Model: GFWH1200H1WW

The GE 2 IN 3 OUT WATER VALVE - Part# WH13X10029 is a water valve designed to control the flow of water in a washing machine. It is used to regulate the amount of hot and cold water that enters the washer, as well as the amount of water that is drained from the washer. The valve has two inlet port...

GE Damper Shock Part# WH01X20826 is a replacement part for GE washing machines. It is a shock absorber that helps to reduce the vibration and noise caused by the spinning of the washer tub. The damper shock is made of rubber and plastic and attaches to the back of the washer tub. It helps to keep ...

The GE Damper_Pin - Part# WH01X10261 is a replacement part for General Electric (GE) washing machines. It is a small metal pin that fits into the damper assembly of the washing machine. The pin helps to keep the damper in place and prevents it from moving or vibrating during operation. The pin als...

GE Door Boot Bellows Gasket - Part# WH08X20827 is a replacement part for GE washing machines. It is a rubber gasket that seals the door of the washing machine to prevent water from leaking out. The gasket is made of durable rubber and is designed to fit around the door opening of GE washing machin...

GE Door Lock Part# WH10X20821 is a digital door lock designed to provide secure access to your home or office. It features a keypad entry system with up to 8 user codes, allowing you to assign different codes for different people. The lock also has an auto-lock feature that will automatically lock...

GE Door Plunger Part# WH01X20823 is a replacement part for GE washing machines. It is a plastic plunger that fits into the door latch of the washing machine and helps to keep the door closed during operation. The plunger is designed to fit into the door latch and prevent it from opening during ope...

GE DRAIN_HOSE_COUPLING - Part# WH01X10266 is a part used in washing machines to connect the drain hose to the pump. It is made of plastic and is designed to fit all GE washing machines. The coupling has two parts, one that fits into the drain hose and one that fits into the pump. It is designed to...

GE Drawer Latch Level Part# WH01X10245 is a replacement part for General Electric (GE) washers and dryers. It is used to secure the drawer in place when the washer or dryer is in use. The latch level has two parts: a latch and a lever. The latch is attached to the side of the washer or dryer and t...

GE GASKET INSIDE CLAMP - Part# WH01X10277 is a replacement part for GE washing machines. It is a rubber gasket that fits inside the clamp on the water inlet valve. The gasket helps to create a tight seal between the valve and the water line, preventing leaks. This part is made of durable rubber an...

GE GASKET OUTSIDE CLAMP - Part# WH01X10279 is a replacement part for GE washing machines. It is a rubber gasket that fits around the outside of the washing machine's drum. The gasket helps to keep water from leaking out of the machine and onto the floor. It also helps to reduce noise and vibration...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Clothes Dryer and Clothes Washer Washing Machine Stacking Kit - Part# WE25X10028 is a kit that allows you to stack your washer and dryer on top of each other. This kit includes all the necessary hardware and instructions for installation. It al...

GE Inside Drain Hose (Part# WH41X10127) is a replacement part for GE washing machines. It is a flexible plastic hose that connects the drain pump to the drain line. The hose is designed to be durable and withstand high water pressure. It also helps to prevent clogs and leaks in the drain line. The...

GE Motor (Dropship) - Part# WH20X23194 is a motor manufactured by General Electric (GE). It is a single-phase, capacitor-start, induction-run motor designed for use in washing machines. This motor is designed to provide reliable and efficient operation in residential and commercial applications. T...

GE OUTSIDE_DRAIN_HOSE - Part# WH41X10126 is a replacement part for GE washing machines. It is a flexible hose that connects the washer's drain pump to the outside drain. This hose helps to direct the water from the washer to an external drain, such as a floor drain or sink. The hose is made of dur...

GE Pressure Switch - Part# WH12X20819 is a pressure switch designed to control the water level in a washing machine. It is used to detect the water level in the washer and turn off the water supply when it reaches a certain level. The switch is designed to be mounted on the back of the washer and ...

GE Pump - Part# WH23X20825 is a direct drive washing machine pump manufactured by General Electric. It is designed to replace the original pump in GE washing machines. This pump is made of durable plastic and metal components and features a 1/2 HP motor that can handle up to 150 gallons per minute...

GE Rear Tub Asm - Part# WH45X20833 is a replacement part for GE washing machines. It is the rear tub assembly, which includes the outer tub, inner tub, drive shaft, and bearings. The rear tub assembly is responsible for supporting the inner wash basket and spinning the clothes during the wash cycl...

The GE Screw M5 12 - Part# WH02X10234 is a metric-sized screw manufactured by General Electric. It is a 12mm long, 5mm diameter screw with a Phillips head. The part number WH02X10234 is used to identify the specific screw and its characteristics. This particular screw is made of steel and has a zi...

GE Screw St4 16 - Part# WH02X10222 is a replacement part for GE washing machines. It is a 4-16 x 1/2 inch Phillips head screw used to secure the top panel of the washer to the cabinet. The screw is made of steel and has a zinc plated finish for corrosion resistance. This part is compatible with ma...

GE SCREW ST8 45 - Part# WH02X10210 is a replacement part for General Electric (GE) washing machines. It is an 8-32 x 1/2 inch stainless steel screw with a 45 degree angle head. This screw is used to secure the top panel of the washing machine to the cabinet. It is also used to secure the control p...

GE Spring_Hanger - Part# WH01X10251 is a part used in washing machines to help support the suspension system. It is made of metal and has a spring-loaded design that helps absorb shock and vibration from the washer's spin cycle. The spring hanger helps keep the washer balanced and prevents it from...

The GE TOP PANEL SUB - Part# WH44X10297 is a replacement part for the top panel of a washing machine. It is made of durable plastic and is designed to fit most GE top-load washers. This part includes the control panel, knob, and mounting screws. It also includes the water level switch and temperat...

The GE U-Shape Drain Hose (Part# WH41X10133) is a replacement part for GE washing machines. It is a flexible, corrugated drain hose that connects the washing machine's pump to the house drain. The U-shape of the hose helps to prevent kinking and allows for a smooth flow of water from the washer to...

GE Washer Part# WH02X10205 is a replacement part for GE washing machines. It is a plastic washer that fits between the inner and outer tubs of the washing machine. This part helps to keep water from leaking out of the washing machine during the wash cycle. It also helps to reduce noise and vibrati...