Model: GFD65GSPN0SN

GE Door Latch - Part# WE01X29738 is a replacement part for GE washing machines. It is used to secure the door of the washing machine and keep it closed during operation. The latch is made of plastic and metal and has two parts: a hook that attaches to the door and a catch that attaches to the mach...

GE Drive Belt - Part# WE03X29704 is a replacement drive belt for GE washing machines. It is made of rubber and measures approximately 3/8" wide and 85" long. This belt is used to connect the motor to the transmission in order to spin the drum during the wash cycle. It is an OEM (Original Equipment...

The GE Drum Baffle - Part# WE13X29725 is a replacement part for a GE dryer. It is used to help reduce the noise from the dryer by dampening the sound of the drum as it rotates. The baffle is made of plastic and fits into the front of the dryer drum. It helps to keep clothes from getting caught in ...

GE Grille Housing - Part# WE13X29598 is a replacement part for a variety of GE dryers. It is the outer housing that covers the front of the dryer and provides protection for the internal components. The grille housing is made of plastic and includes two mounting screws. This part is used to replac...

The GE Igniter Flat (Part# WE04X10183) is a replacement part for the oven in General Electric (GE) ranges. It is a flat, metal igniter that works with the oven’s gas valve to ignite the gas and create heat for cooking. The igniter is located in the oven cavity and is connected to the gas valve by ...

GE KIT NAT GAS TO PROPANE - Part# WE25M87 is a conversion kit designed to convert a natural gas appliance to propane. The kit includes all the necessary components to make the conversion, including a propane orifice, a propane regulator, and an adapter fitting. The kit also includes instructions f...

GE Leveling Leg Part# WE01X29697 is a leveling leg designed for use with GE front-load washers and dryers. The leveling leg is used to adjust the height of the appliance, allowing it to be level on uneven surfaces. It features a durable steel construction and an adjustable height range of 1-1/2" t...

The GE Lint Filter (Part# WE16X29597) is a replacement lint filter for GE dryers. It is designed to capture lint, dust, and other debris from the air that passes through the dryer during the drying cycle. The filter is made of a durable plastic material and has a mesh screen that helps to trap lin...

GE Main Harness Gas - Part# WE08X30589 is a gas harness assembly for GE dryers. It is used to connect the gas valve to the igniter and other components in the dryer. The harness includes two wire leads, one for the igniter and one for the gas valve. This part is made of durable plastic and metal m...

A GE Outlet Thermistor - Part# WE04X29714 is a temperature-sensing device used in some GE appliances. It is a small, round device that fits into the outlet of the appliance and monitors the temperature of the air around it. The thermistor is designed to detect when the temperature rises above a ce...

The GE Power Cord - Part# WE08X29689 is a replacement power cord for select GE dryers. It is a three-wire cord that is 4 feet long and has a right angle plug. The cord has a NEMA 10-30P plug configuration and is rated for 30 amps and 250 volts. It is UL listed and CSA certified for safety. This po...

GE Roller ASM Wheel - Part# WE03X10016 is a replacement part for a variety of GE dryers. It is a roller wheel assembly that helps the drum of the dryer to rotate smoothly. The wheel is made of durable plastic and metal components and includes two bearings and two axles. The wheel is designed to fi...

GE SCR 10-18 PL - Part# WH2X1194 is a Single Pole, Single Throw (SPST) switch designed for use in residential and commercial applications. It is rated for 10 amps at 120/277 volts AC. The switch has a plastic body and a white finish. It features a push-in terminal connection and is UL listed. This...

GE SCREW - Part# WH2X930 is a self-tapping screw manufactured by General Electric. It is designed for use in a variety of applications, including electrical and plumbing installations. The screw is made from steel and has a zinc-plated finish for corrosion resistance. It features a Phillips head d...

The GE Thermostat 2 - Part# WE04X10190 is a digital thermostat designed to provide precise temperature control for residential and commercial applications. It features a large, easy-to-read LCD display that shows the current temperature and set point. The thermostat also has a backlight for nightt...

GE Wire Tie - Part# WH01X10704 is a part used in General Electric (GE) appliances. It is a plastic tie that is used to secure wires and cables in place. The tie is made of durable plastic and has a looped end for easy installation. It can be used to bundle multiple wires together or to secure a si...