Model: GDT540PSM0SS

GE Ac Harness Asm - Part# WD21X24939 is a replacement part for General Electric air conditioners. It is an assembly of wires and connectors that connect the various components of the air conditioner together. This harness includes a power cord, control board, fan motor, compressor, and other compo...

GE Basket Asm Silverware (Part# WD28X24469) is a replacement part for GE dishwashers. It is a silverware basket assembly that fits into the lower rack of the dishwasher. The basket is designed to hold silverware and other utensils during the washing cycle. The basket is made of durable plastic and...

GE CLAMP - Part# WD01X24246 is a clamp designed to secure the dishwasher drain hose to the garbage disposal. It is made of durable plastic and is designed to fit most standard garbage disposals. The clamp has two adjustable arms that can be tightened with a screwdriver or nut driver. The arms are ...

GE Console Cvr Graphic Asm - Part# WD34X24429 is a part used in some GE washing machines. It is the console cover graphic assembly, which includes the graphic overlay and the console cover. The graphic overlay is a plastic piece that covers the console and has all of the buttons and labels printed...

GE Console Top Control is a replacement part for GE dishwashers. It is a control panel that sits on top of the dishwasher and allows users to select the cycle, start and stop the dishwasher, and adjust settings. The part number WD12X10469 is for a specific model of GE Console Top Control. This con...

GE Control Board Fuse 4.1 Amp - Part# WD21X25696 is a replacement fuse for the control board in a variety of GE appliances. This fuse is designed to protect the control board from damage due to power surges or other electrical problems. It is rated at 4.1 amps and is made of a durable plastic mate...

GE Drain Pump Assembly (Part# WD19X24394) is a replacement part for GE washing machines. It is designed to pump out the water from the washer during the drain cycle. The pump assembly includes the motor, impeller, and housing. The motor is responsible for spinning the impeller which creates suctio...

GE Gasket Beach Plastic - Part# WD08X21894 is a replacement part for a variety of GE dishwashers. It is a plastic gasket that fits between the dishwasher door and the tub. This gasket helps to create a watertight seal, preventing water from leaking out of the dishwasher. The gasket also helps to r...

The GE General Electric RCA Hotpoint PartsIPS Kenmore Dishwasher Plastic Tub Seal Gasket - Part# WD08X22094 is a replacement part for dishwashers. It is a plastic gasket that seals the tub of the dishwasher to prevent water from leaking out. The gasket is made of durable plastic and is designed to...

GE Harness Asm Door - Part# WD21X10545 is a part for a General Electric (GE) dishwasher. It is the wiring harness assembly for the door of the dishwasher. This part includes the wiring harness, the door switch, and the door latch assembly. The wiring harness connects to the control board and allow...

GE MID CONDUIT ASSM - Part# WD22X10090 is a part used in many GE dishwashers. It is a mid-conduit assembly that connects the water inlet valve to the water supply line. The part includes a plastic conduit, two clamps, and two gaskets. The conduit is designed to direct the water from the inlet valv...

GE O-Ring - Part# WD08X23817 is a replacement part for General Electric (GE) dishwashers. It is an O-ring that seals the connection between the water inlet valve and the water supply line. The O-ring helps to prevent water from leaking out of the dishwasher. This part is made of rubber and measure...

GE Plate Detergent - Part# WD12X10420 is a dishwasher detergent designed to clean dishes and other kitchen items. It is a concentrated formula that is designed to be used in both hard water and soft water areas. The detergent contains a blend of surfactants, enzymes, and other cleaning agents that...

GE Roller Rack - Part# WD12X22829 is a replacement part for GE dishwashers. It is a roller rack that helps to hold dishes in place during the dishwashing cycle. The roller rack has two rollers on each side and a handle in the middle for easy removal. The rollers are made of durable plastic and the...

GE SCREW - Part# WD2X295 is a self-tapping screw manufactured by General Electric. It is a Type A, #8-32 x 2-1/2 inch long, Phillips head screw. The screw is made of steel and has a zinc plated finish for corrosion resistance. It is designed for use in applications such as mounting panels, securin...

GE Silicone Light Pipe - Part# WD12X10454 is a flexible, silicone-based light pipe designed to be used in a variety of lighting applications. It is made from a combination of silicone and glass fibers, which provide superior flexibility and durability. The light pipe can be used to direct light fr...

GE Slide Rack - Part# WD30X24251 is a replacement part for GE dishwashers. It is a metal rack that slides in and out of the dishwasher to hold dishes and other items during the washing cycle. The rack has a durable construction with an adjustable height feature that allows it to fit most GE dishwa...

GE Vent - Grey/ Hybrid - Part# WD12X10471 is a replacement part for GE dishwashers. It is a grey hybrid vent that helps to keep the dishwasher running efficiently by allowing air to circulate throughout the unit. The vent helps to reduce moisture and humidity levels in the dishwasher, which can le...

HANDLE ASM PROFILE-GE Part# WD09X21321 is a replacement handle assembly for General Electric (GE) dishwashers. This part is made of plastic and includes the handle, screws, and mounting bracket. It is designed to fit GE dishwashers that have a top-mounted control panel. The handle assembly helps t...