator and freezer compartments. It also helps to maintain...

GE Cplg. 1/4" - .079" - Part# WR97X10032 is a coupling manufactured by General Electric. It is a 1/4 inch diameter coupling with an inner diameter of .079 inches. This part is used to connect two pieces of tubing together, such as in a refrigerator water line. The part number WR97X10032 identifies...

GE Defrost Heater and Harness - Part# WR55X31113 is a replacement part for GE refrigerators. It is used to replace the existing defrost heater and harness in the refrigerator. The defrost heater helps to keep the evaporator coils from freezing up, which can cause problems with cooling. The harness...

GE FF Door Gasket Part# WR14X27231 is a replacement part for GE refrigerators. It is a flexible rubber gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket helps to maintain the temperature inside the refrigerator and prevents energy loss. It also helps t...

The GE Foam Supply Nozzle - Part# WR02X31112 is a replacement part for a variety of GE refrigerators. It is used to dispense foam insulation into the refrigerator cabinet during the manufacturing process. The nozzle is made of plastic and has an adjustable spray pattern to ensure even coverage of ...

The GE GASKET DOOR FZ WW - Part# WR14X27230 is a replacement part for GE refrigerators. It is a white plastic door gasket that fits around the perimeter of the refrigerator door to create an airtight seal. This helps to keep cold air in and warm air out, which helps to maintain the desired tempera...

GE Hinge Top and Pin Asm - Part# WR13X27091 is a replacement part for General Electric (GE) brand refrigerators. It is a two-piece assembly that includes the top hinge and pin. The top hinge attaches to the refrigerator door and the pin slides into the bottom of the door, allowing it to open and c...

The GE Machine Compartment Harness - Part# WR55X31301 is a wiring harness used in General Electric (GE) refrigerators. It is a replacement part for the main wiring harness in the refrigerator's machine compartment. The harness includes two connectors, one for the main power supply and one for the ...

GE Ol Ptcr Combo - Part# WR55X31519 is a combination of an overload protector and a thermal cut-off device. It is designed to protect the motor in a refrigerator from overheating and potential damage due to excessive current draw. The overload protector will trip if the current draw exceeds the ra...

The GE Refrigerator Door Light Switch (Part# WR23X31507) is a replacement part for GE refrigerators. It is used to turn the refrigerator door light on and off. The switch is located on the inside of the refrigerator door and is activated when the door is opened or closed. The switch has two termin...

The GE Water Valve - Part# WR57X32213 is a water valve designed to control the flow of water in a refrigerator. It is used to regulate the amount of water that flows into the ice maker and water dispenser. The valve is made of durable plastic and features an adjustable flow rate. It also has a bui...

GE White Handle - Part# WR12X31132 is a replacement handle for a variety of GE refrigerators. It is made of white plastic and features a textured finish for a secure grip. The handle measures approximately 11 inches long and 1.5 inches wide, and it has two mounting holes for easy installation. Thi...

A washer hinge, also known as a dryer hinge, is a part used to attach the door of a washing machine or dryer to the appliance's frame. The washer hinge is typically made of metal and consists of two parts: a stationary bracket and a movable arm. The stationary bracket is attached to the frame of t...