Model: GIE18DTNDRBB

The GE 6mm x 4mm Lokring is a stainless steel fitting designed to provide a secure connection between two pipes. It is used in refrigeration and air conditioning systems to join two pipes together without the need for welding or soldering. The Lokring is easy to install and provides a reliable, le...

The GE 7mm x 5mm Lokring is a part used to secure two pieces of metal together. It is a type of mechanical fastener that uses a ring-shaped clamp to join two pieces of metal. The Lokring is designed to provide a secure, permanent connection between the two pieces of metal without the need for weld...

The GE 8mm x 6mm Lokring is a part used to secure two pipes together. It is made of stainless steel and is designed to provide a secure, leak-proof connection between two pipes. The Lokring has an 8mm outer diameter and a 6mm inner diameter, and it is designed to fit standard copper pipe sizes. Th...

GE Air Tower - Part# WR17X31193 is a replacement air tower for GE refrigerators. It is designed to replace the original air tower in select GE refrigerator models. The air tower is responsible for distributing cold air throughout the refrigerator and freezer compartments. It also helps to maintain...

GE Black Handle - Part# WR12X31135 is a replacement handle for GE refrigerators. It is made of black plastic and measures approximately 4.5 inches wide by 3.5 inches tall. The handle has two mounting holes and comes with two screws for installation. This handle is designed to fit most GE refrigera...

GE Cplg. 1/4" - .079" - Part# WR97X10032 is a coupling manufactured by General Electric. It is a 1/4 inch diameter coupling with an inner diameter of .079 inches. This part is used to connect two pieces of tubing together, such as in a refrigerator water line. The part number WR97X10032 identifies...

GE Defrost Heater and Harness - Part# WR55X31113 is a replacement part for GE refrigerators. It is used to replace the existing defrost heater and harness in the refrigerator. The defrost heater helps to keep the evaporator coils from freezing up, which can cause problems with cooling. The harness...

The GE Foam Supply Nozzle - Part# WR02X31112 is a replacement part for a variety of GE refrigerators. It is used to dispense foam insulation into the refrigerator cabinet during the manufacturing process. The nozzle is made of plastic and has an adjustable spray pattern to ensure even coverage of ...

The GE Fresh Food Wire Shelf 28 - Part# WR71X31099 is a replacement shelf for GE refrigerators. It is designed to fit in the fresh food section of the refrigerator and is made of durable wire construction. The shelf measures 28 inches wide and has a weight capacity of up to 75 pounds. It features ...

GE GASKET DOOR FF DG - Part# WR14X27235 is a replacement part for GE refrigerators. It is a door gasket that fits the fresh food door of the refrigerator. The gasket helps to keep the cold air inside the refrigerator and prevent warm air from entering. It also helps to reduce energy consumption by...

The GE GASKET DOOR FZ DG - Part# WR14X27234 is a replacement part for a refrigerator door. It is a flexible gasket that fits around the perimeter of the refrigerator door to create an airtight seal. This helps to keep cold air in and warm air out, ensuring that food stays fresh and cool. The gaske...

The GE Machine Compartment Harness - Part# WR55X31301 is a wiring harness used in General Electric (GE) refrigerators. It is a replacement part for the main wiring harness in the refrigerator's machine compartment. The harness includes two connectors, one for the main power supply and one for the ...

GE Ol Ptcr Combo - Part# WR55X31519 is a combination of an overload protector and a thermal cut-off device. It is designed to protect the motor in a refrigerator from overheating and potential damage due to excessive current draw. The overload protector will trip if the current draw exceeds the ra...

The GE R600 Drier W/ Red Cap - Part# WR87X30875 is a replacement part for GE dryers. It is a red cap that fits over the heating element of the dryer. This part helps to keep the heating element from overheating and causing damage to the dryer. The red cap also helps to protect the wiring and other...

The GE Refrigerator Door Light Switch (Part# WR23X31507) is a replacement part for GE refrigerators. It is used to turn the refrigerator door light on and off. The switch is located on the inside of the refrigerator door and is activated when the door is opened or closed. The switch has two termin...

GE Scr 12-24 Tt Pnpsd .785 - Part# WR01X26527 is a part manufactured by General Electric (GE). It is a screw with a thread size of 12-24, a thread type of TT (trilobular thread), and a pitch of .785. The part number for this screw is WR01X26527. This screw is used in various GE appliances, such as...

The GE Water Valve - Part# WR57X32213 is a water valve designed to control the flow of water in a refrigerator. It is used to regulate the amount of water that flows into the ice maker and water dispenser. The valve is made of durable plastic and features an adjustable flow rate. It also has a bui...

The PIN HINGE BOTTOM - Part# WR02X27092 is a replacement part for a refrigerator door. It is used to secure the bottom of the door to the refrigerator frame. The part consists of two plastic pins that fit into two metal hinges on the bottom of the door. The pins are held in place by a spring-loade...

A washer hinge, also known as a dryer hinge, is a part used to attach the door of a washing machine or dryer to the appliance's frame. The washer hinge is typically made of metal and consists of two parts: a stationary bracket and a movable arm. The stationary bracket is attached to the frame of t...