Model: GFE24JGKLFWW

GE Blower Assembly - Part# WR60X25068 is a replacement part for General Electric refrigerators. It is the blower assembly that circulates air throughout the refrigerator to keep it cool. This part includes the blower motor, fan blade, and housing. The blower motor is responsible for moving air thr...

GE Damper Asm - Part# WR60X27396 is a part used in GE refrigerators. It is a replacement part for the damper assembly in the refrigerator. The damper assembly helps to regulate the air flow between the refrigerator and freezer compartments. It is designed to open and close as needed to maintain a ...

GE Duct Door Asm - Part# WR17X25006 is a replacement part for a variety of GE refrigerators. It is the assembly that covers the duct opening in the back of the refrigerator. This part includes the door, hinge, and mounting screws. The door helps to keep warm air from entering the refrigerator and ...

The GE Evaporator Fan Blade (Part# WR60X30922) is a replacement part for refrigerators. It is a fan blade that is used to circulate air through the evaporator coils in the refrigerator. The fan blade helps to keep the temperature inside the refrigerator consistent and cool. The fan blade is made o...

The GE Gasket Tower FF (Part# WR14X24747) is a replacement part for a variety of GE refrigerators. It is a gasket that seals the door of the refrigerator to keep cold air in and warm air out. The gasket is made of durable rubber and is designed to fit perfectly around the door frame. It helps to e...

The GE GEA Badge Flat Chrome - Part# WR04X29375 is a replacement part for GE refrigerators. It is a flat chrome badge that is used to replace the existing badge on the front of the refrigerator. The badge measures approximately 3 inches in diameter and has a brushed chrome finish. It features an a...

The GE General Electric Hotpoint PartsIPS Kenmore Refrigerator Condenser Fan BLADE - Part# WR60X24484 is a replacement part for refrigerators. It is a fan blade that is used to circulate air around the condenser coils in the refrigerator. The fan blade helps to keep the condenser coils cool, which...

The GE Harness Evaporator - Part# WR55X28649 is a replacement part for GE refrigerators. It is a wiring harness that connects the evaporator fan motor to the main control board. This harness is used to provide power to the evaporator fan motor, which helps circulate air throughout the refrigerator...

GE Heater Defrost Assembly (Part# WR51X10108) is a replacement part for GE refrigerators. It is used to regulate the temperature inside the refrigerator and to prevent the formation of ice on the evaporator coils. The assembly includes a heater, a thermostat, and a defrost timer. The heater is res...

GE Hinge Bushing Bb - Part# WR02X24875 is a replacement part for GE brand refrigerators. It is a plastic bushing that fits into the hinge of the refrigerator door and helps to reduce friction and noise when the door is opened and closed. The bushing also helps to keep the door aligned properly. Th...

GE Hinge Bushing Bb - Part# WR02X24876 is a replacement part for General Electric (GE) brand refrigerators. It is a plastic bushing that fits between the door hinge and the refrigerator cabinet. The bushing helps to reduce friction and noise when the door is opened and closed. It also helps to kee...

The GE L-Fin Al Condenser 10 Pass - Part# WR87X32326 is a condenser coil designed for use in air conditioning systems. It is made of aluminum and has 10 passes, which means that the refrigerant flows through the coil 10 times before exiting. The coil is designed to maximize heat transfer efficienc...

GE Light Housing - Part# WR55X30124 is a replacement part for GE refrigerator models. It is a light housing assembly that includes the bulb socket, lens, and mounting bracket. The light housing is used to hold the light bulb in place and provide illumination inside the refrigerator. The part numbe...

The GE Light Switch - Part# WR23X30156 is a single-pole light switch designed to control a single light fixture or other electrical device. It is rated for 120 volts and 15 amps, and is UL listed for safety. The switch has a toggle-style design with an off/on switch on the front. It also features ...

The GE Lower Cabinet Harness - Part# WR23X30131 is a wiring harness that is used to connect the refrigerator's electrical components to the main power source. It is designed for use with select GE and Hotpoint refrigerators. The harness includes two connectors, one for the refrigerator's main powe...

GE Overload PTCR Combo - Part# WR08X25466 is a combination overload protector and PTCR (Positive Temperature Coefficient Resistor) designed to protect electric motors from damage due to overloads and overheating. The device features a built-in thermal overload protector that trips when the motor c...

GE Scr 10-14 Pl Flt20 3/4 S - Part# WR01X10939 is a self-tapping screw manufactured by General Electric. It is made of steel and has a flat head with a Phillips drive. The screw has a 10-14 thread size, a 3/4 inch length, and is zinc plated for corrosion resistance. This screw is used to secure pa...

GE Shelf Cantilever Asm - Part# WR71X24966 is a replacement part for GE refrigerators. It is a shelf cantilever assembly that is used to support the shelves in the refrigerator. The shelf cantilever assembly consists of two metal arms that are connected to the back wall of the refrigerator and ext...

GE Shelf Half Asm - Part# WR71X24965 is a replacement part for GE refrigerators. It is a shelf half assembly that is used to replace the existing shelf in the refrigerator. The shelf half assembly includes two shelves, one on each side of the refrigerator, and two brackets that attach to the back ...

The GE SLIDE BASKET LOWER FZ - Part# WR72X24815 is a replacement part for a refrigerator. It is the lower slide basket for the freezer section of the refrigerator. This part is made of plastic and has two metal rails that allow it to slide in and out of the freezer compartment. The basket measures...

The GE Spring Duct Door - Part# WR01X25007 is a replacement part for GE refrigerators. It is a spring-loaded door that helps to keep the cold air in the refrigerator and prevent warm air from entering. The door is made of durable plastic and has a white finish. It measures approximately 8 inches w...

GE Support Veg Pan Asm - Part# WR02X13504 is a replacement part for GE refrigerators. It is a vegetable pan assembly that fits in the refrigerator's crisper drawer. The part includes the plastic pan, the plastic frame, and the metal support rails. The vegetable pan assembly helps to keep fruits an...

GE Valve & Guard Assembly - Part# WR57X26303 is a genuine OEM (Original Equipment Manufacturer) part used in refrigerators. It is a water valve and guard assembly that helps to regulate the flow of water into the refrigerator. The valve is made of plastic and metal components, and it includes a gu...

The GE Water Valve (Part# WR57X25054) is a replacement part for GE refrigerators. It is a dual solenoid water valve that controls the flow of water from the water line to the refrigerator. The valve has two solenoids, one for the ice maker and one for the water dispenser. The valve is designed to ...