Model: GDE23ETEARWW

The GE Board ASM Main Control - Part# WR55X10996 is a replacement main control board for select GE refrigerators. This board is responsible for controlling the operation of the refrigerator, including temperature settings, defrost cycles, and other functions. It is designed to replace the original...

GE Bracket Lower - Part# WR72X10299 is a replacement part for a refrigerator. It is used to secure the refrigerator door to the frame of the appliance. The bracket is made of metal and has two holes for mounting screws. It attaches to the bottom of the refrigerator door and helps keep it in place ...

GE Bracket Lower - Part# WR72X10300 is a part used in refrigerators. It is a lower bracket that is used to secure the refrigerator door to the refrigerator cabinet. The bracket is made of metal and has two holes for mounting screws. It is designed to fit GE brand refrigerators and can be used as a...

GE Damper Duct Assembly (Part# WR17X12573) is a replacement part for GE refrigerators. It is a metal duct assembly that helps to regulate the air flow in the refrigerator. The damper duct assembly consists of two parts: the damper and the duct. The damper is a flap that opens and closes to control...

The GE FASTENER DOOR HANDLE - Part# WR01X11007 is a replacement part for a variety of GE refrigerator models. It is a plastic handle that attaches to the door of the refrigerator and allows you to open and close it. The handle is made of durable plastic and features a white finish. It is designed ...

GE GASKET FF INLET - Part# WR14X10268 is a replacement part for GE refrigerators. It is a rubber gasket that seals the inlet of the refrigerator to prevent cold air from escaping and warm air from entering. The gasket is made of durable rubber and fits around the inlet opening of the refrigerator....

GE Heater Defrost Assembly (Part# WR51X10108) is a replacement part for GE refrigerators. It is used to regulate the temperature inside the refrigerator and to prevent the formation of ice on the evaporator coils. The assembly includes a heater, a thermostat, and a defrost timer. The heater is res...

The GE Ice Drawer Cover (Part# WR17X12564) is a replacement part for GE refrigerators. It is a white plastic cover that fits over the ice drawer in the refrigerator. The cover helps to keep the ice drawer clean and free from dust and debris. It also helps to keep the ice from spilling out of the d...

GE Motor DC Evap Fan Asm - Part# WR60X10277 is a replacement evaporator fan motor assembly for GE refrigerator models. This part is used to circulate air through the refrigerator and freezer compartments in order to maintain proper temperatures. The motor assembly includes the motor, fan blade, mo...

GE Overload Ptcr Combo - Part# WR07X10133 is a combination overload protector and push-to-reset circuit breaker designed for use in General Electric (GE) refrigerators. This part is used to protect the compressor motor from damage due to an overload or short circuit. It is a single-pole, 15 amp br...

GE Scr 1/4-20 Rt Flat 3/4 S - Part# WR01X10885 is a right-hand thread, flat head, 1/4-inch diameter, 20 threads per inch (TPI) screw manufactured by General Electric (GE). The part number is WR01X10885. This screw is 3/4 inches long and has a slotted drive type. It is made of steel and has a zinc ...

GE Scr 12-24 Tt Hx 7/8 S - Part# WR01X10792 is a replacement part for a GE refrigerator. It is a defrost heater assembly that is used to keep the evaporator coils from freezing up in the refrigerator. The part number WR01X10792 is the manufacturer's part number for this specific defrost heater ass...

GE SCR 8-18 DG TRT20 5/8 S - Part# WR01X10621 is a part number for a GE refrigerator start relay. This start relay is used to control the compressor motor in the refrigerator. It is an 8-pin single-phase relay with a 20A rating and 5/8" spade terminals. The relay is designed to be used with GE ref...

A GE set screw, part# WR01X10450, is a type of fastener used to secure two or more objects together. It is a threaded fastener that is inserted into a pre-drilled hole and tightened with a wrench or screwdriver. The set screw has a flat head and is made of steel for strength and durability. It is ...

A GE set screw, part# WR01X20424, is a type of fastener used to secure two or more objects together. It is a threaded fastener that has no head and is designed to be inserted into a pre-drilled hole. The set screw is tightened by turning it clockwise until it is firmly in place. The set screw has ...

GE Shelf Glass Assembly (Part# WR71X10904) is a replacement part for GE refrigerators. It is a clear glass shelf that fits into the refrigerator door and provides additional storage space. The shelf is made of tempered glass and has a white plastic frame. It measures approximately 16 inches wide b...

GE SLIDE PAN LH - Part# WR72X10073 is a left-hand slide pan for GE refrigerators. It is made of durable plastic and is designed to fit the bottom of the refrigerator. The slide pan helps to keep food and other items from falling out of the refrigerator when it is opened. It also helps to keep the ...

GE Slide Pan Rh - Part# WR72X10072 is a replacement part for a GE refrigerator. It is the right-hand side slide pan that fits underneath the refrigerator to catch any water or condensation that may drip from the refrigerator. The slide pan helps to keep the area around the refrigerator clean and d...